Normal pressure definition

Normal pressure means a formation pore pressure, proportional to depth, which is roughly equal to the hydrostatic pressure gradient of a column of salt water (.465 psi/ft).
Sample 1Sample 2Sample 3
Normal pressure means a formation pore pressure, proportional to depth, which is roughly equal to the hydrostatic pressure gradient of a column of salt water (.465 psi/ft). "Off-site reserve pit" means a pit located off-site which is used for the handling,
Sample 1Sample 2Sample 3
Normal pressure is a pressure for the Bacton Interconnection Point, requested by IUK, which is above 45 xxxx but not exceeding 55 xxxx.
Sample 1Sample 2Sample 3

Examples of Normal pressure in a sentence

  • Normal pressure hydrocephalus: new concepts on etiology and diagnosis.

  • Because documentation is most valuable if contemporaneous with the event (because it creates the presumption it contains true representation of what actually occurred), employers should document the incident the same day if possible.• Avoid retroactive documentation whenever possible.

  • Normal pressure hydrocephalus: vascular white matter changes on MR images must not exclude patients from shunt surgery.

  • Normal pressure was applied on the top surface of the soil by a uniformly distributed load.

  • There are many types of dementia, including Alzheimer’s disease, Vascular dementia, Lewy body dementia, Parkinson’s disease, Frontotemporal dementia, Huntington’s disease, Creutzfeldt-Jakob disease, Normal pressure hydrocephalus, and Wernicke-Korsakoff syndrome (Dementia.org, 2022).

  • Normal pressure hydrocephalus: developments in determining surgical prognosis.

  • Normal pressure in the blue system is 3000 psi and the pressure in the alternate system with antiskid on is 2450 psi.

  • Normal pressure hydrocephalus and the predictive value of presurgical tests.

  • Normal pressure hydrocephalus (NPH): Ischaemia, CSF stagnation or both.

  • Normal pressure hydrocephalus: long- term outcome after shunt surgery.

Related to Normal pressure

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.

  • Working pressure means the settled pressure of a compressed gas at a reference temperature of 15 °C in a full pressure receptacle;

  • Reid vapor pressure means the vapor pressure of crude oil or other volatile petroleum products at 100 degrees Fahrenheit as determined by the latest edition of ASTM D6377 (RVPE): Standard Test Method for Determination of Vapor Pressure of Crude Oil.

  • Pressure means relative pressure versus atmospheric pressure, unless otherwise stated.

  • True vapor pressure means the equilibrium partial pressure exerted by a petroleum liquid as determined in accordance with methods described in American Petroleum Institute (API) Bulletin 2517, Evaporation Loss from External Floating Roof Tanks, 1980. The API procedure may not be applicable to some high viscosity or high pour crudes. Available estimates of true vapor pressure may be used in special cases such as these.

  • Vapor pressure as herein used means Vapor Pressure at 100° Fahrenheit as determined by ASTM Method D-323-90, "Standard Method of Test for Vapor Pressure of Petroleum Products (Reid Method)."

  • design pressure means the maximum pressure that a pressure vessel or plant is designed to withstand safety when operating normally;

  • Normal Pregnancy or “Childbirth” means a pregnancy or childbirth that is free of complications or problems.

  • Pressure vessel means a vessel that may be used for containing, storing, distributing, transferring, distilling, processing or otherwise handling any gas, vapour or liquid under pressure greater than the atmospheric pressure and includes any pipeline fitting or other equipment attached thereto or used in connection therewith; and

  • Load means energy consumed by Customers together with allocated losses and unaccounted for energy;

  • tons means the gross tonnage calculated in accordance with the tonnage measurement regulations contained in Annex I of the International Convention on Tonnage Measurement of Ships, 1969; the word “tonnage” shall be construed accordingly.

  • Electrical work Means any labor or material used in installing, altering, maintaining, or extending an electrical wiring system and the appurtenances, apparatus, or equipment used in connection with the use of electrical energy in, on, outside, or attached to a building, residence, structure, property, or premises. The term includes service entrance conductors as defined by the National Electrical Code.

  • Density means the permitted number of dwelling units per

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Cubic foot of gas means the amount of gas required to fill a cubic foot of space when the gas is at an absolute pressure of fourteen and seventy-three hundredths (14.73) pounds per square inch at a temperature of sixty (60) degrees Fahrenheit.

  • Production Area means that part of the animal feeding operation that includes the animal confinement area, the manure storage area, the raw materials storage area, and the waste containment areas. The animal confinement area includes, but is not limited to, open lots, housed lots, feedlots, confinement houses, stall barns, free stall barns, milkrooms, milking centers, egg washing or egg processing areas, areas used for the storage and disposal/treatment of mortalities, cowyards, barnyards, medication pens, walkers, animal walkways, and stables. The manure storage area includes, but is not limited to, lagoons, runoff ponds, storage sheds, stockpiles, under-house or pit storages, liquid impoundments, static piles, and composting piles. The raw materials storage area includes, but is not limited to, feed silos, and silage bunkers. The waste containment area includes, but is not limited to, settling basins and areas within berms and diversions which separate uncontaminated stormwater.

  • Normal Working Hours means between the hours of 7:00 AM to 5:00 PM, Monday through Friday, inclusive. Saturdays, Sundays, and County holidays are excluded.

  • Normal Minimum Generation means the lowest output level of a generating resource under normal operating conditions.

  • Normal weekly hours of work means the established standard work times and number of hours in the workweek for the position or, if standard work times and number of hours have not been established for the position, the work times and average number of hours per week actually worked by the employee in that position over the most recent 3 months before the employer files the application for designation as a participating employer.

  • Working voltage means the highest value of an electrical circuit voltage root-mean-square (rms), specified by the manufacturer, which may occur between any conductive parts in open circuit conditions or under normal operating conditions. If the electrical circuit is divided by galvanic isolation, the working voltage is defined for each divided circuit, respectively.

  • voltage ride through as used herein shall mean the ability of a Small Generating Facility to stay connected to and synchronized with the system or equipment of the Transmission Owner and any Affected Systems during system disturbances within a range of under-voltage and over-voltage conditions, in accordance with Good Utility Practice and consistent with any standards and guidelines that are applied to other generating facilities in the Balancing Authority Area on a comparable basis.

  • Bulk gasoline plant means a gasoline storage and distribution facility with an average daily throughput of 20,000 gallons (76,000 liters) of gasoline or less on a 30-day rolling average.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Low water pressure means water pressure below the regulatory reference level which is the minimum pressure when demand on the system is not abnormal.

  • Output means the exposure rate, dose rate, or a quantity related in a known manner to these rates from a brachytherapy source or a teletherapy, remote afterloader, or gamma stereotactic radiosurgery unit for a specified set of exposure conditions.

  • Electrical Distance means, for a Generation Capacity Resource geographically located outside the metered boundaries of the PJM Region, the measure of distance, based on impedance and in accordance with the PJM Manuals, from the Generation Capacity Resource to the PJM Region.