Discontinued Products If a product or model is discontinued by the manufacturer, Contractor may substitute a new product or model if the replacement product meets or exceeds the specifications and performance of the discontinued model and if the discount is the same or greater than the discontinued model.
Product Recalls (a) If either Party reasonably decides or is required by any government authority or court of competent jurisdiction, to initiate a product recall, withdrawal or field correction with respect to, or if there is any governmental seizure of, the Product, the Party initiating or required to initiate such action will notify the other Party promptly of the details regarding such action, including providing copies of all relevant documentation concerning such action. The Parties will assist each other in investigating any such situation and all regulatory contacts that are made and all activities concerning seizure, recall, withdrawal or field correction will be jointly coordinated by HSL and LMI.
(b) If any such recall, withdrawal, field correction or seizure occurs due solely to (i) failure of any Product produced by HSL hereunder to conform to Specifications (including, without limitation, being adulterated or misbranded) or any warranty or other requirement set forth in this Agreement, (ii) the failure of HSL to comply in all material respects with any applicable law, rule, regulation, guideline, standard, court order or decree or (iii) the negligent or intentional wrongful act or omission of HSL in connection with the production of Product hereunder, then HSL shall bear the **** of any such seizure, recall, withdrawal or field correction and shall reimburse LMI for its ****, including any purchase price payments made to HSL and related taxes to the extent related to such recalled Product. To the extent any such recall, withdrawal, field correction or seizure occurs for any reason other than that set forth in the immediately preceding sentence, then LMI shall bear the **** of any such seizure, recall, withdrawal or field correction. If both HSL and LMI contribute to the cause of a seizure, recall, withdrawal or field correction, the cost and expense thereof will be shared in proportion to each Party’s contribution to the problem. For the purposes of this Agreement, the expenses of any recall, withdrawal, field correction or seizure shall include, without limitation, the out-of-pocket expenses of notification and destruction or return of the recalled Product and all other out-of-pocket costs incurred in connection with such recall but shall not include a Party’s lost profits. HSL’s reimbursement for the costs of LMI Materials related to such recall, withdrawal or field correction is limited by Section 5.6(c).
Product Recall (a) If a recall is required by applicable Law, or if Buyer or Supplier reasonably determines that a recall is advisable because the goods may create a potential safety hazard, are not in compliance with any applicable code, standard or legal requirement, or contain a defect or non-conformance with the requirements of this Order occurring or likely to occur in multiple goods, which such defects or non-conformances are substantially similar or have substantially similar causes or effects (collectively a “Serial Defect”), the parties shall promptly communicate such facts to each other. At Buyer’s request, Supplier shall promptly develop a corrective action plan satisfactory to Buyer, which shall include all actions required to recall and/or repair the goods and any actions required by applicable Law (“Corrective Action Plan”) for Buyer’s review and approval. At Buyer’s election, Xxxxx may develop the Corrective Action Plan. In no event shall Buyer and Supplier’s failure to agree on the Corrective Action Plan delay the timely notification of a potential safety hazard, non-compliance or Serial Defect to users of the goods, cause either party to be non-compliant with applicable Law or prevent Buyer from taking reasonable actions to prevent injury or damage to persons, equipment or other property. Supplier and Buyer shall cooperate with and assist each other in any corrective actions and/or filings, if applicable.
(b) To the extent a recall is required by applicable Law, or due to a potential safety hazard, non-compliance or Serial Defect, which is caused by Supplier, Supplier shall indemnify and hold Buyer harmless from all reasonable costs and expenses incurred in connection with any recall, repair, replacement or refund program, including all costs related to: (i) investigating and/or inspecting the affected goods; (ii) notifying Buyer’s customers; (iii) repairing, or where repair of the goods is impracticable or impossible, repurchasing or replacing the recalled goods; (iv) packing and shipping the recalled goods; and (v) media notification. Each party shall consult the other before making any statements to the public or a governmental agency relating to such recall, potential safety hazard, non- compliance or Serial Defect, except where such consultation would prevent timely notification required by Law.
