Processed bentonite definition

Processed bentonite means bentonite which has been kiln dried and processed into pellets for direct use in well sealing applications or into powder or coarse granules for use in bentonite grout for sealing.

Related to Processed bentonite

  • Septage means the liquid and solid material pumped from a septic tank, cesspool, or similar domestic sewage treatment system, or from a holding tank, when the system is cleaned or maintained.

  • Check valve or “anti-drain valve” means a valve located under a sprinkler head, or other location in the irrigation system, to hold water in the system to prevent drainage from sprinkler heads when the sprinkler is off.

  • Total tetrahydrocannabinol means the same as that term is defined in § 3.2-4112.

  • HCD means the California Department of Housing and Community Development.

  • Compressed natural gas means a mixture of hydrocarbon gases and vapors that consists primarily of methane in gaseous form that has been compressed for use as a fuel to propel a motor vehicle.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which (1) a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and (2) while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • COGSA means the Carriage of Goods by Sea Act of the United States of America approved on 16th April 1936.

  • Harvest batch means a specifically identified quantity of dried flower or trim, leaves, and other cannabis plant matter that is uniform in strain, harvested at the same time, and, if applicable, cultivated using the same pesticides and other agricultural chemicals, and harvested at the same time.

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Cord means the strands forming the fabric of the plies in the pneumatic-tyre.

  • Double check valve assembly means an assembly composed of two single, independently acting, check valves including tightly closing shutoff valves located at each end of the assembly and suitable connections for testing the water tightness of each check valve.

  • Industrial hemp means a plant of the genus Cannabis and any part of the plant, whether growing or not, containing a delta-9 tetrahydrocannabinol (THC) concentration of no more than three-tenths of one percent (0.3%) on a dry weight basis.

  • Stillbirth means an unintended fetal death occurring after a gestation period of 20 completed weeks or more or an unintended fetal death of a fetus with a weight of 350 or more grams.

  • Slavery means the status or condition of a person over whom any or all the powers attaching to the right of ownership are exercised;

  • Health professional shortage area means that term as defined in section 332(a)(1) of subpart II of part C of title III of the public health service act, chapter 373, 90 Stat. 2270, 42 U.S.C. 254e.

  • Mining Xxx 0000 means (unless the context otherwise requires) the Mining Xxx 0000 and the amendments thereto and the regulations made thereunder as in force on 31st December, 1981;

  • Anadromous fish means any species of fish which ascends rivers or streams from the sea for breeding purposes (e.g. Alewife, Salmon, Shad).

  • Slow sand filtration means a process involving passage of raw water through a bed of sand at low velocity (generally less than 0.4 meters per hour (m/h)) resulting in substantial particulate removal by physical and biological mechanisms.

  • Transportation network company driver or “driver” means an

  • TMDL means the total maximum daily load limitation of a parameter, representing the estimated assimilative capacity for a water body before other designated uses are adversely affected. Mathematically, it is the sum of wasteload allocations for point sources, load allocations for non-point and natural background sources, and a margin of safety.

  • Contactless means a payment feature that provides You with a way to pay by tapping the Card on a point–of–sale terminal reader for transactions of up to a specified limit.

  • Geothermal fluid means water in any form at temperatures greater than 120

  • Seat Belt means a properly installed:

  • COVID-19 symptoms means fever of 100.4 degrees Fahrenheit or higher, chills, cough, shortness of breath or difficulty breathing, fatigue, muscle or body aches, headache, new loss of taste or smell, sore throat, congestion or runny nose, nausea or vomiting, or diarrhea, unless a licensed health care professional determines the person’s symptoms were caused by a known condition other than COVID-19.

  • IMRO means the Irish Music Rights Organisation CLG.

  • Public safety answering point or “PSAP” means an answering location for 911 calls originating in a given area. The E911 Customer may designate a PSAP as primary or secondary, which refers to the order in which calls are directed for answering. Primary PSAPs answer calls; secondary PSAPs receive calls on a transfer basis. PSAPs are public safety agencies such as police, fire, emergency medical, etc., or a common bureau serving a group of such entities.