Runoff Quantity definition

Runoff Quantity means, in respect of a discharge occurring at any Discharge Point, the quantity of runoff water produced by rainfall occurring in areas which drain to that Discharge Point;
Sample 1Sample 2Sample 3

Examples of Runoff Quantity in a sentence

  • Erosion Control, Groundwater Recharge and Runoff Quantity Standards.

  • Erosion Control, Groundwater Recharge and Runoff Quantity Standards 1.

  • A North Carolina Field Study to Evaluate Greenroof Runoff Quantity, Runoff Quality, and Plant Growth.

  • In complying with the Stormwater Runoff Quantity and Rate Standards in Section IV.B, the design engineer shall calculate the stormwater runoff rate and volume using the USDA Natural Resources Conservation Service (NRCS) Runoff Equation, Runoff Curve Numbers, and Dimensionless Unit Hydrograph, as described in the NRCS National Engineering Handbook Part 630 – Hydrology and Technical Release 55 – Urban Hydrology for Small Watersheds, incorporated herein by reference, as amended and supplemented.

  • The deed notice shall contain a description of the stormwater management measure(s) used to meet the Green Infrastructure, Groundwater Recharge, Stormwater Runoff Quality, and Stormwater Runoff Quantity Standards and shall identify the location of the stormwater management measure(s) in NAD 1983 State Plane New Jersey FIPS 2900 US Feet or Latitude and Longitude in decimal degrees.

  • The applicant is required to fill out the General Application Form, the Runoff Quantity Credit Form, and the Runoff Quality Credit Form.

  • In complying with the Stormwater Runoff Quantity and Rate Standards in Paragraph E.2, the design engineer shall calculate the stormwater runoff rate and volume using the USDA Natural Resources Conservation Service (NRCS) Runoff Equation, Runoff Curve Numbers, and Dimensionless Unit Hydrograph, as described in the NRCS National Engineering Handbook Part 630 – Hydrology and Technical Release 55 – Urban Hydrology for Small Watersheds, incorporated herein by reference, as amended and supplemented.

  • WILLIAMS, Oklahoma City Urban Storm Runoff Quantity: Comparison and Calibration of Predictive Methods,Ph.D. Dissertation, University of Oklahoma, Norman, 1979.

  • Stormwater Runoff Quantity Standards (1) This subsection contains the minimum design and performance standards to control stormwater runoff quantity impacts of major development.

  • Runoff Quantity Control: Seepage pits or other infiltration measures shall be provided with a capacity of three (3") inches of runoff for each square foot of new impervious area.

Related to Runoff Quantity

  • Type B quantity means a quantity of radioactive material greater than a Type A quantity.

  • Type A quantity means a quantity of radioactive material, the aggregate radioactivity of which does not exceed A1 for special form radioactive material or A2 for normal form radio- active material, where A1 and A2 are given in Appendix O or may be determined by procedures described in Appendix O.

  • Contract Quantity means the quantity of Gas to be delivered and taken as agreed to by the parties in a transaction.

  • Daily Quantity means the quantity of waste discharged during an operating day.

  • Required Quantity in a unit price Contract shall mean the actual quantity of any item of Work or materials which is required to be performed or furnished in order to comply with the Contract.

  • Quantity means either tonnage or volume, depending on which term is the standard in the mining industry for the type of mineral;

  • Crude Oil means any liquid hydrocarbon mixture occurring naturally in the earth whether or not treated to render it suitable for transportation and includes:

  • Bill of Quantities means the priced and completed Bill of Quantities forming part of the tender.

  • Scheduled Quantity means the net quantity of Gas (being the difference between receipt and delivery nominations) agreed by MDL and the Welded Party to pass through (or, in the case of a Notional Welded Point, be deemed to have passed through) the relevant Welded Point for a Day.

  • Small quantity generator means a generator who generates less than 1000 kg of hazardous waste in a calendar month.

  • Feedstock means a solid waste that will readily decompose during the composting process including but not limited to yard waste, agricultural waste, animal waste, food scraps, animal carcasses, raw rendering material, and mixed solid waste.

  • Bills of Quantities means the priced and completed Bill of Quantities forming part of the tender[where applicable].

  • Daily Contract Quantity or “DCQ” means the quantity of Gas as set out in Clause 4.1 herein.

  • Delivery Point means the point(s) of connection(s) at which energy is delivered into the Grid System i.e. the Interconnection Point.

  • tons means the gross tonnage calculated in accordance with the tonnage measurement regulations contained in Annex I of the International Convention on Tonnage Measurement of Ships, 1969; the word “tonnage” shall be construed accordingly.

  • Bulk gasoline plant means a gasoline storage and distribution facility with an average daily throughput of 20,000 gallons (76,000 liters) of gasoline or less on a 30-day rolling average.

  • Supply Point means the point of connection between the licensed network and your apparatus or equipment.

  • INTER-CONNECTION POINT/ DELIVERY/ METERING POINT means a single point at 220kV or above, where the power from the Project(s) is injected into the identified ISTS Substation (including the dedicated transmission line connecting the Projects with the substation system) as specified in the RfS document. Metering shall be done at this interconnection point where the power is injected into. For interconnection with grid and metering, the WPDs shall abide by the relevant CERC/ SERC Regulations, Grid Code and Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006 as amended and revised from time to time.

  • SCHEDULE OF QUANTITIES, BILL OF QUANTITIES means the Schedule or Quantities as specified and forming part of contract.

  • Refined Products means gasoline, diesel fuel, jet fuel, asphalt and asphalt products, and other refined products of crude oil.

  • Delivery Points means: (i) for natural gas transported by interstate pipelines, the city gate stations of your Utility, and (ii) for electricity, one or more points at which Company, as your agent, has arranged for the delivery of electricity to a third party (such as your Utility) for your account or at your premises.

  • Minimum Order Quantity means the minimum number of batches of a Product to be produced during the same cycle of manufacturing as set forth in a Product Agreement on Schedule B;

  • Diesel means a distillate oil which can be used as fuel for the operation of a compression ignition engine and which has an approximate boiling temperature of between 150 °C to 400 °C;

  • plant products means products of plant origin, unprocessed or having undergone simple preparation in so far as these are not plants, set out in Annex IV-A, Part 3 to this Agreement;

  • Biodiesel means a fuel composed of mono-alkyl esters of long chain fatty acids derived from vegetable oils or animal fats, and, in accordance with standards specified by the American society for testing and materials, designated B100, and meeting the requirements of D-6751, as approved by the department of agriculture.

  • Tank means an enclosed space which is formed by the permanent structure of a ship and which is designed for the carriage of liquid in bulk.