Standard engineering practices definition

Standard engineering practices means that accepted, peer reviewed sets of criteria are used in designing equipment (i.e. Uniform Building, Electrical, and Fire Codes, recommendations of the American Conference of Governmental Industrial Hygienists, guidelines of the Department of Labor and Industry, etc.).
Sample 1Sample 2Sample 3

Examples of Standard engineering practices in a sentence

  • Standard engineering practices, including soils investigation and compaction techniques, are sufficient to mitigate most seismic hazards in the City.

  • Standard engineering practices as specified in the two technical reports would ensure that the project developments would not pose a significant risk to people or structures in the event of a seismic activity.

  • Standard engineering practices and API requirements pertaining to pumps of this type shall be used where not specifically described in the OEM manual.

  • Standard engineering practices should be followed when performing excavation at contaminated sites.During excavation, there are multiple situations which will require methods to prevent the walls of the excavation from slumping into the hole.

  • Standard engineering practices will be applied for items not covered in the SWM Manual.

  • Standard engineering practices have been developed to effectively address such concerns.

  • Standard engineering practices in the California Building Code and applicable permit requirements, and standard best management practices would be applied to reduce the potential for erosion and topsoil loss; these are included in Applicant measures listed in the Project Description.

  • Standard engineering practices should include coordination with adjacent landowners where future road improvements will impact construction in the PROW.25 To contribute further to the ongoing debate concerning the use of public rights-of-way by members of the telecommunications industry, the State and Local Policy Initiatives subgroup developed a set of uniform rights-of-way management practices and procedures.

  • The unit should be skid mounted.2. Standard engineering practices should be followed while designing the unit.3. Safety devices should be present wherever required.4. Vendors are informed that the specifications mentioned are based on a conceptual design.

  • Standard engineering practices or site-specific recommendations provided in a geotechnical report that may be prepared for the proposed project would be used to engineer soil stability to prevent foundation cracking.

Related to Standard engineering practices

  • Good Engineering Practice means, Works carried out in accordance with the following standards/ specifications,

  • Good Manufacturing Practices means current good manufacturing practices, as set forth in 21 C.F.R. Parts 210 and 211.

  • Current Good Manufacturing Practices or “cGMP” means applicable Good Manufacturing Practices as specified in the United States Code of Federal Regulations and/or the EU Good Manufacturing Guidelines, and any successor legislation from time to time, prevailing at the time of the manufacture of the Product.

  • Good Manufacturing Practice or “GMP” means the current good manufacturing practices applicable from time to time to the manufacturing of a Product or any intermediate thereof pursuant to Applicable Law.

  • Practice of engineering means any service or creative work, the adequate performance of which requires engineering education, training, and experience in the application of special knowledge of the mathematical, physical, and engineering sciences.

  • Good Laboratory Practices or “GLP” means the then-current Good Laboratory Practice (or similar standards) for the performance of laboratory activities for pharmaceutical products as are required by applicable Regulatory Authorities or Applicable Law. In the United States, Good Laboratory Practices are established through FDA regulations (including 21 C.F.R. Part 58), FDA guidance, FDA current review and inspection standards and current industry standards.

  • Standard Specifications means a compilation in book form of specifica- tions approved for general application and repetitive use;

  • Good Laboratory Practice or “GLP” means the applicable then-current standards for laboratory activities for pharmaceuticals (including biologicals) or vaccines, as applicable, as set forth in the Act and any regulations or guidance documents promulgated thereunder, as amended from time to time, together with any similar standards of good laboratory practice as are required by any Regulatory Authority having jurisdiction over the applicable activity.

  • Discriminatory housing practice means an act that is unlawful under this chapter.

  • Good Industry Practices means the practices that would be adopted by, and the exercise of that degree of care, skill, diligence, prudence and foresight that reasonably would be expected from, a competent contractor in the international oil and gas industry experienced in performing work similar in nature, size, scope and complexity to the Work and under conditions comparable to those applicable to the Work, where such work is subject to, and such contractor is seeking to comply with, the standards and codes specified in the Contract or (to the extent that they are not so specified) such national or international standards and codes as are most applicable in the circumstances, and the applicable Law.

