Suspension Limit definition

Suspension Limit the meaning set forth in Section 4.4.
Sample 1Sample 2Sample 3

Examples of Suspension Limit in a sentence

  • Should the Contractor elect to perform more than two tests per lot, the Suspension Limits shall be adjusted by multiplying the Suspension Limit by 1.18 for n = 3 and by 1.27 for n = 4.

  • When the test results exceed either applicable Suspension Limit, halt production until the problem is solved.

  • Should the Contractor elect to perform more than two tests per lot, the Suspension Limits shall be adjusted by multiplying the Suspension Limit by 1.18 for n = 3 and by 1.27 for n = 4.c. Corrective action.

  • When the Suspension Limit is exceeded for individual values or running average values, the Government Engineer has the option to require removal and replacement of the material represented by the samples or to leave in place and base acceptance on mixture volumetric properties and in place density.

  • If any of the weighted average Coal qualities fail to conform to the Applicable Contracted Period Suspension Limit specifications set forth in a Confirmation, then Buyer may suspend the receipt of future Shipments (except Shipments already loaded or in transit to Buyer) under such Confirmation.

  • For purposes of the immediately preceding sentence, the number of days to be counted against the Suspension Limit as a result of the imposition of a Lock-up Period shall be deemed to be two-thirds (2/3) of the actual number of days included in the Lock-up Period, but in no event more than 60 days.

  • Should the Contractor elect to perform more than two tests per lot, the Suspension Limits shall be adjusted by multiplying the Suspension Limit by 1.18 for n = 3 and by 1.27 for n = 4.Control Chart Limits Based on Range (n = 2)c.

  • Should the Contractor elect to perform more than two tests per lot, the Suspension Limits shall be adjusted by multiplying the Suspension Limit by 1.18 for n = 3 and by 1.27 for n = 4.Control Chart Limits Based on Range c.

  • As received basis, in accordance with applicable ASTM standards for each Shipment, as follows: Applicable Contracted Period: Applicable Contracted Period Suspension Limit: Shipment Rejection Limit: Heating Value (Btu/lb.): minimum minimum SO2 (lbs.

  • However, this proposal for a hypermedia roadmap is not very sophisticated, since it uses keywords to generalize themes and topics that sometimes correspond to very specific thematic areas.The Ecuadorian media outlet GK stood out for its short-form content accompanied by images whose sizes end up im- pacting on usability and the interaction between users andcontent (Figure 7).

Related to Suspension Limit

  • Extension limitation means (a) the lesser of 5% or the

  • Emission limitation means a requirement established by the Board, the director or the Administrator, EPA, which limits the quantity, rate or concentration of emission of air pollutants on a continuous emission reduction including any requirement relating to the operation or maintenance of a source to assure continuous emission reduction (Section 302(k)).

  • emission limit value means the mass, expressed in terms of certain specific parameters, concentration and/or level of an emission, which may not be exceeded during one or more periods of time;

  • Possession limit as used in s. NR 19.275, means the maximum number of a turtle species or group of turtle species which may be possessed by a person at any time.

  • Deduction Limitation means the following described limitation on a benefit that may otherwise be distributable pursuant to the provisions of this Plan. Except as otherwise provided, this limitation shall be applied to all distributions that are “subject to the Deduction Limitation” under this Plan. If an Employer determines in good faith prior to a Change in Control that there is a reasonable likelihood that any compensation paid to a Participant for a taxable year of the Employer would not be deductible by the Employer solely by reason of the limitation under Code Section 162(m), then to the extent deemed necessary by the Employer to ensure that the entire amount of any distribution to the Participant pursuant to this Plan prior to the Change in Control is deductible, the Employer may defer all or any portion of a distribution under this Plan. Any amounts deferred pursuant to this limitation shall continue to be credited/debited with additional amounts in accordance with Section 3.8, even if such amount is being paid out in installments. The amounts so deferred and amounts credited thereon shall be distributed to the Participant or the Participant’s Beneficiary (in the event of the Participant’s death) at the earliest possible date, as determined by the Employer in good faith, on which the deductibility of compensation paid or payable to the Participant for the taxable year of the Employer during which the distribution is made will not be limited by Section 162(m). Notwithstanding the foregoing, the Committee shall interpret this Section in a manner that is consistent with Code Section 409A and the regulations thereunder, including without limitation guidance issued in connection with that Section.