Prescription Drugs and Diabetic Equipment or Supplies Biological products for allergen immunotherapy and vaccinations. • Blood fractions. • Compound prescription drugs that are not made up of at least one legend drug. • Bulk powders and chemicals used in compound prescriptions that are not FDA approved, are not covered unless listed on our formulary. • Prescription drugs prescribed or dispensed outside of our dispensing guidelines. • Prescription drugs ordered or prescribed based solely on online questionnaires, telephonic interviews, surveys, emails, or any other marketing solicitation methods, whether alone or in combination. • Prescription drugs that have not proven effective according to the FDA. • Prescription drugs used for cosmetic purposes. • Prescription drugs purchased from a non-designated pharmacy, if a pharmacy has been designated for you through the Pharmacy Home Assignment program. • Experimental prescription drugs including those placed on notice of opportunity hearing status by the Federal Drug Efficacy Study Implementation (DESI). • Prescription drugs provided to you that are not dispensed by a network pharmacy or covered under your medical plan. • Prescription drugs and diabetic equipment and supplies purchased at a non-network pharmacy unless indicated as covered in the Summary of Pharmacy Benefits. • Prescription drug related medical supplies except for diabetic, regardless of the reason prescribed, the intended use, or medical necessity. Examples include, but are not limited to, alcohol pads, bandages, wraps or pill holders. • Off-label use of prescription drugs except as described in Experimental or Investigational Services in Section 3; • Prescribed weight-loss drugs. • Replacement of prescription drugs resulting from a lost, stolen, broken or destroyed prescription order or refill. • Therapeutic devices and appliances, including hypodermic needles and syringes except when used to administer insulin. • Prescription drugs, therapeutic equivalents, or any other pharmaceuticals used to treat sexual dysfunctions. • Vitamins, unless specifically listed as a covered healthcare service. • A prescription drug refill greater than the refill number authorized by your physician, more than a year from the date of the original prescription, or limited by law. • Long acting opioids and other controlled substances, nicotine replacement therapy, and specialty prescription drugs when purchased from a mail order pharmacy. • Prescription drugs and specialty prescription drugs when the required prescription drug preauthorization is not obtained. • Certain prescription drugs that have an over-the-counter (OTC) equivalent. • Prescriptions filled through an internet pharmacy that is not a verified internet pharmacy practice site certified by the National Association of Boards of Pharmacy. • Illegal drugs, including medical marijuana, which are dispensed in violation of state and/or federal law. • Services of a nurse's aide. • Services of a private duty nurse: o when the primary duties are limited to bathing, feeding, exercising, homemaking, giving oral medications or acting as companion or sitter; o after the caregiver or patient have demonstrated the ability to carry out the plan of care; o provided outside the home. Examples include at school, or in a nursing or assisted living facility; o that are duplication or overlap of services. Examples include when a person is receiving hospice care services or for the same hours of a skilled nursing home care visit; o that are for observation only; and o provided as part-time/intermittent and not continuous care. • Maintenance care when the condition has stabilized including routine ostomy care or tube feeding administration or if the anticipated need is indefinite. • Twenty-four (24) hour private duty nursing care for a person without an available caregiver in the home. • Respite care (e.g., care during a caregiver vacation) or private duty nursing so that the caregiver may attend work or school. • Abdominoplasty. • Brow ptosis surgery. • Cervicoplasty. • Chemical exfoliations, peels, abrasions, dermabrasions, or planing for acne, scarring, wrinkling, sun damage or other benign conditions. • Correction of variations in normal anatomy including augmentation mammoplasty, mastopexy, and correction of congenital breast asymmetry. • Dermabrasion. • Ear piercing or repair of a torn earlobe. • Excision of excess skin or subcutaneous tissue except for panniculectomy. • Genioplasty. • Hair transplants. • Hair removal including electrolysis epilation, unless in relation to gender reassignment services or skin grafting. • Inverted nipple surgery. • Laser treatment for acne and acne scars. • Osteoplasty - facial bone reduction. • Otoplasty. • Procedures to correct visual acuity including but not limited to cornea surgery or lens implants. • Removal of asymptomatic benign skin lesions. • Repeated cauterizations or electrofulguration methods used to remove growths on the skin. • Rhinoplasty.
