Submerged Fill Line definition

Submerged Fill Line means any discharge pipe or nozzle designed to be within six (6) inches of the bottom of the tank and submerged at all times.
Sample 1Sample 2Sample 3
Submerged Fill Line means a pipe, tube, fitting or other hardware for loading liquids into a tank with either a discharge opening flush with the tank bottom; or with a discharge opening below the lowest normal operating drawoff level or that level determined by a liquid depth two and one half times the fill line diameter when measured in the main portion of the tank, but not in sumps or similar protrusions.
Sample 1Sample 2Sample 3
Submerged Fill Line means any discharge pipe or nozzle that meets either of the following conditions:
Sample 1Sample 2

More Definitions of Submerged Fill Line

Submerged Fill Line means any discharge pipe or nozzle which meets either of the following conditions:
Sample 1Sample 2
Submerged Fill Line means any discharge pipe or nozzle designed to be within 6 inches of the bottom of the tank and submerged at all times. which meet either of the following conditions:
Sample 1
Submerged Fill Line means any discharge pipe or nozzle which meets either of the following condi- tions:
Sample 1

Related to Submerged Fill Line

  • Submerged lands means those lands which are inundated by water on a seasonal or more frequent basis.

  • Pump spray means a packaging system in which the product ingredients within the container are not under pressure and in which the product is expelled only while a pumping action is applied to a button, trigger or other actuator.

  • Charcoal lighter material means any combustible material designed to be applied on, incorporated in, added to, or used with charcoal to enhance ignition. “Charcoal Lighter Material” does not include any of the following: (A) electrical starters and probes, (B) metallic cylinders using paper tinder, (C) natural gas,

  • HEPA filter means high-efficiency particulate air filters that are rated to achieve a minimum initial particle-removal efficiency of 99.97 per cent using ASTM F 1471– 93 or equivalent standard;

  • Contributory drainage area means the area from which stormwater runoff drains to a stormwater management measure, not including the area of the stormwater management measure itself.

  • Power plant means a facility for the generation of

  • Drip irrigation means any non-spray low volume irrigation system utilizing emission devices with a flow rate measured in gallons per hour. Low volume irrigation systems are specifically designed to apply small volumes of water slowly at or near the root zone of plants.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Modular building manufacturer means a person or corporation who owns or operates a

  • Mist spray adhesive means any aerosol which is not a special purpose spray adhesive and which delivers a particle or mist spray, resulting in the formation of fine, discrete particles that yield a generally uniform and smooth application of adhesive to the substrate.

  • Pervious surface means an area that releases as runoff a small portion of the precipitation that falls on it. Lawns, gardens, parks, forests or other similar vegetated areas are examples of surfaces that typically are pervious.

  • wind turbine generator or “WTG” means a structure comprising a tower, rotor with three blades connected at the hub, nacelle and ancillary electrical and other equipment which may include J-tube(s), transition piece, access and rest platforms, access ladders, boat access systems, corrosion protection systems, fenders and maintenance equipment, helicopter landing facilities and other associated equipment, fixed to a foundation;