  • Compensation Limit means the compensation limit of Section 401(a)(17) of the Code, as adjusted under Section 401(a)(17)(B) of the Code for increases in the cost of living.

  • S&P Exposure Period means the maximum period of time following a Valuation Date, including the Valuation Date and the AMPS Basic Maintenance Cure Date, that the Corporation has under these Articles Supplementary to cure any failure to maintain, as of such Valuation Date, the Discounted Value for its portfolio at least equal to the AMPS Basic Maintenance Amount (as described in paragraph 7(a) of these Articles Supplementary).

  • Moody’s Exposure Period means the period commencing on a given Valuation Date and ending 49 days thereafter.

  • Leverage Increase Period has the meaning specified in Section 7.11(a).

  • Required Availability means Excess Availability and unrestricted cash and Cash Equivalents in an amount of not less than $5,000,000.

  • Maximum Availability means, as of any date of determination, the difference of (i) the Facility Amount minus (ii) the balance of all unfunded Advances approved but not yet funded minus (iii) the Aggregate Unfunded Amount plus (iv) all amounts on deposit in the Unfunded Exposure Account, each as of such date of determination.

  • Maximum Limit means that number of issued Shares representing 10% of the total number of issued Shares as at the date of the passing of this Resolution (excluding any Shares which are held as treasury shares as at that date); and

  • Extension Minimum Condition means a condition to consummating any Extension that a minimum amount (to be determined and specified in the relevant Extension Request, in the Borrower’s sole discretion) of any or all applicable Classes be submitted for Extension.

  • Concentration Limit means at any time for any Obligor, the product of (i) such Obligor’s Specified Concentration Percentage, times (ii) the aggregate Unpaid Balance of the Eligible Receivables included in the Receivables Pool at the time of determination.

  • Excess Availability means, as of any date of determination, the amount equal to Availability minus the aggregate amount, if any, of all trade payables of Borrower and its Subsidiaries aged in excess of historical levels with respect thereto and all book overdrafts of Borrower and its Subsidiaries in excess of historical practices with respect thereto, in each case as determined by Agent in its Permitted Discretion.

  • Average Excess Availability means, with respect to any period, the sum of the aggregate amount of Excess Availability for each Business Day in such period (calculated as of the end of each respective Business Day) divided by the number of Business Days in such period.

  • Maximum Available Commitment means, subject to the proviso contained in the third sentence of Section 2.02(a), at any time of determination, (a) the Maximum Commitment at such time less (b) the aggregate amount of each Interest Advance outstanding at such time; provided that following a Provider Advance or a Final Advance, the Maximum Available Commitment shall be zero.

  • Maximum Credit means, at any time, the lesser of (i) the Revolving Credit Commitments in effect at such time and (ii) the Borrowing Base at such time.

  • Undrawn Availability at a particular date shall mean an amount equal to (a) the lesser of (i) the Formula Amount, or (ii) the Maximum Revolving Advance Amount, minus the Maximum Undrawn Amount of all Letters of Credit, minus (b) the sum of (i) the outstanding amount of Revolving Advances, plus (ii) amounts due and owing to any Borrower’s trade creditors which are outstanding sixty (60) days or more past the due date thereof.

  • Revolving Availability Period means the period from and including the Effective Date to but excluding the earlier of the Revolving Maturity Date and the date of termination of the Revolving Commitments.

  • Final Availability Date means the earlier of the Revolving Termination Date and one (1) Business Day prior to the date specified in clause (a) of the definition of Revolving Termination Date.

  • Maximum daily discharge limitation means the highest allowable “daily discharge.”

  • Quarterly Average Excess Availability means, at any time, the daily average of the Excess Availability for the immediately preceding fiscal quarter as calculated by Agent in good faith.

  • Maximum Available Amount means, on any date of determination, an amount equal to the lesser of:

  • Availability Block means $15,000,000.

  • Maximum Revolver Amount means $100,000,000, decreased by the amount of reductions in the Revolver Commitments made in accordance with Section 2.4(c) of the Agreement.