Examples of Relative Density in a sentence
As envisaged in clause 6.6.3.1 of IS 4701-1982, the "Relative Density" of the compaction layer shall preferably 70% but not less than 65% when tested in accordance with IS 2720 (Part-XIV) 1983.
Low Relative Density – an area of heavy thinning where the Relative Density of the residual stand is less than 15.
The Btu value will be determined utilizing the complete actual composition of the gas according to the methods in GPA Standard 2172-96, titled "Calculation of Gross Heating Value, Relative Density and Compressibility Factor for Natural Gas Mixtures from Compositional Analysis," and corrected to the base conditions.
The Btu value will be determined utilizing the complete actual composition of the Gas according to the methods in GPA Standard 2172-96, titled "Calculation of Gross Heating Value, Relative Density and Compressibility Factor for Natural Gas Mixtures from Compositional Analysis," and corrected to the base conditions.
TABLE A RECOMMENDED DEGREE OF COMPACTION GUIDELINES Construction Application Standard Xxxxxxx (ASTM D698) Cohesive Soil Standard Xxxxxxx (ASTM D698) Cohesionless Soil *Relative Density (D4253 & D4254) Cohesionless Soil Class 1 95% 98% 70% Class 2 90% 93% 45% Class 3 85% 88% 20% Class 1 - Subgrade for building foundations, slabs-on-grade, pavements and other critical backfill areas.
The Applicants make thinning decisions based on stand and market conditions, targeting an average post-thinning Relative Density (RD) of 40, ranging from 35 to 45 for residual stand conditions.
The specified compaction is expressed as a percentage of the Maximum Relative Density (MRD), as established from the approved asphalt mix design for the project, and verified by QA testing and asphalt core correlation.
The Purchaser shall demonstrate, to the satisfaction of the CA, a working knowledge and ability to accurately measure and calculate Relative Density.
The Gross Heating Value, Specific Gravity, and Compressibility of the Gas delivered at the Receipt Points and Delivery Points shall be determined from compositional analysis as described in Section 2(d) above as outlined in Gas Processors Association Standard 2172 Calculation of Gross Heating Value, Relative Density, and Compressibility of Natural Gas Mixtures from Compositional Analysis.
Product Cut Composition wt% Relative Density 60/60°F Viscosity at 100°C (cSt) Sulphur (%wt) Gas C1-C4 x Naphtha C5‑150oC TBP x Kerosene 150-250oC TBP x z Gasoil 250-350oC TBP x z Vacuum Gasoil 350-550oC TBP x z Vacuum Residue greater than 550oC TBP x z z The product yields and product qualities for Forties Blend are obtained by averaging the yields and qualities of all Users' SCO, weighted by User Monthly SCO allocation from Paragraph 3.10 of Attachment B ‑ Part I to this Agreement.