Reverse Pickup definition

Reverse Pickup means collection of the products by BFRS from the customer’s address as specified by the User and the delivery of such products at a location mutually agreed between the Parties.
Reverse Pickup means collection of the Products by Service Provider from the Customer’s address as specified by the Merchant and the delivery of such products at a location mutually agreed between the Parties.
Reverse Pickup means collection of the products by Xxxxx’s Logistics Partner from the end customer’s address as specified by the User and the delivery of such products at a location mutually agreed between the • User shall agree that in case of a reverse pick up of orders, it shall be their responsibility to pay any additional reverse pick up charges shared by Xxxxx from time to time and visible in the account panel against the service plan selected by the • Xxxxx and Xxxxx’s logistics partners shall not be responsible for verifying the contents of the products handed over by the customer to its delivery personnel in case of reverse pick-up service without quality check. The packaging of such products shall also be the sole responsibility of the customer. The packaging should be good enough to ensure no damage in The sole responsibility of the contents of the packed consignment shall lie with the end customer. Xxxxx and Xxxxx’s logistics partners shall be, in no way, responsible for any shortage or damage of such consignments unless the same is caused solely due to the gross negligence of the Logistics Company. • Emiza’s logistics partners shall verify basic details of the products as per defined parameters at the time of pick up from your end consumer, in case of reverse pick-up service with quality check. The responsibility of providing accurate, descriptive and vivid details is of the User and the responsibility of handing over the correct product along with its accompanied packaging is that of the end consumer. Xxxxx and its logistics service provider is not responsible for the condition of the product and package provided by the end consumer. The packaging should be good enough to ensure no damage in transit. The sole responsibility of the contents of the packaged consignment shall lie with the end consumer. Xxxxx and Xxxxx’s logistics partners shall be, in no way, responsible for any shortage or damage of such consignments unless the same is caused due to the gross negligence of the Logistics • Xxxxx and its logistics service provider shall not be responsible towards any claim for damaged / used products requested for reverse pick-up, irrespective of with or without quality • It is the responsibility of the User/its customer that on receipt of the shipment initiated through reverse pickup, share the AWB number on which the logistics partner has delivered the • The User agrees that there shall be no claim accepted towards Reverse Pickup of Damaged products from the ...

Examples of Reverse Pickup in a sentence

  • By July 1, 2022, the entire Reverse Pickup for employees in the PEPRA and 1.62% and 65 Classic benefit formulas shall be eliminated.

  • If any defects are detected later, the defective books/ CDs shall be replaced free of cost, at the destination of supply. Defective Items or wrongly supplied book(s) & Reverse Pickup: Reverse pick-up of the defective items or wrongly supplied book(s) is the sole responsibility of the respective vendor and the charges are to be borne by the same vendors only.


More Definitions of Reverse Pickup

Reverse Pickup or “DTO” (Deliver to Origin) means collection of the Products by Service Provider from the Customer’s address as specified by the User and the delivery of such products at a location mutually agreed between the Parties.

Related to Reverse Pickup

  • Transverse plane means a vertical plane perpendicular to the median longitudinal plane of the vehicle;

  • Adverse Person means any Person declared to be an Adverse Person by the Board of Directors upon a determination that the criteria set forth in Section 11(a)(ii)(B) apply to such Person.

  • Adverse impact means any deleterious effect on waters or wetlands, including their quality, quantity, surface area, species composition, aesthetics or usefulness for human or natural uses which are or may potentially be harmful or injurious to human health, welfare, safety or property, to biological productivity, diversity, or stability or which unreasonably interfere with the enjoyment of life or property, including outdoor recreation.

  • Adverse Proceeding means any action, suit, proceeding (whether administrative, judicial or otherwise), governmental investigation or arbitration (whether or not purportedly on behalf of Holdings or any of its Subsidiaries) at law or in equity, or before or by any Governmental Authority, domestic or foreign (including any Environmental Claims), whether pending or, to the knowledge of Holdings or any of its Subsidiaries, threatened against or affecting Holdings or any of its Subsidiaries or any property of Holdings or any of its Subsidiaries.

  • COVID-19 Pandemic means the SARS-Cov2 or COVID-19 pandemic, including any future resurgence or evolutions or mutations thereof and/or any related or associated disease outbreaks, epidemics and/or pandemics.

  • Reverse auction means a purchasing process in which offerors submit proposals in competing to sell services or supplies in an open environment via the internet.

