PCB Remediation Waste definition

PCB Remediation Waste means PCB remediation waste as defined in 40 CFR 761.3.
Sample 1Sample 2Sample 3
PCB Remediation Waste means soil, rags, and other debris generated as a result of any PCB spill cleanup, including, but not limited to:
Sample 1Sample 2
PCB Remediation Waste means wastes containing PCBs as a result of a spill, release, or other unauthorized disposal, at the following concentrations: Materials disposed of prior to April 18, 1978, that are currently at concentrations≥ 50 ppm, regardless of the concentration of the original spill; materials which are currently at any volume or concentration where the original source was ≥ 500 ppm PCBs beginning on April 18, 1978 or ≥ 50 ppm beginning on July 2, 1979; and materials which are currently at any concentration if the PCBs are spilled or released from a source not authorized for use under this part. PCB remediation waste means soil, rags, and other debris generated as a result of any PCB spill cleanup, including, but not limited to:
Sample 1Sample 2

Examples of PCB Remediation Waste in a sentence

  • PCB Remediation Waste remaining at the Site that is not disposed of under these Approvals is not covered by these Approvals, but remains subject to any applicable cleanup and disposal requirements of 40 CFR part 761 subpart D.

  • Secondary sources or materials that contain PCBs as a result of a release from primary sources are subject to the PCB Remediation Waste regulations.

  • Under 40 CFR 761.3, a building material that is identified as an unauthorized use of PCBs and designated for disposal must be properly classified as either a PCB Bulk Product Waste or a PCB Remediation Waste.

  • This regulatory information is governed by Code of Federal Regulation (CFR) Title 40, Protection of Environment; Chapter I, Environmental Protection Agency (EPA); Subchapter R, Toxic Substance Control Act (TSCA); Part 761, Polychlorinated Biphenyl (PCBs) Manufacturing, Processing, Distribution in Commerce, and Use Prohibitions; Subpart D, Storage and Disposal; Section 761.61, PCB Remediation Waste; dated July 1, 2011.

  • USWAG Members (listed in Appendix II) may dispose of non-liquid PCB Remediation Wastes with as-found PCB concentrations of less than (“<”) 50 parts per million (ppm)1 in non-TSCA approved landfill facilities, which includes MSWLFs, as described in Condition 9, provided the USWAG Member satisfies the conditions of these Approvals, and the PCB Remediation Waste is generated at a secure utility asset that is owned or operated by the USWAG Member.

  • USWAG Members (listed in Appendix II) are authorized to dispose of PCB Remediation Waste with an as-found concentration of < 50 ppm PCBs in disposal facilities or units enumerated in Condition 9.

  • Prior to commencing operations under these Approvals, the USWAG Member shall obtain any other necessary federal, state or local permits or approvals associated with the cleanup, removal, storage, transportation, and disposal of the PCB Remediation Waste subject to these approvals.

  • These Approvals only apply to PCB Remediation Waste generated within secure electric cooperative assets that are owned or operated by a NRECA Member listed in Appendix II.

  • EPA regulations allow PCB Remediation Waste to be managed according to a method that is termed self-implementing onsite clean-up and disposal.

  • The USWAG Member shall ensure equipment used for conducting waste sampling or waste handling (e.g., personal protective equipment, shovels, brushes, rags and wipes) which is contaminated, or has been in contact with, PCB Remediation Waste disposed of under these Approvals is managed according to the requirements of 40 CFR 761.61(a)(5)(v) (including disposal in a MSWLF) or 40 CFR 761.79.

Related to PCB Remediation Waste

  • Remediation waste means all solid and hazardous wastes, and all media (including groundwater, surface water, soils, and sediments) and debris that are managed for implementing cleanup.

  • Licensed site remediation professional means an individual

  • Remediation means any response, remedial, removal, or corrective action, any activity to cleanup, detoxify, decontaminate, contain or otherwise remediate any Hazardous Materials, Regulated Substances or USTs, any actions to prevent, cure or mitigate any Release, any action to comply with any Environmental Laws or with any permits issued pursuant thereto, any inspection, investigation, study, monitoring, assessment, audit, sampling and testing, laboratory or other analysis, or any evaluation relating to any Hazardous Materials, Regulated Substances or USTs.

  • Remediation Plan means a report identifying:

  • Mold remediation in accordance with professional standards means mold remediation of that

  • Decontamination means a procedure whereby health measures are taken to eliminate an infectious or toxic agent or matter on a human or animal body surface, in or on a product prepared for consumption or on other inanimate objects, including conveyances, that may constitute a public health risk;

  • Hazardous Waste means the substances regulated as such pursuant to any Environmental Law.

  • Construction and demolition waste means the waste building materials, packaging, and rubble resulting from construction, remodeling, repair, and demolition operations on pavements, houses, commercial buildings and other structures.

