Serviceability definition

Serviceability means useable as is or with some maintenance, but not so degradedas to essentially require reconstruction.
Sample 1Sample 2
Serviceability means the condition of a piece of equipment at any point in time that affects the ability of the equipment to perform its function(s) as intended.
Sample 1
Serviceability means useable as is or with some maintenance, but not so degraded as to essentially require reconstruction.
Sample 1

Examples of Serviceability in a sentence

  • Serviceability Return Period Factor increased from 0.25 to 0.33 (80% increase in the serviceability design loads when combined with the Hazard Factor increase)The increase in the above factors has resulted in a reduction in the level of compliance of an existing building relative to a new building despite the capacity of the existing building not changing.

  • The IEP does not attempt to estimate Serviceability Limit State (SLS) performance of the building, or the level of earthquake that would start to cause damage to the building5.

  • Serviceability Return Period Factor increased from 0.25 to 0.33 (80% increase in the serviceability design loads when combined with the Hazard Factor increase) The increase in the above factors has resulted in a reduction in the level of compliance of an existing building relative to a new building despite the capacity of the existing building not changing.

  • Serviceability includes sighting and calibration of weapons and periodic test firing as permitted in the mission area.

  • In prior years, data were only available using the Present Serviceability Rating.

  • The DEE does also consider Serviceability Limit State (SLS) performance of the building and or the level of earthquake that would start to cause damage to the building but this result is secondary to the ULS performance.

  • FHWA established five metrics to assess pavement condition: International Roughness Index (IRI); cracking percent; rutting; faulting; and Present Serviceability Rating (PSR).

  • Serviceability: Provide diagnostic LEDs for power, communication, and processor.

  • Serviceability: The compound shall resist deterioration by contact with sodium chloride, calcium chloride or other chemicals used to prevent roadway ice, or because of the oil content of pavement materials or from oil droppings or other effects of traffic.

  • Serviceability: It is recognized that each manufacturers’ system contains components that are proprietary to the development of their systems.


More Definitions of Serviceability

Serviceability means the status of a Component that will be either:
Sample 1
Serviceability. Serviceability means an item is still usable and is not permanently stained or damaged in any way. A serviceable item will not require any repair (replacement of buttons, zippers, belt loops, pockets, shoulder loops, etc.).
Sample 1
Serviceability means the capability of a component, pipe, and sewer to perform the function for which it was intended.
Sample 1

Related to Serviceability

  • traceability means the ability to trace and follow a food, feed, food-producing animal or substance intended to be, or expected to be incorporated into a food or feed, through all stages of production, processing and distribution;

  • Permeability of a space means the ratio of the volume within that space which is assumed to be occupied by water to the total volume of that space.

  • Turbidity means the cloudy condition of water due to the presence of extremely fine particulate materials in suspension that interfere with the passage of light.

  • durability means the ability of components and systems to last so that the environmental performance can still be met after a mileage set out in paragraph 2.4. and so that vehicle functional safety is ensured, if the vehicle is used under normal or intended circumstances and serviced in accordance with the manufacturer’s recommendations.

  • Quality means the totality of features and characteristics of a product or service that bear on its ability to satisfy stated or implied needs;

  • Repeatability means the range of values within which the repeat results of cigarette test trials from a single laboratory will fall 95 percent of the time.

  • Structural components means liners, leachate collection systems, final covers, run-on/run-off systems, and any other component used in the construction and operation of the MSWLF that is necessary for protection of human health and the environment.

  • Structural component means a component that supports non-variable forces or weights (dead loads) and variable forces or weights (live loads).

  • compatibility means compatibility as defined in point (10) of Article 2 of Directive (EU) 2019/770;

  • Stability means structural stability.

  • Serviceable when used to describe an Engine or Part, means in an airworthy condition within the limits defined in the applicable Engine manuals, specification and/or publications by the type certificate holder.

  • Interoperability means the ability of a Qwest OSS Function to process seamlessly (i.e., without any manual intervention) business transactions with CLEC's OSS application, and vice versa, by means of secure exchange of transaction data models that use data fields and usage rules that can be received and processed by the other Party to achieve the intended OSS Function and related response. (See also Electronic Bonding.)

  • Reliability means the degree of performance of the bulk electric system that results in electricity being delivered within Reliability Standards and in the amount desired. Electric system Reliability can be addressed by considering two basic and functional aspects of electric systems, which are Adequacy and Security.

  • Integrity means that personal data should be accurate and suitable for the purpose for which it is processed.

  • Nonconforming structure means a structure the size, dimension or location of which was lawful prior to the adoption, revision or amendment of a zoning ordinance, but which fails to conform to the requirements of the zoning district in which it is located by reasons of such adoption, revision or amendment.

  • Configuration means State-specific changes made to the Software without Source Code or structural data model changes occurring.

  • Parts means any and all appliances, parts, instruments, appurtenances, accessories, furnishings and other equipment of whatever nature (other than (a) complete Engines or engines and (b) Excluded Equipment), so long as the same are incorporated or installed in or attached to the Airframe or any Engine or so long as the same are subject to the Lien of the Indenture in accordance with the terms of Section 7.04 thereof after removal from the Airframe or any Engine.

  • Erection, construction, remodeling, repairing means all types of work done on a particular building or work at the site thereof in the construction or development of the project, including without limitation, erecting, construction, remodeling, repairing, altering, painting, and decorating, the transporting of materials and supplies to or from the building or work done by the employees of the Contractor, Subcontractor, or Agent thereof, and the manufacturing or furnishing of

  • Degradation means a decrease in the useful life of the right-of-way caused by excavation in or disturbance of the right-of-way, resulting in the need to reconstruct such right-of-way earlier than would be required if the excavation or disturbance did not occur.

  • Architectural coating means a coating applied to stationary structures and their appurtenances, to mobile homes, to pavements, or to curbs.

  • Visibility impairment means any humanly perceptible change in visual range, contrast, or coloration from that which would have existed under natural visibility conditions.

  • Structural as herein used means any portion of the Premises or Complex which provides bearing support to any other integral member of the Complex such as, by limitation, the roof structure (trusses, joists, beams), posts, load bearing walls, foundations, girders, floor joists, footings, and other load bearing members constructed by Landlord.

  • Process weight means the total weight of all materials introduced into any source operation. Solid fuels charged will be considered as part of the process weight, but liquid and gaseous fuels and combustion air will not.

  • Preventive measures means any reasonable measures taken by any person after an incident has occurred to prevent or minimize pollution damage.

  • Efficiency means the gas turbine manufacturer's rated heat rate at peak load in terms of heat input per unit of power output based on the lower heating value of the fuel.

  • Nonconformance as used in this clause means a condition of any hardware, software, material, or service/workmanship in which one or more characteristics do not conform to requirements.