Plantwide applicability limitation (PAL means an emission limitation expressed in tons per year, for a pollutant at a major stationary source, that is enforceable as a practical matter and established source-wide in accordance with Chapter 19, section 011.
Positive beam limitation means the automatic or semi-automatic adjustment of an x-ray beam to the size of the selected image receptor, whereby exposures cannot be made without such adjustment.
Deduction Limitation means the following described limitation on a benefit that may otherwise be distributable pursuant to the provisions of this Plan. Except as otherwise provided, this limitation shall be applied to all distributions that are “subject to the Deduction Limitation” under this Plan. If an Employer determines in good faith prior to a Change in Control that there is a reasonable likelihood that any compensation paid to a Participant for a taxable year of the Employer would not be deductible by the Employer solely by reason of the limitation under Code Section 162(m), then to the extent deemed necessary by the Employer to ensure that the entire amount of any distribution to the Participant pursuant to this Plan prior to the Change in Control is deductible, the Employer may defer all or any portion of a distribution under this Plan. Any amounts deferred pursuant to this limitation shall continue to be credited/debited with additional amounts in accordance with Section 3.8, even if such amount is being paid out in installments. The amounts so deferred and amounts credited thereon shall be distributed to the Participant or the Participant’s Beneficiary (in the event of the Participant’s death) at the earliest possible date, as determined by the Employer in good faith, on which the deductibility of compensation paid or payable to the Participant for the taxable year of the Employer during which the distribution is made will not be limited by Section 162(m). Notwithstanding the foregoing, the Committee shall interpret this Section in a manner that is consistent with Code Section 409A and the regulations thereunder, including without limitation guidance issued in connection with that Section.
Bag limit means the maximum number of game animals, game
Facility Limit means, $175,000,000, as reduced or increased from time to time pursuant to the terms hereof. References to the unused portion of the Facility Limit shall mean, at any time of determination, an amount equal to (x) the Facility Limit at such time, minus (y) the Aggregate Capital at such time.
Country Limitation Schedule means the schedule published from time to time by Ex-Im Bank setting forth on a country by country basis whether and under what conditions Ex-Im Bank will provide coverage for the financing of export transactions to countries listed therein.
Acid rain emissions limitation means, as defined in 40 CFR 72.2*, a limitation on emissions of sulfur dioxide or nitrogen oxides under the acid rain program under Title IV of the Clean Air Act (CAA).
Defined Contribution Dollar Limitation means, for any Limitation Year, $46,000, as adjusted for increases in the cost-of-living under Code section 415(d). If a short Limitation Year is created because of a Plan amendment changing the Limitation Year to a different 12-consecutive month period, the Defined Contribution Dollar Limitation for the short Limitation Year will not exceed the amount determined in the preceding sentence multiplied by a fraction, the numerator of which is the number of months in the short Limitation Year and the denominator of which is 12.
Maximum Generation Emergency Alert means an alert issued by the Office of the Interconnection to notify PJM Members, Transmission Owners, resource owners and operators, customers, and regulators that a Maximum Generation Emergency may be declared, for any Operating Day in either, as applicable, the Day-ahead Energy Market or the Real-time Energy Market, for all or any part of such Operating Day.
Concentration Limitations Limitations satisfied on each Measurement Date on or after the Effective Date and during the Reinvestment Period if, in the aggregate, the Collateral Obligations owned (or in relation to a proposed purchase of a Collateral Obligation, owned and proposed to be owned) by the Issuer comply with all of the requirements set forth below (or in relation to a proposed purchase after the Effective Date, if any such requirement is not satisfied, the level of compliance with such requirement is maintained or improved after giving effect to the purchase), calculated in each case as required by Section 1.3 herein:
Capital Account Limitation has the meaning provided in Section 4.5(b) hereof.
Emission limitation means a requirement established by the Board, the director or the Administrator, EPA, which limits the quantity, rate or concentration of emission of air pollutants on a continuous emission reduction including any requirement relating to the operation or maintenance of a source to assure continuous emission reduction (Section 302(k)).
Extension limitation means (a) the lesser of 5% or the
Effluent limitation means any restriction imposed by the Director on quantities, discharge rates, and concentrations of pollutants that are discharged from point sources into waters of the United States, the waters of the contiguous zone, or the ocean.
AND LIABILITY LIMITS State Street shall assume no responsibility for lost interest with respect to the refundable amount of any unauthorized payment order, unless State Street is notified of the unauthorized payment order within thirty (30) days of notification by State Street of the acceptance of such payment order. In no event shall State Street be liable for special, indirect or consequential damages, even if advised of the possibility of such damages and even for failure to execute a payment order.
Annual Additions means the sum credited to a Participant's Accounts for any Limitation Year of (a) "employer" contributions, (b) Employee contributions (except as provided below), (c) Forfeitures, (d) amounts allocated to an individual medical benefit account, as defined in Code §415(l)(2), which is part of a pension or annuity plan maintained by the "employer," (e) amounts derived from contributions paid or accrued which are attributable to post-retirement medical benefits allocated to the separate account of a key employee (as defined in Code §419A(d)(3)) under a welfare benefit fund (as defined in Code §419(e)) maintained by the "employer" and (f) allocations under a simplified employee pension. Except, however, the Compensation percentage limitation referred to in paragraph (e)(5)(ii) below shall not apply to: (1) any contribution for medical benefits (within the meaning of Code §419A(f)(2)) after separation from service which is otherwise treated as an "annual addition," or (2) any amount otherwise treated as an "annual addition" under Code §415(l)(1).
Access Compensation is the compensation paid by one Party to the other Party for the origination/termination of intraLATA toll calls to/from its End User. Access compensation is in accordance with the LEC’s tariffed access rates.
Order limits means the limits shown on the works plans within which the authorised project may be carried out;
Maximum Potential Additional Dividend Liability, as of any Valuation Date, means the aggregate amount of Additional Dividends that would be due if the Corporation were to make Retroactive Taxable Allocations, with respect to any fiscal year, estimated based upon dividends paid and the amount of undistributed realized net capital gains and other taxable income earned by the Corporation, as of the end of the calendar month immediately preceding such Valuation Date and assuming such Additional Dividends are fully taxable.
General Wage Increase means a general wage increase resulting from the formula set out in this LOA and applied as a percentage increase to all wage rates in the collective agreement on the first pay day after the commencement of the eleventh (11th) month in a collective agreement year;
Enforceability Limitations means limitations on enforcement and other remedies by or arising under or in connection with applicable bankruptcy, insolvency, fraudulent transfer, reorganization, moratorium and other similar Applicable Laws affecting creditors’ rights generally or general principles of equity.
Aggregate Limit shall have the meaning assigned to such term in Section 1.1 hereof.
Liability Cap has the meaning ascribed to it in paragraph 1 of Schedule 9;
Exceptions and Limitations means fair use, fair dealing, and/or any other exception or limitation to Copyright and Similar Rights that applies to Your use of the Licensed Material.
Maximum allowable residential density means the density allowed under the zoning ordinance and land use element of the general plan, or if a range of density is permitted, means the maximum allowable density for the specific zoning range and land use element of the general plan applicable to the project. Where the density allowed under the zoning ordinance is inconsistent with the density allowed under the land use element of the general plan, the general plan density shall prevail.
Maximum Limit means that number of issued Shares representing 10% of the total number of issued Shares as at the date of the passing of this Resolution (excluding any Shares which are held as treasury shares as at that date); and