Oxygen content definition

Oxygen content means the percentage by weight of oxygen contained in a gasoline oxygenate blend as determined under ASTM D4815.
Oxygen content means the percentage of oxygen by weight contained in gasoline, based upon its percentage oxygenate by volume, excluding denaturants and other non-oxygen containing components.
Oxygen content means the percentage by weight of oxygen contained in a gasoline oxygenate blend as calculated by ASTM D4815-94a D 4815.

Examples of Oxygen content in a sentence

  • The following pure gases shall be available for calibration and operation: Purified synthetic air: (purity < 1 ppm C1 equivalent, 1 ppm CO,  400 ppm CO2,  0.1 ppm NO); Oxygen content between 18 and 21 per cent by volume.

  • Oxygen content must meet a minimum of 1.5 wt% and a maximum of 4.0 wt% after blending of denatured fuel ethanol.

  • Oxygen content of the soil will affect the soil’s ability to remove additional contaminants before the treated effluent reaches groundwater.

  • Table A2/1 Evaporative emission test reference fuel for mutual recognition under the 1998 Agreement Research octane number, RON Density at 15 °C Vapour pressure Distillation: – evaporated at 70 °C – evaporated at 100 °C – evaporated at 150 °C Hydrocarbon analysis: – olefins – aromatics – benzene Oxygen content Sulphur content Lead content Ethanol MTBE Methanol Kerosene a Other method that is traceable to national or international standard may be used.

  • Necessary controls for Oxygen content of condensate leaving the condenser hot well will be provided.

  • Sample will be analyzed for geometrical accuracies, surface roughness and Oxygen content in the build.

  • Flue gas CO2 sulfur dioxide (SO2) and Oxygen content will be measured with a properly calibrated, transportable, CEM system (Test CEMS) or with instruments specialized for the specific constituents.

  • Pursuant to UNC TPD I2.2 this Modification, if approved, will enable a change to the South Hook LNG NEA.It should be noted that similar enabling Modifications, 0561S “Amendment to the Oxygen Limit within the BBL/NTS Interconnection Agreement” and 0581S “Amending the Oxygen content limit specified in the Network Entry Agreements at Grain LNG” were approved by the UNC Modification Panel in November 2015 and July 2016 respectively and were both implemented under self-governance arrangements.

  • EPA Methods 3, 3A, or 20 shall be used for Oxygen content of the exhaust gas.

  • Oxygen content shall be determined in accordance with R307-301-4.


More Definitions of Oxygen content

Oxygen content means the percentage by weight of oxygen contained in a gasoline oxygenate blend as deter- mined under ASTM D4815.
Oxygen content means the percentage by weight of oxygen contained in a gasoline oxygenate blend as calculated
Oxygen content means the percentage by weight of oxygen contained in a
Oxygen content means the percentage of oxygen by weight contained in a gasoline blend, based upon its percentage oxygenate by volume, excluding denaturants and other non-oxygen-containing components and adjusted to 60 degrees Fahrenheit;

Related to Oxygen content

  • VOC content means the total weight of VOC in a product expressed as a percentage of the product weight (exclusive of the container or packaging), as determined pursuant to sections 94515(a) and (b).

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Halogen means one of the chemical elements chlorine, bromine or iodine.

  • Membrane filtration means a pressure or vacuum driven separation process in which particulate matter larger than one micrometer is rejected by an engineered barrier, primarily through a size exclusion mechanism, and which has a measurable removal efficiency of a target organism that can be verified through the application of a direct integrity test. This definition includes the common membrane technologies of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis.

  • Beam axis means a line from the source through the centers of the x-ray fields.

  • User Content means any comments, remarks, data, feedback, content, text, photographs, images, video, music, or other content or information that you or any Site Visitor or User post to any part of the Site or provide to Upwork, including such content or information that is posted as a result of questions.

  • Imported content means that portion of the bidding price represented by the cost of components, parts or materials which have been or are still to be imported (whether by the supplier or his subcontractors) and which costs are inclusive of the costs abroad, plus freight and other direct importation costs such as landing costs, dock dues, import duty, sales duty or other similar tax or duty at the South African place of entry as well as transportation and handling charges to the factory in the Republic where the supplies covered by the bid will be manufactured.

  • Recycled content means the percentage of a product composed of recovered material, or post- consumer recovered material, or both.

  • Low-solids coating means a coating containing 0.12 kilogram or less of solids per liter (one pound or less of solids per gallon) of coating material.

  • Stereotactic radiosurgery means the use of external radiation in conjunction with a stereotactic guidance device to very precisely deliver a therapeutic dose to a tissue volume.

  • High voltage bus means the electrical circuit, including the coupling system for charging the REESS that operates on a high voltage.

  • high voltage means the classification of an electric component or circuit, if its working voltage is > 60 V and ≤ 1500 V DC or > 30 V and ≤ 1000 V AC root mean square (rms).

  • Automotive Wax, Polish, Sealant or Glaze means a product designed to seal out moisture, increase gloss, or otherwise enhance a motor vehicle’s painted surfaces. “Automotive Wax, Polish, Sealant or Glaze” includes, but is not limited to, products designed for use in autobody repair shops and “drive-through” car washes, as well as products designed for the general public. “Automotive Wax, Polish, Sealant or Glaze” does not include “Automotive Rubbing or Polishing Compounds”, automotive wash and wax products, surfactant-containing car wash products, and products designed for use on unpainted surfaces such as bare metal, chrome, glass, or plastic.

  • Brachytherapy means a method of radiation therapy in which sealed sources are utilized to deliver a radiation dose at a distance of up to a few centimeters, by surface, intracavitary, or interstitial application.

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • Tetrahydrocannabinol means the natural or synthetic equivalents of the substances contained in the plant, or in the resinous extractives of, Cannabis sativa, or any synthetic substances, compounds, salts, or derivatives of the plant or chemicals and their isomers with similar chemical structure and pharmacological activity.

  • Pump spray means a packaging system in which the product ingredients within the container are not under pressure and in which the product is expelled only while a pumping action is applied to a button, trigger or other actuator.

  • Web spray adhesive means any aerosol adhesive that is not a mist spray or special purpose spray adhesive.

  • Filter means material placed in the useful beam to preferentially absorb selected radiations.

  • Biochemical Oxygen Demand (BOD) shall mean the quantity of oxygen utilized in the biochemical oxidation of organic matter under standard laboratory procedure in five (5) days at 20 degrees Centigrade, expressed in milligrams per liter.

  • Polyolefin adhesive means an aerosol adhesive designed to bond polyolefins to substrates.

  • Customer Content means all software, data (including personal data), information, text, images, audio, video, photographs, non-AVEVA or third-party applications, and other content and material, in any format, provided by Customer, any of Customer’s users, or on behalf of Customer that is stored in, or run on or through, the Products and Support Services.

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.