Safety glazing definition

Safety glazing means tempered glass, laminated glass, or rigid plastic.

Safety glazing means material (other than glass) which is so constructed or treated that if fractured it does not fly into fragments likely to cause severe cuts;

Safety glazing means tempered or laminated glass, or rigid plastic.

Examples of Safety glazing in a sentence

• The authorization to develop amendments to UN GTR No.6 (Safety glazing) was adopted by the Executive Committee (AC.3) of the 1998 Agreement at its March 2015 session (ECE/TRANS/WP.29/1114, para.

• Safety glazing shall be identified in accordance with Section 2406.2. Each pane of tempered glass, except tempered spandrel glass, shall be permanently identified by the manufacturer and each pane of laminated glass shall be permanently identified with the laminator, overall glass thickness and trade name of interlayer.

• Safety glazing in place in required locations per code in effect at time structure was constructed.

• Safety glazing complying with B1 of the Building Code of Australia (BCA) is to be used in every glazed door or panel that is capable of being mistaken for a doorway or unimpeded path of travel.

• Safety glazing materials shall be re- quired in all doors with glass panels, sidelights, and any breakable material located within 18 inches of the floor.

• Safety glazing materials shall be required in all doors with glass panels, sidelights, and any breakable material located within 18 inches of the floor.

• Install mirrors as scheduled in Section F29.102 Related WorkCo-ordinate and co-operate with the following trades:Fibre Cement Ceramic Tiling Painting29.103 QualityAll work shall be of the highest standard and carried out by specialists experienced in the particular type of work.29.104 ReferencesComply with applicable portions of the following Australian Standards: AS/ NZS 2208 1996 Safety glazing materials for buildings29.105 Delivery, Handling and StorageHandle materials with care.

• At the 164th session of WP.29, agreement on establishment of Informal Working Group on Safety glazing submitted to the AC.3.

• Water staining Moisture damage Glazing installed in areas that have a high potential for human impact must comply with Australian Standards Safety glazing requirements.Glazing that is thin, inadequately installed, cracked or old can break into shards capable of causing terrible injury.

• Glazing installed in areas that have a high potential for human impact must comply with Australian Standards Safety glazing requirements.

More Definitions of Safety glazing

Safety glazing means material (other than glass) which is so constructed or treated that if fractured it does not fly into fragments likely to cause severe cuts. There is a large range of materials which can be fitted as safety glazing and it is not possible to identify these positively at the test, as there is no requirement for marking.

Safety glazing means transparent material other than glass, so constructed or treated that, when fractured, the possibility of flying fragments or sharp splinters is minimised;

Safety glazing means material other than glass so manufactured or treated that if fractured it does not break into fragments likely to cause severe cuts.

Safety glazing means tempered glass, laminated glass, or rigid plastic. 61. “Safety hazard” means a condition in a readily accessible installed system