  • Reverse auctioning means a procurement method wherein bidders are invited to bid on specified

  • Best available control technology (BACT means an emissions limitation (including a visible emission standard) based on the maximum degree of reduction for each pollutant subject to regulation under CAA which would be emitted from any proposed major stationary source or major modification which the Department, on a case-by-case basis, takes into account energy, environmental, and economic impacts and other costs, determines is achievable for such source or modification through application of production processes or available methods, systems, and techniques, including fuel cleaning or treatment or innovative fuel combustion techniques for control of such pollutant. In no event shall application of best available control technology result in emissions of any pollutant which would exceed the emissions allowed by any applicable standard under 7 DE Admin. Code 1120 and 1121. If the Department determines that technological or economic limitations on the application of measurement methodology to a particular emissions unit would make the imposition of an emissions standard infeasible, a design, equipment, work practice, operational standard, or combination thereof, may be prescribed instead to satisfy the requirement for the application of best available control technology. Such standard shall, to the degree possible, set forth the emissions reduction achievable by implementation of such design, equipment, work practice or operation, and shall provide for compliance by means which achieve equivalent results.

  • Engineer-in-Charge/Consultant/Architect : This term shall mean any authorized representative or person specifically deputed by the Employer wherever they are employed from time to time by the Employer.

  • Assistant Hydrographic Surveyor means the Assistant Hydrographic Surveyor of the Authority, as the case may be

  • Reverse Sequential Order means (a) first, to the reduction of the Note Principal Balance of each B Note, on a Pro Rata and Pari Passu Basis, until the Note Principal Balance of each such Note is reduced to zero; and (b) second, to the reduction of the Note Principal Balance of each of A Note, on a Pro Rata and Pari Passu Basis, until the Note Principal Balance of each such Note is reduced to zero.

  • Course provider means the person or entity approved by and registered with the department pursuant to this rule and who is responsible for conducting a course approved pursuant to this rule.

  • Best available control technology or “BACT” means an emissions limitation, including a visible emissions standard, based on the maximum degree of reduction for each regulated NSR pollutant which would be emitted from any proposed major stationary source or major modification which the reviewing authority, on a case-by-case basis, taking into account energy, environmental, and economic impacts and other costs, determines is achievable for such source or modification through application of production processes or available methods, systems, and techniques, including fuel cleaning or treatment or innovative fuel combination techniques for control of such pollutant. In no event shall application of best available control technology result in emissions of any pollutant which would exceed the emissions allowed by any applicable standard under 567—subrules 23.1(2) through 23.1(5) (standards for new stationary sources, federal standards for hazardous air pollutants, and federal emissions guidelines), or federal regulations as set forth in 40 CFR Parts 60, 61 and 63 but not yet adopted by the state. If the department determines that technological or economic limitations on the application of measurement methodology to a particular emissions unit would make the imposition of an emissions standard infeasible, a design, equipment, work practice, operational standard or combination thereof may be prescribed instead to satisfy the requirement for the application of best available control technology. Such standard shall, to the degree possible, set forth the emissions reduction achievable by implementation of such design, equipment, work practice or operation and shall provide for compliance by means which achieve equivalent results.

  • Adverse system impact means a negative effect that compromises the safety or reliability of the electric distribution system or materially affects the quality of electric service provided by the electric distribution company (EDC) to other customers.

  • Sparkling wine means wine made effervescent with carbon dioxide.

  • Available resources means funds appropriated for the

  • Reasonably Available Control Technology (RACT) means the lowest emission limit that a particular source is capable of meeting by the application of control technology that is reasonably available considering technological and economic feasibility. It may require technology that has been applied to similar, but not necessarily identical source categories.

  • Ignition interlock device means a device that, without tampering or intervention by another person, would prevent the defendant from operating a motor vehicle if the defendant has a blood or breath alcohol concentration of five-hundredths (0.05) or greater; and

  • IOSCO means the International Organisation of Securities Commissions.

  • Adverse reaction means an unexpected outcome that threatens the health or safety of a patient as a result of a medical service, nursing service, or health-related service provided to the patient.

  • Adverse impact on visibility means visibility impairment which interferes with the management, protection, preservation or enjoyment of the visi- tor’s visual experience of the Federal Class I area. This determination must be made on a case-by-case basis taking into account the geographic extent, in- tensity, duration, frequency and time of visibility impairment, and how these factors correlate with (1) times of vis- itor use of the Federal Class I area, and(2) the frequency and timing of natural conditions that reduce visibility.

  • Perennial stream means a well-defined channel that contains water year round during a year of normal rainfall with the aquatic bed located below the water table for most of the year. Groundwater is the primary source of water for a perennial stream, but it also carries stormwater runoff. A perennial stream exhibits the typical biological, hydrological, and physical characteristics commonly associated with the continuous conveyance of water.

  • Drywell means an unlined or partially lined underground pit (regardless of geometry) into which drainage from roofs, basement floors, water softeners or other non-wastewater sources is discharged and from which the liquid seeps into the surrounding soil.

  • Environmental Consultant has the meaning set forth in Section 5.17(a).

  • Engineer/Engineer-in-charge means the Engineer designated by the Employer to superintend and perform other duties as indicated in the contract.

  • Representative of a prospective contractor means an officer or director of a corporation, a member or manager of a limited liability corporation, a partner of a partnership or a trustee of a trust of the prospective contractor.