Stump diameter definition

Stump diameter means the diameter of a tree measured at six inches above the ground surface level.
Stump diameter means diameter of a tree measured at six inches above ground surface level.
Stump diameter means the diameter of a tree stump remaining after cutting, felling, or destruction.

Examples of Stump diameter in a sentence

  • Stump diameter is measured outside bark at stump height in a horizontal plane and is the average of a measurement across the short axis through the true center of the stump and a second measurement at right angles to the short axis.

  • Stump diameter is measured outside bark at stump height in a horizontal and is the average of a measurement across the short axis through the true center of the stump and a second measurement at right angles to the short axis.

  • Stump diameter is measured outside bark on a horizontal plane at ground level on the high side of the stump.

  • These include: • Stump diameter (outside bark, ob)• Log diameter (ob) outside bark every 2 m• Log diameter (ob) at the commercial height (e.g. base of crown).

  • Stump diameter is always measured inside bark, and recorded to the nearest rad.

  • Stump diameter should be used to allow for measurement after the tree is cut and removed.

  • Within the cutting units shown below, listed species are designated for cutting when they (a) meet utilization standards and (b) are smaller than the stump diameter listed below and shown on the Sale Area Map: Stump diameter will be measured at 6 inches above ground level on the uphill side of the tree, outside of bark.

  • Plot records may include: (1) Residual tree spacing measured from residual tree to stump; (2) Residual tree stump diameter; (3) Stump diameter of cut trees; (4) General comments on selection of Residual Trees and work quality; and (4) Residual trees per acre damaged by PURCHASER.

  • Stump diameter was obtained from 53.87 cm (A16) to 61.67 cm (DC), but there was no significant difference among accessions.

  • The removal of tree stumps shall only be made by written authorization from the City of Mt. Pleasant.2. A list of stumps and locations of each, bearing the signature of an authorized representative of the City of Mt. Pleasant, must be in the possession of the contractor's crew before any stumps can be removed.3. Stump diameter will be determined by the diameter of the tree itself (roots not included).


More Definitions of Stump diameter

Stump diameter means the diameter of a tree stump remaining
Stump diameter means the diameter of a tree stump remaining or the diameter of the tree at four and one-half feet from the ground if the stump remaining after harvest is greater than four and one-half feet high.
Stump diameter means stump diameter of a tree, which is measured at 6 inch above ground surface level.
Stump diameter means stump diameter of a tree, which is measured at six inches above ground surface level.
Stump diameter means the diameter of a tree measured at six

Related to Stump diameter

  • Diameter means the diameter of the stem of a tree measured outside the bark at a specified point of measurement.

  • Diameter at breast height (dbh) means the diameter of a tree at 4 1/2 feet above the ground measured from the uphill side.

  • Drum means any cylindrical metal shipping container of 13 to 110 gallon capacity.

  • Tare Weight means the weight of an empty shipping container, excluding all materials used for wrapping, cushioning, banding, waterproofing, packaging, blocking and bracing articles within the exterior container.

  • high voltage means the classification of an electric component or circuit, if its working voltage is > 60 V and ≤ 1500 V DC or > 30 V and ≤ 1000 V AC root mean square (rms).

  • Pump spray means a packaging system in which the product ingredients within the container are not under pressure and in which the product is expelled only while a pumping action is applied to a button, trigger or other actuator.

  • Density means the permitted number of dwelling units per

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • PNode has the meaning set forth in the CAISO Tariff.

  • Moderator means, in connection with this DPA, a verified adult affiliated with and authorized by the Educational Institution to moderate a Student Account or a Classroom, as permitted by the Service.

  • tons means the gross tonnage calculated in accordance with the tonnage measurement regulations contained in Annex I of the International Convention on Tonnage Measurement of Ships, 1969; the word “tonnage” shall be construed accordingly.

  • Pile means any non-containerized accumulation of solid, nonflowing hazardous waste that is used for treatment or storage and that is not a containment building.

  • Grab sample means an individual sample collected in less than 15 minutes in conjunction with an instantaneous flow measurement.

  • High voltage bus means the electrical circuit, including the coupling system for charging the REESS that operates on a high voltage.

  • High global warming potential hydrofluorocarbons means any hydrofluorocarbons in a particular end use for which EPA’s Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR Part 82 subpart G with supplemental tables of alternatives available at (http://www.epa.gov/snap/).

  • Uppermost aquifer means the geologic formation nearest the natural ground surface that is an aquifer, as well as lower aquifers that are hydraulically interconnected with this aquifer within the facility's property boundary.

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Feed means feed as defined in point (4) of Article 3 of Regulation (EC) No 178/2002;

  • Hood means a respiratory inlet covering that completely covers the head and neck and may also cover portions of the shoulders and torso.

  • Biomass means the biodegradable fraction of products, waste and residues from biological origin from agriculture (including vegetal and animal substances), forestry and related industries including fisheries and aquaculture, as well as the biodegradable fraction of industrial and municipal waste;

  • Geothermal fluid means water in any form at temperatures greater than 120

  • Ash means all species of the genus Fraxinus.

  • Small quantity generator means a generator who generates less than 1000 kg of hazardous waste in a calendar month.