Service neutrality definition

Service neutrality means that network operators are allowed to provide any service their technology and infrastructure can deliver.
Sample 1Sample 2Sample 3
Service neutrality means rules allowing a Licensee to offer or use any type of approved Communications Service authorized under its respective Operating License;
Sample 1Sample 2

Examples of Service neutrality in a sentence

  • There has been interest towards adopting the concept of Cantor Spectrum Exchange that has for 55 years been brokering electricity and spectrum in the U.S. However, development of secondary market is still under way as it is causing disagreement between EU and local level authorities.35• Service neutrality – The effectiveness of technology neutral licensing can be limited, not only by spectrum allocation practices, but also by setting requirements for the services that license owner should provide.

  • Service neutrality enables network operators with spectrum licences to offer any type of service to end-users in the spectrum they hold.

  • In some cases, of course, the need to avoid interference may tilt the choice toward certain technologies rather than others.• Service neutrality means that the spectrum holder can choose what service to offer using its spectrum rights.

  • Service neutrality allows the license owner to experiment which services are most cost- efficient or receive the best market response.

  • In the event personal leave is used pursuant to this section, the personal leave will be deducted from the teacher’s personal leave at the rate of one-half (1/2) day of personal leave for each day of absence during summer school.

  • Service neutrality removes this restriction and therefore results in a more efficient use of spectrum.

  • Service neutrality is a policy approach which enables telecommunications network operators with spectrum licences to offer any type of service to end-users according to the national frequency allocation plan.

  • Service neutrality - no preference is given to any particular type of service or technology, while ensuring the use of common standards and protocols that enable interoperability;.

  • Service neutrality allows a user or licensee to provide or use any service in the allocated/assigned spectrum.

  • The Service neutrality or the OS neutrality may become real problems in the next ten years.

Related to Service neutrality

  • Quality Management Plan means the portion of the Project Development Plan providing the information requested in Section 4.3 of Exhibit B to the ITP.

  • Quality system means documented organizational procedures and policies: internal audits of those policies and procedures: management review and recommendation for quality improvement.”

  • Corrective Measure means a measure as defined in Article 3, point 16, of Regulation (EU) 2019/1020;

  • Health and Safety Plan means a documented plan which addresses hazards identified and includes safe work procedures to mitigate, reduce or control the hazards identified;

  • Remedial Design or “RD” shall mean those activities to be undertaken by SDs to develop final plans and specifications for the RA as stated in the SOW.

  • Quality Standards means the quality standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent body, (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Contractor would reasonably and ordinarily be expected to comply with, and as may be further detailed in the Specification.

  • Standard Methods for the Examination of Water and Wastewater means the most recent edition of Standard Methods for the Examination of Water and Wastewater published jointly by the American Public Health Association, the American Waterworks Association and the Water Environment Federation;

  • Testing laboratory means a laboratory, facility, or entity in the state that offers or performs tests of cannabis or cannabis products and that is both of the following:

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • Reliability means the degree of performance of the elements of the electric system that results in electricity being delivered to and from an applicant in the amount desired while avoiding adverse effects on the adequacy and security of the electric supply, defined respectively as:

  • health and safety specification means a site, activity or project specific document prepared by the client pertaining to all health and safety requirements related to construction work;

  • Independent testing laboratory means an independent organization, accepted by the Contracting Officer, engaged to perform specific inspections or tests of the work, either at the site or elsewhere, and report the results of these inspections or tests.

  • Mold remediation in accordance with professional standards means mold remediation of that

  • Preventive Care means certain Preventive Care services.

