Services Installation definition

Services Installation means the cost of installation and/or setup for the Services as specified in this Agreement

Examples of Services Installation in a sentence

  • Subject to the payment of fees, Flock shall monitor the performance and functionality of Flock Services and may, from time to time, advise Agency on changes to the Flock Services, Installation Services, or the Designated Locations which may improve the performance or functionality of the Services or may improve the quality of the Footage.

  • Services: Professional Services, Installation Services, training services and Managed Services provided (if any) by O24 as set out in the Service and Product Description.

  • It is the Tenant's responsibility to employ the Nominated Registered Fire Services Installation Contractor to certify the existing fire services system of the premises on Form FS251 upon completion of fit-out works or after inspection if the tenant takes over the premises in "as is" condition.

  • All Fire Services system addition and alteration works must be carried out by one of the Nominated Registered Fire Services Installation Contractor(s) listed in Appendix VI of this Fit-Out Guide at Tenant’s cost.

  • Prepare the environment by configuring a Windows Network Load Balancing cluster containing two nodes: node A and node B. The public IP address of this Windows Network Load Balancing cluster is IP01. Node A’s IP address is IP02. Node B’s IP address is IP03.2. In the Services Installation step of DocAve 6 Manager for SharePoint Installation Wizard, selectAdvanced as the method.

  • Within 14 days of completion, the Tenant are required to submit 2 full sets of as-fitted drawings with a copy of the Completion Certificate of the Electrical Works, i.e. WR-1, and Fire Services Installation, i.e. Form 251, to the Controller for reference and record.

  • For Services (Installation, Commissioning Training etc.): 100% within 15 days after successful completion of job (In case applicable).

  • Except under the circumstances of force majeure as described, if the SECOND PARTY fails to deliver any or all of the Goods by date(s) of delivery as per conditions of the contract, FIRST PARTY may, without prejudice to any or all its other remedies under the contract, deduct from the Contract Price, as per table - 9 Penalty for delayed delivery / delayed setting up of Services, Installation and Commissioning at Section I: Instructions to Bidders under sub- section A.

  • There is a standard procedure for a separate on‐site servicing permit prior to issuance of the building permit (see Appendix for 'On‐Site Services Installation Application').

  • You can also choose to configure the JDBC driver after installation by manually copying files to the locations required by Data Services.For more information, see “Post-installation, Configuring JDBC drivers for SAP HANA, Oracle, and MySQL” in theSAP Data Services Installation Guide.

Related to Services Installation

  • Existing installation means an installation, construction of which began prior to the effective date of any regulation having application to it.

  • water installation means the pipes and water fittings which are situated on any premises and ownership thereof vests in the owner thereof and used or intended to be used in connection with the use of water on such premises, and includes a pipe and water fitting situated outside the boundary of the premises, which either connects to the connection pipe relating to such premises or is otherwise laid with the permission of the municipality;

  • Installation Services means all those services ancillary to the supply of the Plant and Equipment for the Facilities, to be provided by the Contractor under the Contract; e.g., transportation and provision of marine or other similar insurance, inspection, expediting, site preparation works (including the provision and use of Contractor’s Equipment and the supply of all construction materials required), installation, testing, pre-commissioning, commissioning, operations, maintenance, the provision of operations and maintenance manuals, training, etc.

  • Standard Installation means the installation of drop cable to a customer’s premise where the distance from the point of entry into the building being served is less than 150 feet from the active cable television system plant.

  • meter installation means the meter and, if so equipped, the instrument transformers, wiring, test links, fuses, lamps, loss of potential alarms, meters, data recorders, telecommunication equipment and spin-off data facilities installed to measure power past a meter point, provide remote access to the metered data and monitor the condition of the installed equipment;

  • New installation means an installation, construction of which began after the effective date of any regulation having application to it.

  • Nuclear installation means any installation of such class or description as may be prescribed by regulations made by the relevant Secretary of State from time to time by statutory instrument, being an installation designed or adapted for:

  • drainage installation means a system situated on any premises and vested in the owner thereof and is used for or intended to be used for or in connection with the reception, storage, treatment or conveyance of sewage on that premises to the connecting point and includes drains, fittings, appliances, septic tanks, conservancy tanks, pit latrines and private pumping installations forming part of or ancillary to such systems;

  • Installation Site means the site at which the Product is originally installed.

  • Installation Works means, as the context so requires,

  • Utility Installation means carpeting, window coverings, air lines, power panels, electrical distribution systems, lighting fixtures, space heaters, air conditioning, plumbing, and fencing. Lessor may require that Lessee remove any or all of said alterations, improvements, additions or Utility Installations at the expiration of the term, and restore the Premises to their prior condition. Lessor may require Lessee to provide Lessor, at Lessee's sole cost and expense, a lien and completion bond in an amount equal to one and one-half times the estimated cost of such improvements, to insure Lessor against any liability for mechanic's and materialmen's liens and to insure completion of the work. Should Lessee make any alterations, improvements, additions or Utility Installations without the prior approval of Lessor, Lessor may require that Lessee remove any or all of the same.