  • Construction waste means solid waste which is produced or generated during construction, remodeling, or repair of pavements, houses, commercial buildings, and other structures. Construction wastes include, but are not limited to lumber, wire, sheetrock, broken brick, shingles, glass, pipes, concrete, paving materials, and metal and plastics if the metal or plastics are a part of the materials of construction or empty containers for such materials. Paints, coatings, solvents, asbestos, any liquid, compressed gases or semi-liquids and garbage are not construction wastes.

  • e-waste means electrical and electronic equipment, whole or in part discarded as waste by the consumer or bulk consumer as well as rejects from manufacturing, refurbishment and repair processes;

  • Environmental Contamination means the introduction or presence of Hazardous Materials at such levels, quantities or location, or of such form or character, as to constitute a violation of federal, state or local laws or regulations, and present a material risk under federal, state or local laws and regulations that the Premises will not be available or usable for the purposes contemplated by this Agreement.

  • Household Hazardous Waste means any waste material derived from households (including single

  • Adverse Environmental Condition shall refer to (i) the existence or the continuation of the existence, of an Environmental Emission (including, without limitation, a sudden or non-sudden accidental or non-accidental Environmental Emission), of, or exposure to, any substance, chemical, material, pollutant, Contaminant, odor or audible noise or other release or emission in, into or onto the environment (including, without limitation, the air, ground, water or any surface) at, in, by, from or related to any Equipment, (ii) the environmental aspect of the transportation, storage, treatment or disposal of materials in connection with the operation of any Equipment or (iii) the violation, or alleged violation of any statutes, ordinances, orders, rules regulations, permits or licenses of, by or from any governmental authority, agency or court relating to environmental matters connected with any Equipment.

  • Remedial Action means all actions to (i) clean up, remove, treat, or in any other way address any Hazardous Material, (ii) prevent the Release of any Hazardous Material so it does not endanger or threaten to endanger public health or welfare or the indoor or outdoor environment, (iii) perform pre-remedial studies and investigations or post-remedial monitoring and care, or (iv) correct a condition of noncompliance with Environmental Laws.

  • major environmental rule means a rule the specific intent of which is to protect the environment or reduce risks to human health from environmental exposure and that may adversely affect in a material way the economy, a sector of the economy, productivity, competition, jobs, the environment, or the public health and safety of the state or a sector of the state.

  • Environmental Damage means any material injury or damage to persons, living organisms or property or any material pollution or impairment of the environment resulting from the discharge, emission, escape or migration of any substance, energy, noise or vibration;

  • Environmental, Health and Safety Liabilities means any cost, damages, expense, liability, obligation or other responsibility arising from or under any Environmental Law.

  • Hazardous Materials does not include products or materials that are commonly used in construction or industrial practice so long as they are used in accordance with the manufacturer’s instructions or Material Safety Data Sheets issued for the product or materials. (See Article 1.6.3 below.)

  • Cleanup means actions necessary to contain, collect, control, identify, analyze, clean up, treat, disperse, remove or dispose of a hazardous substance.

  • Hazardous Materials Contamination means contamination (whether now existing or hereafter occurring) of the improvements, buildings, facilities, personalty, soil, groundwater, air or other elements on or of the relevant property by Hazardous Materials, or any derivatives thereof, or on or of any other property as a result of Hazardous Materials, or any derivatives thereof, generated on, emanating from or disposed of in connection with the relevant property.

  • Environmental Safeguards means the principles and requirements set forth in Chapter V, Appendix 1, and Appendix 4 (as applicable) of the SPS;

  • Materials of Environmental Concern any gasoline or petroleum (including crude oil or any fraction thereof) or petroleum products or any hazardous or toxic substances, materials or wastes, defined or regulated as such in or under any Environmental Law, including asbestos, polychlorinated biphenyls and urea-formaldehyde insulation.

  • Environmental Conditions means any conditions of the environment, including, without limitation, the work place, the ocean, natural resources (including flora or fauna), soil, surface water, ground water, any actual or potential drinking water supply sources, substrata or the ambient air, relating to or arising out of, or caused by the use, handling, storage, treatment, recycling, generation, transportation, Release or threatened Release or other management or mismanagement of Regulated Substances resulting from the use of, or operations on, the Property.

  • Pathological waste means waste material consisting of only human or animal remains, anatomical parts, and/or tissue, the bags/containers used to collect and transport the waste material, and animal bedding (if applicable).

  • Infectious waste means a solid waste that contains or may reasonably be

  • Environmental, Health, and Safety Requirements means all federal, state, local and foreign statutes, regulations, and ordinances concerning public health and safety, worker health and safety, and pollution or protection of the environment, including without limitation all those relating to the presence, use, production, generation, handling, transportation, treatment, storage, disposal, distribution, labeling, testing, processing, discharge, release, threatened release, control, or cleanup of any hazardous materials, substances or wastes, as such requirements are enacted and in effect on or prior to the Closing Date.