Operating Power Factor definition

Operating Power Factor. Nameplate Rating in kW: Fault Current Contribution of Generator: Amps Inverter Manufacturer, Model Name & Number (if used): (A copy of Inverter Nameplate and Manufacturer’s Specification Sheet must also be submitted) Operating Power Factor: Rating in kW: Number of Starts Per Day: Maximum Starting kVA: UF Trip Setting: UF Time Delay (Secs): Generator Grounding Method: Effectively Grounded Resonant Grounded Low-Inductance Grounded High-Resistance Grounded Low-Resistance Grounded Ungrounded Generator Characteristic Data (for rotating machines): (Not needed if Generator Nameplate and Manufacturer’s Specification Sheet are provided) Direct Axis Synchronous Negative Sequence Reactance, Xd: P.U. Reactance: P.U. Direct Axis Transient Zero Sequence Reactance, X’d: P.U. Reactance: P.U. Direct Axis Subtransient Reactance, X”d: P.U. KVA Base: Inertia Constant, H: P.U. Excitation Response Ratio: Direct Axis Open-Circuit Transient Time Constant, T’do: Seconds Direct Axis Open-Circuit Subtransient Time Constant, T”do: Seconds Section 4. Interconnecting Equipment Technical Data (to the extent owned by Seller) Will an interposing transformer be used between the generator and the point of interconnection? Yes No Transformer Data:
Sample 1Sample 2
Operating Power Factor. Nameplate Rating in kW: Fault Current Contribution of Generator: Amps Inverter Manufacturer, Model Name & Number (if used): (A copy of Inverter Nameplate and Manufacturer’s Specification Sheet must also be submitted)
Sample 1Sample 2
Operating Power Factor. Rating in kW: Number of Starts Per Day: Maximum Starting kVA: UF Trip Setting: UF Time Delay (Secs): Generator Grounding Method: Effectively Grounded Resonant Grounded Low-Inductance Grounded High-Resistance Grounded Low-Resistance Grounded Ungrounded Generator Characteristic Data (for rotating machines): (Not needed if Generator Nameplate and Manufacturer’s Specification Sheet are provided) Direct Axis Synchronous Negative Sequence Reactance, Xd: P.U. Reactance: P.U. Direct Axis Transient Zero Sequence Reactance, X’d: P.U. Reactance: P.U. Direct Axis Subtransient Reactance, X”d: P.U. KVA Base: Inertia Constant, H: P.U. Excitation Response Ratio: Direct Axis Open-Circuit Transient Time Constant, T’do: Seconds Direct Axis Open-Circuit Subtransient Time Constant, T”do: Seconds Section 4. Interconnecting Equipment Technical Data (to the extent owned by Seller) Will an interposing transformer be used between the generator and the point of interconnection? Yes No Transformer Data:
Sample 1

Examples of Operating Power Factor in a sentence

  • All required federal and state Income tax returns have been filed on a timely basis and all payments for such returns have been made.

  • Operating Power Factor Range: The meter shall work satisfactorily over a power factor range of zero lag To unity To zero lead.

  • Operating Power Factor of each inverter, voltage profile, branch current and power loss were obtained after processing the input data.

  • Svstem Descriotion:Type/Manufacturer aud Model#:Style:NameplatDe ata:MaximumVoltage & Frequency:kW output:Svnchronous Inverter/GeneratoDr ata(circle one) Manufacturer & Model#:Year Purchased:Serial Number:Power Rating:Location: Indoor Outdoor Location on Property: Operating Power Factor: 1D.

Related to Operating Power Factor

  • Power Factor means the ratio of usage power measured in kW to total power measured in kVA;

  • Load Factor means the percentage of aircraft seats actually occupied on a flight (RPMs divided by ASMs). “NMB” means the National Mediation Board.

  • Adjustment Factor means, with respect to a share of the Fund (or one unit of any other security for which a Fund Closing Price must be determined), 1.0, subject to adjustment in the event of certain events affecting the shares of the Fund. See “—Anti-dilution Adjustments Relating to the Fund; Alternate Calculation —Anti-dilution Adjustments” below.

  • Fit factor means a quantitative estimate of the fit of a particular respirator to a specific individual, and typically estimates the ratio of the concentration of a substance in ambient air to its concentration inside the respirator when worn.

