Surface water diversion definition

Surface water diversion means a natural or constructed drainage feature used to divert surface water, collect runoff, and direct it to an effective outlet. Surface water diversions include waterways, berms, swales, and ditches. Surface water diversions are a type of artificial drainage.
Sample 1Sample 2Sample 3
Surface water diversion means a natural or constructed drainage feature used to divert surface
Sample 1Sample 2Sample 3

Examples of Surface water diversion in a sentence

  • Surface water diversion and erosion and ponding prevention would be included as an integral part of the topsoil grading design.

  • Type ApplicationCIC Notice involving Bancshares of Gleason, Inc., Gleason, Tennessee, by Alan Owen, Robert Owen and Eric Owen, as a control group, to retain 18.13 percent.CIC Notice involving St. Peters Bancshares, Inc., St. Peter, Illinois, by Raymond and Ruth Schnake to retain 16.9 percent.

  • Successful grant Applicants are required to comply with several laws regarding water supply and management including: conservation and/or water efficiency legislation such as Senate Bill (SB) X7-7 (Water conservation), Assembly Bill (AB)1420 (Water conservation measures), SB X7-6 (Groundwater monitoring), AB 1404 (Surface water diversion reporting), Sustainable Groundwater Management Act (SGMA), and other applicable state statutes or regulations.

  • Surface water diversion and diking structures were constructed to prevent surface drainage into mine shafts, subsidence areas, and open boreholes.

  • There are four main categories of SWMP monitoring points, as described in the following sections:• Surface water diversion and culvert monitoring;• Surface water flow monitoring;• Sediment pond monitoring; and• Discharge water quality monitoring.

  • Surface water diversion ditches shall be constructed above the disturbed area to intercept water and to divert surface water runoff around the site; and 3.2.b.11.

  • Surface water diversion and diking structures were constructed to prevent surface water from draining into certain mine shafts, subsidence areas, and open boreholes.

  • Surface water diversion structure locations and dimension are listed in the Table 2-6 and are described in the following sections.Table 2-6: Stormwater Diversion Structures Millennium Catchment Area and the Trout Creek DiversionMMC has developed a permanent catchment area within the ephemeral Trout Creek drainage in Township 32 North, Range 43 East, Section 31, approximately one mile below the lower extent of perennial flow in Trout Creek.

  • Surface water diversion could be alternatively achieved by placement of a diversion drain across the top of the southern site embankment.

  • Surface water diversion ditches will divert surface water from the small catchment area upslope of the DSTFs. The DSTF slope design geometry is 3H:1V to suit typical stability and closure requirements.

Related to Surface water diversion

  • Surface water means all water which is open to the atmosphere and subject to surface runoff.

  • Stormwater management planning area means the geographic area for which a stormwater management planning agency is authorized to prepare stormwater management plans, or a specific portion of that area identified in a stormwater management plan prepared by that agency.

  • Drainage area means a geographic area within which stormwater, sediments, or dissolved materials drain to a particular receiving waterbody or to a particular point along a receiving waterbody.