  • quality (functionality means the totality of features and characteristics of a product or service that bear on its ability to satisfy stated or implied needs F.1.4 Communication and employer’s agentEach communication between the employer and a tenderer shall be to or from the employer's agent only, and in a form that can be read, copied and recorded. Writing shall be in the English language. The employer shall not take any responsibility for non-receipt of communications from or by a tenderer. The name and contact details of the employer’s agent are stated in the tender data. F.1.5 The employer’s right to accept or reject any tender offer F.1.5.1 The employer may accept or reject any variation, deviation, tender offer, or alternative tender offer, and may cancel the tender process and reject all tender offers at any time before the formation of a contract. The employer shall not accept or incur any liability to a tenderer for such cancellation and rejection, but will give written reasons for such action upon written request to do so. F.1.5.2 The employer may not subsequent to the cancellation or abandonment of a tender process or the rejection of all responsive tender offers re-issue a tender covering substantially the same scope of work within a period of six months unless only one tender was received and such tender was returned unopened to the tenderer. F.2 Tenderer’s obligations F.2.1 EligibilitySubmit a tender offer only if the tenderer satisfies the criteria stated in the tender data and the tenderer, or any of his principals, is not under any restriction to do business with employer. F.2.2 Cost of tenderingAccept that the employer will not compensate the tenderer for any costs incurred in the preparation and submission of a tender offer, including the costs of any testing necessary to demonstrate that aspects of the offer satisfy requirements. F.2.3 Check documentsCheck the tender documents on receipt for completeness and notify the employer of any discrepancy or omission. F.2.4 Confidentiality and copyright of documentsTreat as confidential all matters arising in connection with the tender. Use and copy the documents issued by the employer only for the purpose of preparing and submitting a tender offer in response to the invitation. F.2.5 Reference documentsObtain, as necessary for submitting a tender offer, copies of the latest versions of standards, specifications, conditions of contract and other publications, which are not attached but which are incorporated into the tender documents by reference. F.2.6 Acknowledge addendaAcknowledge receipt of addenda to the tender documents, which the employer may issue, and if necessary apply for an extension to the closing time stated in the tender data, in order to take the addenda into account. F.2.7 Clarification meetingAttend, where required, a clarification meeting at which tenderers may familiarize themselves with aspects of the proposed work, services or supply and raise questions. Details of the meeting(s) are stated in the tender data. F.2.8 Seek clarificationRequest clarification of the tender documents, if necessary, by notifying the employer at least five working days before the closing time stated in the tender data. F.2.9 InsuranceBe aware that the extent of insurance to be provided by the employer (if any) might not be for the full cover required in terms of the conditions of contract identified in the contract data. The tenderer is advised to seek qualified advice regarding insurance. F.2.10 Pricing the tender offer F.2.10.1 Include in the rates, prices, and the tendered total of the prices (if any) all duties, taxes (except Value Added Tax (VAT), and other levies payable by the successful tenderer, such duties, taxes and levies being those applicable 14 days before the closing time stated in the tender data. F2.10.2 Show VAT payable by the employer separately as an addition to the tendered total of the prices.

  • Remediation Plan means a report identifying:

  • Service Level Standards has the meaning ascribed thereto in Section 2.1 hereof.

  • Reliability Standard means a requirement to provide for reliable operation of the bulk power system, including without limiting the foregoing requirements for the operation of existing bulk power system facilities, including cybersecurity protection, and the design of planned additions or modifications to such facilities to the extent necessary for reliable operation of the bulk power system, but shall not include any requirement to enlarge bulk power system facilities or to construct new transmission capacity or generation capacity.

  • Interoperability means the ability of a CenturyLink OSS Function to process seamlessly (i.e., without any manual intervention) business transactions with CLEC's OSS application, and vice versa, by means of secure exchange of transaction data models that use data fields and usage rules that can be received and processed by the other Party to achieve the intended OSS Function and related response. (See also Electronic Bonding.)

  • Quality improvement organization or “QIO” shall mean the organization that performs medical peer review of Medicaid claims, including review of validity of hospital diagnosis and procedure coding information; completeness, adequacy and quality of care; appropriateness of admission, discharge and transfer; and appropriateness of prospective payment outlier cases. These activities undertaken by the QIO may be included in a contractual relationship with the Iowa Medicaid enterprise.

  • Quality Plan means the quality plan to be produced by the Contractor in accordance with Schedule S2-10 (Quality Plan);

  • Architectural coating means a coating applied to stationary structures and their appurtenances, to mobile homes, to pavements, or to curbs.

  • HCPCS means the Healthcare Common Procedure Coding System.

  • Quality Assurance Plan or “QAP” shall have the meaning set forth in Clause 11.2;

  • Kyoto Protocol means the protocol to the UNFCCC adopted at the Third Conference of the Parties to the UNFCCC in Kyoto, Japan on 11 December 1997 as may be amended;

  • Process Wastewater means any water which, during manufacturing or processing, comes into direct contact with or results from the production or use of any raw material, intermediate product, finished product, by-product, or waste product.