Recovery efficiency definition

Recovery efficiency of a water heater means the ratio of energy delivered to the water to the energy content of the fuel consumed by the water heater, as determined using the applicable test method in Section 1604(f).
Sample 1Sample 2Sample 3
Recovery efficiency means the percent of total ODS blowing agent that is recovered during the process of ODS blowing agent extraction.
Sample 1Sample 2Sample 3
Recovery efficiency means the ratio of energy delivered to the water to the energy content of the fuel consumed by the waterheater.
Sample 1

Examples of Recovery efficiency in a sentence

  • Recovery efficiency is applied to prospective resources in this table.

  • R = Recovery efficiency for the system performance check, percent.

  • Recovery efficiency of (A) PLAP and (B) CD63 proteins extracted from EVs captured by NWs and Dynabeads conjugated with either anti-PLAP or an irrelevant IgG (bound) and the corresponding supernatants (unbound).

  • Recovery efficiency is computed (η ATES ,Re c ) in a seasonal manner considering the operation of the ATES.

  • Recovery efficiency was lower for DM, probably due to the loss of dissolved inorganic and organic compounds that cannot be separated even with 0.45-µm filtration [26].

  • CH2S = Verified concentration of H2S recovery R = Recovery efficiency for the system per- formance check, percent.

  • The strength recovery efficiency in the different conditions was calculated as follows: where:𝑆𝑒= (1 − 𝑆0−𝑆𝑡) ∗ 100 [3]𝑆0𝑆𝑒 = Strength Recovery efficiency (%);𝑆0 = Strength in undamaged condition, kN; and𝑆𝑡 = Strength in damaged or healed condition, kN.

  • Recovery efficiency is the efficiency of the water heater while the burner is operating continuously, and typically ranges from about 76-80%, although a few models report higher recovery efficiencies2.

  • Recovery efficiency at Lannex again improved based on higher quality 1st Pass dump material being treated from the neighbouring Tweefontein operation since May 2019, compared to the final batch of historic 2nd Pass dump material from Lannex treated during Q3.

  • Recovery efficiency is expressed as the ratio of the quantity of the oil recovered to the total quantity of fluid (oil and water and their emulsion) collected [6, 16]: RE =Voil Vtotal fluid×100 whereRE = recovery efficiency, %Voil = volume of oil recoveredVtotal fluid = volume of total fluid recoveredDuring the tests, the skimmers were operated as appropriate to avoid deliberate underperformance.

Related to Recovery efficiency

  • Efficiency means the gas turbine manufacturer's rated heat rate at peak load in terms of heat input per unit of power output based on the lower heating value of the fuel.

  • Energy efficiency means the ratio of output of performance, service, goods or energy, to input of energy;

  • Thermal efficiency means the useful electric energy output of a

  • Energy efficiency program means a program that reduces the total amount of electricity that is

  • Salvaging means the lawful and controlled removal of reusable materials from solid waste.