Nonskid coating definition

Nonskid coating means any coating applied to the horizontal surfaces of a marine vessel for the specific purpose of providing slip resistance for personnel, vehicles, or aircraft.
Sample 1Sample 2Sample 3

Examples of Nonskid coating in a sentence

  • Non-skid coating is not a covered option under the Versifloat™ warranty.Other Limitations or Exclusions1.

  • Non-skid coating – the entire top section of the packer/roller to be coated with 0.080 in.

  • Non-skid coating shall be by Tuffcoat® Marine or approved equivalent.

  • The Non-skid coating for flight deck, helo decks and hangar decks when applied by rolling shows a pattern of peaks and valleys.

  • Non-skid coating on all walking surfaces, gunwales, and recessed bow areas.

  • Approved Non-skid coating shall be applied to a minimum dry coating thickness of 12 mils, and shall be top coated with clear sealer PRO-LINE 4800/4801 PROTHANE H.S. as manufactured by Sherwin-Williams, or approved equal, to a dry film thickness (DFT) of 2-3 mils.

Related to Nonskid coating

  • Coating means a material applied onto or impregnated into a substrate for protective, decorative, or functional purposes. Such materials include, but are not limited to, paints, varnishes, sealers, and stains.

  • Nuclear coating means any protective coating used to seal porous surfaces such as steel (or concrete) that otherwise would be subject to intrusion by radioactive materials. These coatings must be resistant to long-term (service life) cumulative radiation exposure (ASTM D4082-89), relatively easy to decontaminate (ASTM D4256-89(1994)e1), and resistant to various chemicals to which the coatings are likely to be exposed (ASTM D3912-80). [For nuclear coatings, see the general protective requirements outlined by the United States nuclear regulatory commission in a report entitled "Regulatory Guide 1.54 - Service Level I, II and III Protective Coatings Applied to Nuclear Plants"

  • Floor coating means an opaque coating that is labeled and designed for application to flooring, including but not limited to, decks, porches, steps, and other horizontal surfaces which may be subject to foot traffic.

  • Roll coating means the application of a coating material to a substrate by means of hard rubber or steel rolls.

  • Clear coating means a transparent coating designed to provide the final gloss and resistance properties of the coating system;

  • Antenna coating means a coating labeled and formulated exclusively for application to equipment and associated structural appurtenances that are used to receive or transmit electromagnetic signals.

  • Touch-up coating means a coating used to cover minor coating imperfections appearing after the main coating operation.

  • Pretreatment coating means a coating which contains no more than 12% solids by weight, and at least 0.5% acid by weight, is used to provide surface etching, and is applied directly to metal surfaces to provide corrosion resistance, adhesion, and ease of stripping.

  • Metallic coating means a coating which contains more than five grams of metal particles per liter of coating, as applied. Metal particles are pieces of a pure elemental metal or a combination of elemental metals.

  • Repair coating means a coating used to re-coat portions of a previously coated product which has sustained mechanical damage to the coating following normal coating operations.

  • Dip coating means the application of a coating material to a substrate by dipping the part into a tank of the coating material.

  • Specialty coating means a coating that, even though the coating meets the definition of a primer, topcoat, or self-priming topcoat, has additional performance criteria beyond those of primers, topcoats, and self-priming topcoats for specific applications. These performance criteria may include, but are not limited to, temperature or fire resistance, substrate compatibility, antireflection, temporary protection or marking, sealing, adhesively joining substrates, or enhanced corrosion protection. A listing of specialty coatings is found in paragraph (D)(1)(b) of rule 3745-21-19 of the Administrative Code.

  • Oxides of nitrogen means the sum of the volume mixing ratio (ppbv) of nitrogen monoxide (nitric oxide) and nitrogen dioxide expressed in units of mass concentration of nitrogen dioxide (μg/m3);

  • Topcoat means a coating that is applied over a primer on an aerospace vehicle or component for appearance, identification, camouflage, or protection. Topcoats that are defined as specialty coatings are not included under this definition.

  • Air dried coating means a coating that is dried by the use of air or forced warm air at temperatures up to 1940F (900C).

  • Fragrance means a substance or complex mixture of aroma chemicals, natural essential oils, and other functional components with a combined vapor pressure not in excess of 2 mm of Hg at 20oC, the sole purpose of which is to impart an odor or scent, or to counteract a malodor.

  • meat means the edible part of clean, sound striated muscle of cattle, swine, sheep, deer and other cervids, goat, turkey, duck, ratite, or chicken slaughtered in compliance with all applicable laws, with or without the accompanying and overlying fat, and sinew, nerve, gland, and blood vessels which normally accompany the muscle tissues and which are not separated from it in the process of dressing. Meat does not include specified risk materials.