SSID definition

SSID means Statewide Student Identifier.
Sample 1Sample 2Sample 3
SSID means “Service Set Identifier” which defines the wireless network name broadcasted from the WiFi service
Sample 1Sample 2Sample 3
SSID means service set identifier, being a code identifying a WLAN.
Sample 1Sample 2Sample 3

Examples of SSID in a sentence

  • Student Name District Student ID_ Date of Birth SSID Parent/Guardian Signature Date District or Charter School Please provide a copy of the Home Language Survey to the EL Coordinator/Main Contact on site.

  • It is highly recommended that you should use the IEEE 802.11n communication protocol in order to avoid any possible problems while watching videos.• You must change your modem’s SSID when there are any other modems around with the same SSID.

  • For example, if the scheme is “ISAN” then the <SSID> would be an ISAN number.There is a special case where <scheme> is “org”.

  • These are specific to ID type and are therefore discussed in sections addressing IDs of each type.• <SSID> (scheme specific ID) is a string that corresponds with IDs in scheme <scheme>.

  • A ContentID must be globally unique.The following restrictions apply to the <scheme> and <SSID> part of a ContentID:• A ContentID scheme may not contain the colon character.• Where display formats exists (i.e., human readable versus computer-readable) use display format.• ContentID < scheme> and ContentID <SSID> shall be in accordance with Table 2-1.


More Definitions of SSID

SSID. TP-LINK_5G_8EF4",
Sample 1
SSID magewell", "bssid": "94:a6:7e:61:75:c6", "frequency": 5220,
Sample 1
SSID. Means the adapter is connected or will be connected, the right figure shows that the adapter is connected, SSID is the default network. BSSID -- Means the MAC address of connected AP or the basic service device ID of Hoc AP. Channel- Shows the present signal channel of the adapter. As the signal can scan the usable channel and always change the channel, this figure is changeable. Encryption - Means wireless network encryption information. All the devices in the network have to use the same encryption to ensure the communication. There are two network models: Infrastructure and AD Hoc. Infrastructure-- means to get connection by AP, once connected, AP will permit you to access wireless network or LAN network. If the connection is infrastructure, the Channel will display Auto. AD Hoc-- Means to get connection not by AP, AD Hoc can be built conveniently without any plan in advance. For example, all the persons in the meeting could share the meeting record in the meeting room. Rescan-- Make the adapter rescan the available device. If the link is not good or the signal is too weak, the rescan will make the adapter link to a better device which will take several seconds. Add to Profile – Save the corresponding information of the usable equipment which searched by wireless adapter and the corresponding settings. Connect-- Choose Network from Network list and click it to link.
Sample 1
SSID. USB-Fusion_3002", "hw_mode": "g", "channel": 1, "country-code": "CN", "support-freq": [ {
Sample 1
SSID. USB-Fusion_yx_5G", "use-dhcp": true,
Sample 1
SSID magewell", "state": 2 }, "user-items": [ {
Sample 1
SSID magewell", "state": 2, "status": 0 } status 0 indicates that the request was accepted successfully. Refer to API Status Codes to find specific description for other values. ssid The SSID of the connected AP state The AP connection status 0: idle, not connected 1: connecting, please wait 2: connected 3: wrong password 4: connection failed 5: connection timed out Parameter‌ Description iface The network card name ssid The AP name { "status": 0 } status 0 indicates that the request was accepted successfully. Refer to API Status Codes to find specific description for other values. Parameter‌ Description iface The network card name ssid The AP name { "status": 0 } status 0 indicates that the request was accepted successfully. Refer to API Status Codes to find specific description for other values. Response Body‌ { "status": 0 } status 0 indicates that the request was accepted successfully. Refer to API Status Codes to find specific description for other values. Response Body‌ { "up-to-date": true, "status": 0 } status 0 indicates that the request was accepted successfully. Refer to API Status Codes to find specific description for other values. up-to-date True indicates the current firmware is up to date, otherwise it is false. version The latest version size The size of the latest version md5 The MD5 value of the latest version changeLog The upgrade content of the latest version Response Body‌ { "status": 0, "up-to-date": true,
Sample 1