Examples of Process drain in a sentence
Process drain openings (sumps, etc.) are normally fitted with an emission control device such as a water seal or sealed cover.
Process drain openings (sumps, etc.) are normally fitted with an emission control device such as a water seal or sealed cover.
Process Gas means gas used for which alternate fuels, other than another gaseous fuel, are not technically feasible such as in applications requiring precise temperature controls and precise flame characteristics.
Process weight means the total weight of all materials introduced into any source operation. Solid fuels charged will be considered as part of the process weight, but liquid and gaseous fuels and combustion air will not.
Cannabis testing facility means an entity registered by
Process Wastewater means any water which, during manufacturing or processing, comes into direct contact with or results from the production or use of any raw material, intermediate product, finished product, by-product, or waste product.
Generation Interconnection Feasibility Study means a study conducted by the Transmission Provider (in coordination with the affected Transmission Owner(s)) in accordance with Tariff, Part IV, section 36.
Telecommunications Access Device means that term as defined in Section 219a of the Michigan Penal Code, 1931 PA 328, MCL 750.219a, as may be amended from time to time. As of January 2012, "Telecommunication Access Device" is defined to mean any of the following:
medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV < Un 44 kV. [SANS 1019]
Anaerobic digester means a liquid manure storage area that is constructed with the intent to capture and combust gas emissions resulting from the digestion of waste by microbes in anaerobic conditions. An anaerobic digester is a LMSA and is required to comply with all requirements applicable to LMSAs. Requirements specific to anaerobic digesters will be noted when applicable.
Clean coal technology demonstration project means a project using funds appropriated under the heading “Department of Energy—Clean Coal Technology,” up to a total amount of $2,500,000,000 for commercial demonstration of clean coal technology, or similar projects funded through appropriations for the Environmental Protection Agency. The federal contribution for a qualifying project shall be at least 20 percent of the total cost of the demonstration project.
Membrane filtration means a pressure or vacuum driven separation process in which particulate matter larger than one micrometer is rejected by an engineered barrier, primarily through a size exclusion mechanism, and which has a measurable removal efficiency of a target organism that can be verified through the application of a direct integrity test. This definition includes the common membrane technologies of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis.
Biochemical Oxygen Demand (BOD) shall mean the quantity of oxygen utilized in the biochemical oxidation of organic matter under standard laboratory procedure in five (5) days at 20 degrees Centigrade, expressed in milligrams per liter.
Manufacturing Facility means buildings and structures, including machinery and equipment, the primary purpose of which is or will be the manufacture of tangible goods or materials or the processing of such goods or materials by physical or chemical change.
Fabrication means making up data or results and recording or reporting them.
Marijuana testing facility means an entity licensed to analyze and certify the safety and potency of marijuana.
Gasification means the substoichiometric oxidation or steam reformation of a substance to produce a gaseous mixture containing two or more of the following: (i) oxides of carbon; (ii) methane; and (iii) hydrogen;
Access Device means a card, plate, code, account number, per- sonal identification number, electronic serial number, mobile identi- fication number, or other telecommunications service, equipment, or instrument identifier or means of account access that alone or in conjunction with another device may be used to:
Manufacturing Process means any process for—
Drainage system means one or more artificial ditches, tile drains or similar devices which collect surface runoff or groundwater and convey it to a point of discharge.
Composting facility means a site, location, tract of land, installation, or building used for composting of solid waste in accordance with Chapter 3734. of the Revised Code and rules adopted thereunder. The composting facility includes the area of materials placement and any leachate management system structures.
Cannabis processing facility means a person that:
Manufacturing Facilities means facilities engaged in the mechanical or chemical transformation of materials or substances into new products and shall include:
Interconnection Feasibility Study means either a Generation Interconnection Feasibility Study or Transmission Interconnection Feasibility Study.
voltage means the root-mean-square value of electrical potential between two conductors.
Remanufacturing means the activity of overhauling, retrofitting, fabricating, or repairing a product or its component parts for ultimate sale at retail.
RFP Process or “Bidding Process” means the process governing the submission and evaluation of the Bids as set out in the RFP itself;
Anaerobic digestion ’ means a controlled process involving microbial decomposition of organic matter in the absence of oxygen ;