Limited Product Warranty Repair or Replacement within 12 years
New Products You agree to comply with NASD Notice to Members 5-26 recommending best practices for reviewing new products.
API If the Software offers integration capabilities via an API, your use of the API may be subject to additional costs or Sage specific policies and terms and conditions (which shall prevail in relation to your use of the API). You may not access or use the API in any way that could cause damage to us or the Software, or in contravention of any applicable laws. We reserve the right in our sole discretion, to: (i) update any API from time to time; (ii) place limitations around your use of any API; and (iii) deny you access to any API in the event of misuse by you or to otherwise protect our legitimate interests.
AUDIT OF LICENSED PRODUCT USAGE Contractor shall have the right to periodically audit, no more than annually, at Contractor’s expense, use of licensed Product at any site where a copy of the Product resides provided that: (i) Contractor gives Licensee(s) at least thirty (30) days advance written notice, (ii) such audit is conducted during such party’s normal business hours, (iii) the audit is conducted by an independent auditor chosen on mutual agreement of the parties. Contractor shall recommend a minimum of three (3) auditing/accounting firms from which the Licensee will select one (1). In no case shall the Business Software Alliance (BSA), Software Publishers Association (SPA), Software and Industry Information Association (SIIA) or Federation Against Software Theft (FAST) be used directly or indirectly to conduct audits, or be recommended by Contractor; (iv) Contractor and Licensee are each entitled to designate a representative who shall be entitled to participate, and who shall mutually agree on audit format, and simultaneously review all information obtained by the audit. Such representatives also shall be entitled to copies of all reports, data or information obtained from the audit; and (v) if the audit shows that such party is not in compliance, Licensee shall be required to purchase additional licenses or capacities necessary to bring it into compliance and shall pay for the unlicensed capacity at the NYS Net Price in effect at time of audit, or if none, then at the Contractor’s U.S. Commercial list price. Once such additional licenses or capacities are purchased, Licensee shall be deemed to have been in compliance retroactively, and Licensee shall have no further liability of any kind for the unauthorized use of the software.
Preference for domestically manufactured goods The provisions of paragraphs 2.54 and 2.55 of the Guidelines and Appendix 2 thereto shall apply to goods manufactured in the territory of the Borrower.
QUALITY OF GOODS 5.1 Voip Unlimited warrants that on delivery, the Goods shall:
(a) conform in all material respects with the Goods Specification;
(b) be free from material defects in design, material and workmanship;
(c) be of satisfactory quality (within the meaning of the Sale of Goods Act 1979); and
(d) be fit for any purpose held out by Voip Unlimited.
5.2 Subject to clause 5.3, if:
(a) the Customer gives notice in writing within a reasonable time of discovery that some or all of the Goods do not comply with the warranty set out in clause 5.1;
(b) Voip Unlimited is given a reasonable opportunity of examining such Goods; and
(c) the Customer (if asked to do so by Voip Unlimited) returns such Goods to Voip Unlimited's place of business at Voip Unlimited's cost, Voip Unlimited shall, at its option, repair or replace the defective Goods, or refund the price of the defective Goods in full.
5.3 Voip Unlimited shall not be liable for the Goods' failure to comply with the warranty in clause 5.1 if:
(a) the Customer makes any further use of such Goods after giving a notice in accordance with clause 5.2;
(b) the defect arises because the Customer failed to follow Voip Unlimited's oral or written instructions as to the storage, installation, commissioning, use or maintenance of the Goods or (if there are none) good trade practice;
(c) the defect arises as a result of Voip Unlimited following any drawing, design or Goods Specification supplied by the Customer;
(d) the Customer alters or repairs such Goods without the written consent of Voip Unlimited;
(e) the defect arises as a result of fair wear and tear, wilful damage, negligence, or abnormal working conditions;
(f) the Goods differ from the Goods Specification as a result of changes made to ensure they comply with applicable statutory or regulatory standards.
5.4 Except as provided in this clause 5, Voip Unlimited shall have no liability to the Customer in respect of the Goods' failure to comply with the warranty set out in clause 5.1.
5.5 The terms of these Conditions shall apply to any repaired or replacement Goods supplied by Voip Unlimited under clause 5.2.
