Metal decking definition

Metal decking means a commercially manufactured, structural grade, cold-rolled metal panel formed into a series of parallel ribs. As used in this part, the term includes metal floor and roof decks, standing seam metal roofs, other metal roof systems, and other products, such as bar gratings, checker plate, expanded metal panels, and similar products. After installation and proper fastening, these decking materials serve a combination of functions, including, but not limited to any of the following:
Sample 1Sample 2Sample 3
Metal decking means a commercially manufactured, structural grade, cold rolled metal panel formed into a series of parallel ribs; for this subpart, this includes metal floor and roof decks, standing seam metal roofs, other metal roofsystems and other products such as bar gratings, checker plate, expanded metal panels, and similar products. After installation and proper fastening, these decking materials serve a combination of functions including, but not limited to: a structural element designed in combination with the structure to resist, distribute and transfer loads, stiffen the structure and provide a diaphragm action; a walking/working surface; a form for concrete slabs; a support for roofing systems; and a finished floor or roof.
Sample 1Sample 2Sample 3
Metal decking. Metal decking shall comply with SDI "Design Manual for Floor Decks and Roof Decks."
Sample 1

Examples of Metal decking in a sentence

  • Metal decking bundles shall be landed on framing members so that enough support is provided to allow the bundles to be unbanded without dislodging the bundles from the supports.

  • Metal decking must be laid tightly and immediately secured upon placement to prevent accidental movement or displacement.

  • Metal decking shall be laid tightly and secured upon placement to prevent accidental movement or displacement.

  • This should be contrasted to provisioning of an end-to-end service by a vertically integrated entity.

  • Metal decking holes and open- ings shall not be cut until immediately prior to being permanently filled with the equipment or structure needed or intended to fulfill its specific use and which meets the strength requirements of paragraph (e)(3) of this section, or shall be immediately covered.(3) Covering roof and floor openings.

  • Metal decking bundles must be landed on framing members so that enough support is provided to allow the bun- dles to be unbanded without dislodging the bundles from the supports.

  • Metal decking shall be laid tightly and immediately secured upon placement to prevent accidental movement or displacement.

  • Metal decking at roof and floor holes and openings must be installed as fol- lows:(i) Framed metal deck openings must have structural members turned down to allow continuous deck installation except where not allowed by structural design constraints or constructibility.(ii) Roof and floor holes and openings must be decked over.

  • Metal decking holes and openings shall not be cut until immediately prior to being permanently filled with the equipment or structure needed or intended to fulfill its specific use and that meets the strength requirements of Section 24, or shall be immediately covered or guarded.

  • Metal decking where used in lieu of wood planking shall be of equivalent strength and shall be laid tightly and secured to prevent movement.

Related to Metal decking

  • Freeboard means a factor of safety usually expressed in feet above a flood level for purposes of floodplain management. "Freeboard" tends to compensate for the many unknown factors that could contribute to flood heights greater than the height calculated for a selected size flood and floodway conditions, such as wave action, blockage of bridge or culvert openings, and the hydrological effect of urbanization of the watershed.

  • Carpet and upholstery cleaner means a cleaning product designed for the purpose of eliminating dirt and stains on rugs, carpeting, and the interior of motor vehicles and/or on household furniture or objects upholstered or covered with fabrics such as wool, cotton, nylon or other synthetic fabrics. “Carpet and Upholstery Cleaner” includes, but is not limited to, products that make fabric protectant claims. “Carpet and Upholstery Cleaner” does not include “General Purpose Cleaners”, “Spot Removers”, vinyl or leather cleaners, dry cleaning fluids, or products designed exclusively for use at industrial facilities engaged in furniture or carpet manufacturing.

  • Mounting adhesive means an aerosol adhesive designed to permanently mount photographs, artwork, and any other drawn or printed media to a backing (paper, board, cloth, etc.) without causing discoloration to the artwork.

  • Single Phase Aerosol Air Freshener means an aerosol air freshener with the liquid contents in a single homogeneous phase and which does not require that the product container be shaken before use.

  • Tree means any object of natural growth.

  • townsite in relation to the townsite to be established near the harbour means a townsite (whether or not constituted and defined under section 10 of the Land Act) primarily to facilitate the Company’s operations in and near the harbour and for employees of the Company and in relation to the mining areas means such a townsite or townsites or any other townsite or townsites which is or are established by the Company for the purposes of its operations and employees on or near the mining areas in lieu of a townsite constituted and defined under section 10 of the Land Act;