  • Installation Work means the construction and installation of the System and the Start-up, testing and acceptance (but not the operation and maintenance) thereof; all performed by or for the Power Producer at the Premises.

  • Installation means that the System or a Subsystem as specified in the Contract is ready for Commissioning as provided in GCC Clause 26 (Installation).

  • Installation Date means the date specified in the Statement of Work by which the Contractor must have the ordered Equipment ready (certified) for use by the State.

  • Utility Installations is used in this Lease to refer to all air lines, power panels, electrical distribution, security, fire protection systems, communications systems, lighting fixtures, heating, ventilating and air conditioning equipment, plumbing, and fencing in, on or about the Premises. The term "TRADE FIXTURES" shall mean Lessee's machinery and equipment which can be removed without doing material damage to the Premises. The term "ALTERATIONS" shall mean any modification of the improvements on the Premises which are provided by Lessor under the terms of this Lease, other than Utility Installations or Trade Fixtures. "LESSEE-OWNED ALTERATIONS AND/OR UTILITY INSTALLATIONS" are defined as Alterations and/or Utility Installations made by Lessee that are not yet owned by Lessor pursuant to Paragraph 7.4(a). Lessee shall not make nor cause to be made any Alterations or Utility Installations in, on, under or about the Premises without Lessor's prior written consent. Lessee may, however, make non-structural Utility Installations to the interior of the Premises (excluding the roof) without Lessor's consent but upon notice to Lessor, so long as they are not visible from the outside of the Premises, do not involve puncturing, relocating or removing the roof or any existing walls, or changing or interfering with the fire sprinkler or fire detection systems and the cumulative cost thereof during the term of this Lease as extended does not exceed $2,500.00.

  • electrical installation means an electrical installation as defined in the Regulations;

  • Building, structure, facility, or installation means all of the pollutant-emitting activities which belong to the same industrial grouping, are located on one or more contiguous or adjacent properties, and are under the control of the same person (or persons under common control) except the activities of any vessel. Pollutant-emitting activities shall be considered as part of the same industrial grouping if they belong to the same major group (i.e., which have the same two-digit code) as described in the Standard Industrial Classification Manual, 1972, as amended by the 1977 Supplement (U.S. Government Printing Office stock numbers 4101-0066 and 003-005-00176-0, respectively).

  • Telecommunications Equipment means equipment, other than Customer Premises Equipment, used by a Carrier to provide Telecommunications Services, and include software integral to such equipment, including upgrades.

  • Permanent radiographic installation means an enclosed shielded room, cell, or vault, not located at a temporary jobsite, in which radiography is performed.

  • Telecommunications Access Device means that term as defined in Section 219a of the Michigan Penal Code, 1931 PA 328, MCL 750.219a, as may be amended from time to time. As of January 2012, "Telecommunication Access Device" is defined to mean any of the following:

  • Construction Services means either of the following for construction-manager-at-risk, design-build and job-order-contracting project delivery methods:

  • Installation Charges means those Charges set out in the Order in relation to installation of the Service and/or any Purchased Equipment, Customer Equipment and/or BT Equipment as applicable.

  • Construction Phase Services means the coordination, implementation and execution of the Work required by this Agreement, which are further defined in Article 8.

  • Removable Installations means any items listed on Exhibit F attached hereto and any items agreed by Landlord in writing to be included on Exhibit F in the future, (y) “Tenant’s Property” means Removable Installations and, other than Installations, any personal property or equipment of Tenant that may be removed without material damage to the Premises, and (z) “Installations” means all property of any kind paid for by Landlord, all Alterations, all fixtures, and all partitions, hardware, built-in machinery, built-in casework and cabinets and other similar additions, equipment, property and improvements built into the Premises so as to become an integral part of the Premises, including, without limitation, fume hoods which penetrate the roof or plenum area, built-in cold rooms, built-in warm rooms, walk-in cold rooms, walk-in warm rooms, deionized water systems, glass washing equipment, autoclaves, chillers, built-in plumbing, electrical and mechanical equipment and systems, and any power generator and transfer switch.

  • Building Services Definitions

  • Installations means all property of any kind paid for by Landlord, all Alterations, all fixtures, and all partitions, hardware, built-in machinery, built-in casework and cabinets and other similar additions, equipment, property and improvements built into the Premises so as to become an integral part of the Premises, including, without limitation, fume hoods which penetrate the roof or plenum area, built-in cold rooms, built-in warm rooms, walk-in cold rooms, walk-in warm rooms, deionized water systems, glass washing equipment, autoclaves, chillers, built-in plumbing, electrical and mechanical equipment and systems, and any power generator and transfer switch.