  • Practices means that the practice(s) seems like a logical approach to addressing a specific behavior which is becoming distinct, recognizable among Clients and clinicians in practice, or innovators in academia or policy makers; and at least one recognized expert, group of researchers or other credible individuals have endorsed the practice as worthy of attention based on outcomes; and finally, it produces specific outcomes.

  • GMP means the amount proposed by Contractor and accepted by Owner as the maximum cost to Owner for construction of the Project in accordance with this Agreement. The GMP includes Contractor’s Construction Phase Fee, the General Conditions Cost, the Cost of the Work, and Contractor’s Contingency amount.

  • Systems Engineering means preparing specifications, identifying and resolving interface problems, developing test requirements, evaluating test data, and supervising design.

  • Architect/Engineer (A/E means a person registered as an architect pursuant to Tex. Occ. Code Ann., Ch. 1051, as a landscape architect pursuant to Tex. Occ. Code Ann., Ch. 1052, a person licensed as a professional engineer pursuant Tex. Occ. Code Ann., Ch. 1001, and/or a firm employed by Owner or Design-Build Contractor to provide professional architectural or engineering services and to exercise overall responsibility for the design of a Project or a significant portion thereof, and to perform the contract administration responsibilities set forth in the Contract.

  • cGMP means current Good Manufacturing Practices as specified in the United States Code of Federal Regulations, ICH Guideline Q7A, or equivalent laws, rules, or regulations of an applicable Regulatory Authority at the time of manufacture.

  • Good Industry Practice means standards, practices, methods and procedures conforming to the Law and the degree of skill and care, diligence, prudence and foresight which would reasonably and ordinarily be expected from a skilled and experienced person or body engaged in a similar type of undertaking under the same or similar circumstances.

  • Prudent Operating Practice means (a) the applicable practices, methods and acts required by or consistent with applicable Laws and reliability criteria, and otherwise engaged in or approved by a significant portion of the electric utility industry during the relevant time period with respect to grid-interconnected, utility-scale generating facilities with integrated storage in the Western United States, or (b) any of the practices, methods and acts which, in light of the facts known at the time the decision was made, could have been expected to accomplish the desired result at a reasonable cost consistent with good business practices, reliability, safety and expedition. Prudent Operating Practice is not intended to be limited to the optimum practice, method or act to the exclusion of all others, but rather to acceptable practices, methods or acts generally accepted in the industry with respect to grid-interconnected, utility-scale generating facilities with integrated storage in the Western United States. Prudent Operating Practice includes compliance with applicable Laws, applicable reliability criteria, and the criteria, rules and standards promulgated in the National Electric Safety Code and the National Electrical Code, as they may be amended or superseded from time to time, including the criteria, rules and standards of any successor organizations.

  • Standard Operating Procedures or “SOP” means the procedures as specified in the Annexes or Attachments to the relevant Schedules;

  • Engineering Reports has the meaning assigned such term in Section 2.07(c)(i).

  • Uniform Standards of Professional Appraisal Practice means the current standards of the appraisal profession, developed for appraisers and users of appraisal services by the Appraisal Standards Board of the Appraisal Foundation.

  • external engineering service means an engineering service situated outside the boundaries of a land area and that is necessary to serve the use and development of the land area;

  • Proper practices means those set out in The Practitioners’ Guide

  • Standards means the British or international standards, Authority's internal policies and procedures, Government codes of practice and guidance referred to in Framework Schedule 13 (Standards) together with any other specified policies or procedures identified in Framework Schedule 13 (Standards);

  • Engineering control means the use of substitution, isolation, ventilation, and equipment modification to reduce exposure to SARS-CoV-2 virus and COVID-19 disease related workplace hazards and job tasks.

  • Value Engineering (VE) means a discipline of engineering that studies the relative monetary values of various materials and construction techniques, including the intial cost, maintenance cost, energy usage, replacement cost, and life expectancy of the materials, equipment or systems under consideration.

  • Environmental and Social Standards or “ESSs” means, collectively: (i) “Environmental and Social Standard 1: Assessment and Management of Environmental and Social Risks and Impacts”; (ii) “Environmental and Social Standard 2: Labor and Working Conditions”; (iii) “Environmental and Social Standard 3: Resource Efficiency and Pollution Prevention and Management”;