  • Weighting factor wT for an organ or tissue (T) means the proportion of the risk of stochastic effects resulting from irradiation of that organ or tissue to the total risk of stochastic effects when the whole body is irradiated uniformly. For calculating the effective dose equivalent, the values of wT are:

  • Total Voting Power means, with respect to any Person, the total number of votes which may be cast in the election of directors of such Person at any meeting of stockholders of such Person if all securities entitled to vote in the election of directors of such Person (on a fully diluted basis, assuming the exercise, conversion or exchange of all rights, warrants, options and securities exercisable for, exchangeable for or convertible into, such voting securities) were present and voted at such meeting (other than votes that may be cast only upon the happening of a contingency).

  • Capacity Utilization Factor or “CUF” Shall have the same meaning as provided in CERC (Terms and Conditions for Tariff determination from Renewable Energy Sources) Regulations, 2009 as amended from time to time. Here, the CUF is expressed in AC terms.

  • MSCF means one thousand standard cubic feet.

  • NET INVESTMENT FACTOR The net investment factor for each subaccount is determined by dividing (1) by (2) and subtracting (3) from the result, where:

  • Operating parameter value means a minimum or maximum value established for a control device or process parameter that, if achieved by itself or in combination with one (1) or more other operating parameter values, determines that an owner or operator has complied with an applicable emission limit.

  • Combined Voting Power means the aggregate votes entitled to be cast generally in the election of the Board of Directors, or similar managing group, of a corporation or other entity by holders of then outstanding Voting Securities of such corporation or other entity.

  • Sustainability Factors means environmental, social and employee matters, respect for human rights, anti‐corruption and anti‐bribery matters.

  • Loss Factor means the scaling factor determined in accordance with clause 7 and applied by the reconciliation manager to volumes of electricity measured or estimated in respect of ICPs on the Network, in order to reflect the impact of the ICP on Losses within the Network;

  • Technique factors means the following conditions of operation:

  • Metering Point means, for meters that do not use instrument transformers, the point at which the billing meter is connected. For meters that use instrument transformers, the point at which the instrument transformers are connected.

  • INTER-CONNECTION POINT/ DELIVERY/ METERING POINT means a single point at 220kV or above, where the power from the Project(s) is injected into the identified ISTS Substation (including the dedicated transmission line connecting the Projects with the substation system) as specified in the RfS document. Metering shall be done at this interconnection point where the power is injected into. For interconnection with grid and metering, the WPDs shall abide by the relevant CERC/ SERC Regulations, Grid Code and Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006 as amended and revised from time to time.

  • Voting Power means the voting power of all securities of the Company then outstanding and generally entitled to vote for the election of directors of the Company.

  • Interest Factor means monthly compounding, discounting or annuitizing, as applicable, at a rate set forth in Exhibit A.

  • Rating Point means the V&H coordinates associated with a particular telephone number for rating purposes.

  • Leverage Factor means the leverage factor in respect of a Series of ETP Securities as specified in the relevant Final Terms.

  • Measurement Point means the emission source for which continuous emission measurement systems (CEMS) are used for emission measurement, or the cross-section of a pipeline system for which the CO2 flow is determined using continuous measurement systems;

  • Generator Forced Outage means an immediate reduction in output or capacity or removal from service, in whole or in part, of a generating unit by reason of an Emergency or threatened Emergency, unanticipated failure, or other cause beyond the control of the owner or operator of the facility, as specified in the relevant portions of the PJM Manuals. A reduction in output or removal from service of a generating unit in response to changes in market conditions shall not constitute a Generator Forced Outage.

  • Stress Factor means 2.25.

  • Class Factor As to any date of determination and any Class of Certificates (other than the Interest Only Classes and the Residual Certificates), a fraction the numerator of which is (i) the aggregate of the denominations of all Certificates of such Class plus, in the case of each Accrual Class, all interest that has accrued on the Certificates of such Class prior to such date of determination and been added to the Class Balance thereof, less (ii) the aggregate amount of all Principal Distribution Amounts, if any, allocable thereto prior to such date of determination and the denominator of which is the original Class Balance of such Class. As to any date of determination and any Interest Only Class, a fraction, the numerator of which is the percentage of the balance specified for such purpose under “Reference Sheet–Notional Classes” in the Prospectus Supplement (or, if applicable, the sum of the applicable percentages of the balances so specified) and the denominator of which is the original Class Balance thereof. Code: The Internal Revenue Code of 1986, as amended, including any successor or amendatory provisions.

  • Altitude means the vertical distance of a level, a point or an object considered as a point, measured from mean sea level (MSL);

  • Capacity factor means the ratio of the average load on a machine or equipment for the period of time considered to the capacity rating of the machine or equipment.