Sleep mode definition

Sleep mode means a low power mode that a computer is capable of entering automatically after a period of inactivity or by manual selection. In this mode the computer will respond to a wake event. For systems where Advanced Configuration and Power Interface (ACPI) standards are applicable, a sleep mode usually correlates to ACPI system level G1/S3 (suspend to RAM) state;
Sample 1Sample 2
Sleep mode means a low-power mode that the computer enters automatically after a period of inactivity or by manual selection. A computer with sleep capability can quickly “wake” in response to network connections or user interface devices with a latency of less than or equal to five seconds from initiation of the wake event to the system becoming fully usable, including rendering of display. For systems where ACPI standards are applicable, sleep mode is ACPI System Level S3 (suspend to RAM) state. Some computers utilize an alternative sleep mode to ACPI S3.
Sample 1Sample 2Sample 3
Sleep mode means a function of a device that blanks partially or totally the indications after a defined period of non use, in order to save the screen or to display information other than weights.
Sample 1Sample 2

Examples of Sleep mode in a sentence

  • Sleep mode reduces power consumption when a resume time of 15 µs is acceptable.

  • Sleep mode is activated after nil movement for minimum 30 minutes.

  • Preserve and protect any crime scene until appropriate steps can be taken to collect any evidence.

  • For the purposes of this specification, Sleep mode correlates to ACPI System Level S3 (suspend to RAM) state, where applicable.

  • The Cortex-M4 processor sleep modes reduce the power consumption: Sleep mode stops the processor clock Deep sleep mode stops the system clock and switches off the PLL and flash memory.The SLEEPDEEP bit of the SCR selects which sleep mode is used; see “System Control Register” .This section describes the mechanisms for entering sleep mode, and the conditions for waking up from sleep mode.

  • The Cortex-M4 processor sleep modes reduce the power consumption: Sleep mode stops the processor clock Deep sleep mode stops the system clock and switches off the PLL and flash memory.The SLEEPDEEP bit of the SCR selects which sleep mode is used; see “System Control Register”.This section describes the mechanisms for entering sleep mode, and the conditions for waking up from sleep mode.

  • Additionally, for products that meet the Standby-power requirements in Ready or Sleep mode, no further power reductions are required to earn the ENERGY STAR.

  • The device is able to exit Sleep mode quickly since all circuits remain active.

  • When your spa is in Sleep mode, the water temperature flashes alternately with “SL”on the display when the pump is running on low speed, after diagnostic testing, during or a filtration cycle, or when you press the “Cool” button once.

  • Products may have more than one low power mode but these proposed criteria address Sleep mode as defined in this specification.


More Definitions of Sleep mode

Sleep mode means the operational mode of a display that is (i) connected to a power source, and (ii) has been placed into a low-power mode by receiving a signal from a connected device (e.g. computer, game console, or set-top box) or by cause of an internal function such as a sleep timer or occupancy sensor. Sleep Mode is considered a “soft” low-power condition, in that the display can be brought out of Sleep Mode by receiving a signal from a connected device or by cause of an internal function.
Sample 1
Sleep mode. , in relation to a VMS unit, means a standby mode in which the unit is only capable of operating at specified intervals;
Sample 1
Sleep mode means a mode in which the device is inactive but is not powered-down;
Sample 1
Sleep mode means a low power mode that a computer is capable of entering automatically after a period of inactivity or by manual selection. In this mode the computer will respond to a wake event. For systems where Advanced Configuration and Power Interface (ACPI) standards are applicable, a sleep mode usually correlates to Advanced Configuration and Power Interface system level G1/S3 (suspend to RAM) state.‘Psleep’ represents the sleep mode power in Watts as measured according to the procedures in Annex II.
Sample 1

Related to Sleep mode

  • Node means an area designated by the State Planning Commission concentrating facilities and activities which are not organized in a compact form.

  • Co-generation means the sequential production of electricity

  • Roll coating means the application of a coating material to a substrate by means of hard rubber or steel rolls.

  • Common Channel Signaling (CCS) means an out-of-band, packet-switched, signaling network used to transport supervision signals, control signals, and data messages. It is a special network, fully separate from the transmission path of the public switched network. Unless otherwise agreed by the Parties, the CCS protocol used by the Parties shall be SS7.

  • Electric bicycle means a "class 1 electric bicycle," a "class 2 electric bicycle," or a "class 3 electric bicycle" as defined in this section.

  • Diameter at Breast Height (DBH) means the diameter of a tree at 4 1/2 feet above the ground measured from the uphill side.

  • high voltage means the set of nominal voltage levels that are used in power systems for bulk transmission of electricity in the range of 44kV<Un 220 kV. [ SANS 1019];