Synchronous DER definition

Synchronous DER means a DER Unit in which, under all steady state conditions, the rotor rotates at a mechanical speed equal to the electrical frequency of the National Electricity Transmission System divided by the number of pole pairs of the Generating Unit;

Examples of Synchronous DER in a sentence

  • Table 2 – Synchronous DER Response (shall trip) to Abnormal VoltagesShall Trip – Synchronous DERShall Trip FunctionDefault Setting Table 3 – Inverter DER Response (shall trip) to Abnormal VoltagesShall Trip – Inverter DERShall Trip FunctionDefault Setting No advanced voltage ride through is allowed.

  • DER System (kVA AC)Table 1 – Synchronous DER Response (shall trip) to Abnormal Voltages *Systems shall be capable of being adjusted within the range of 0.95 to 1.0 PF During normal operation of the DER system the power factor shall never be below0.90 at the RPA.

  • Synchronous DER should be modeled using the gentpj model with Kis = 0.

  • The Table 2 and Table 3 list the maximum clearing time for the DER system upon the occurrence of abnormal voltage levels.Table 2 – Synchronous DER Response (shall trip) to Abnormal VoltagesShall Trip – Synchronous DERShall Trip FunctionDefault Setting Table 3 – Inverter DER Response (shall trip) to Abnormal VoltagesShall Trip – Inverter DERShall Trip FunctionDefault Setting No voltage ride through is allowed.

  • Synchronous DER shall be able to meet the requirements of IEEE 1547-2018 Abnormal Performance Category I for response to abnormal conditions.

  • All Synchronous DER shall trip for the abnormal frequency conditions below and clear within the specified clearing time, unless otherwise specified by Minnesota Power.

  • All Synchronous DER shall trip for the abnormal voltage conditions below and clear within the specified clearing time.

  • Proficiency rates went from 13.2% to 18.4% from fall to spring semester.

  • Table 1 – Synchronous DER Response (shall trip) to Abnormal Voltages *Systems shall be capable of being adjusted within the range of 0.95 to 1.0 PF During normal operation of the DER system the power factor shall never be below0.90 at the RPA.

  • Synchronous DER Models‌‌Small, synchronous DER connected at the distribution level can be modeled using standard synchronous machine models.

Related to Synchronous DER

  • Synchronous means existing or occurring at the same time.

  • Synchronous Optical Network (SONET) is an optical interface standard that allows inter-networking of transmission products from multiple vendors. The base rate is 51.84 Mbps (“OC-1/STS-1”) and higher rates are direct multiples of the base rate, up to 13.22 Gbps.

  • Synchronous Optical Network (SONET means the optical interface standard that allows inter-networking of transmission products from multiple vendors. The base rate is 51.84 Mbps (“OC 1/STS 1”) and higher rates are direct multiples of the base rate, up to 13.22 Gbps.

  • Synchronous interaction means a real-time interaction between a patient and a health care provider for telehealth located at a distant site.

  • Asynchronous store and forward means the transmission of a patient's medical information from an originating site to the health care provider for telehealth at a distant site without the presence of the patient.

  • Electric bicycle means a “class 1 electric bicycle”, a “class 2 electric bicycle”, or a “class 3 electric bicycle” as defined in this section. (ORC 4511.01(RRR))

  • Access Tandem Switch is a Switch used to connect End Office Switches to interexchange Carrier Switches. Qwest's Access Tandem Switches are also used to connect and switch traffic between and among Central Office Switches within the same LATA and may be used for the exchange of local traffic.

  • Network Rail means Network Rail Infrastructure Limited, a company registered in England under company number 02904587 and having its registered office at 0 Xxxxxxxxx Xxxxxx, Xxxxxx XX0 0XX;

  • Continuous emissions rate monitoring system or “CERMS” means the total equipment required for the determination and recording of the pollutant mass emissions rate (in terms of mass per unit of time).

  • Signaling System 7 (SS7 means a signaling protocol used by the CCS Network.

  • Continuous emissions monitoring system or “CEMS” means all of the equipment that may be required to meet the data acquisition and availability requirements of this chapter, to sample, to condition (if applicable), to analyze, and to provide a record of emissions on a continuous basis.

  • Continuous emissions monitoring system (CEMS means all of the equipment that may be required to meet the data acquisition and availability requirements of this section, to sample, condition (if applicable), analyze, and provide a record of emissions on a continuous basis.

  • Internet service means a service that enables users to access proprietary and other content,

  • Switched Access Detail Usage Data means a category 1101xx record as defined in the EMI iconectiv Practice BR 010-200-010.

  • NTSC means NSIC-Technical Services Centre

  • Voice over internet protocol service means any service that:

  • InterLATA Traffic describes Telecommunications between a point located in a Local Access and Transport Area ("LATA") and a point located outside such area.

  • Broadband Internet access service means a mass-market retail service by wire or radio that provides the capability to transmit data to and receive data from all or substantially all Internet endpoints, including any capabilities that are incidental to and enable the operation of the communications service, but excluding dial-up Internet access service. This term also encompasses any service that the State finds to be providing a functional equivalent of the service described in the previous sentence, or that is used to evade the protections set forth in this section.

  • Network Interface Device or "NID" is a Network Element (including all of its features, functions and capabilities) that includes any means of Interconnection of End User Customer premises wiring to Qwest's distribution plant, such as a cross connect device used for that purpose. "New Service Provider" means the Party to which an End User Customer switches its local Exchange Service or the Party to which an End User Customer is porting its telephone number(s).

  • Dosimetry processor means an individual or an organization that processes and evaluates individual monitoring devices in order to determine the radiation dose delivered to the monitoring devices.

  • Continuous emission monitoring system or "CEMS" means the equipment required under section 11 of this rule to sample, analyze, measure, and provide, by means of readings recorded at least once every fifteen (15) minutes, using an automated data acquisition and handling system (DAHS), a permanent record of nitrogen oxides emissions, stack gas volumetric flow rate, stack gas moisture content, and oxygen or carbon dioxide concentration, as applicable, in a manner consistent with 40 CFR 75*. The following systems are the principal types of continuous emission monitoring systems required under section 11 of this rule:

  • Module means specific portion of the Application Software designated as such in the Documentation made available to the Customer under the Notification Form.

  • Signaling System 7 (SS7) means a signaling protocol used by the CCS Network.

  • Digital Cross Connect System or "DCS" is a function which provides automated Cross Connection of Digital Signal Level 0 (DS0) or higher transmission bit rate digital channels within physical interface facilities. Types of DCS include but are not limited to DCS 1/0s, DCS 3/1s, and DCS 3/3s, where the nomenclature 1/0 denotes interfaces typically at the DS1 rate or greater with Cross Connection typically at the DS0 rate. This same nomenclature, at the appropriate rate substitution, extends to the other types of DCS specifically cited as 3/1 and 3/3. Types of DCS that cross connect Synchronous Transport Signal level 1 (STS-1 s) or other Synchronous Optical Network (SONET) signals (e.g., STS-3) are also DCS, although not denoted by this same type of nomenclature. DCS may provide the functionality of more than one of the aforementioned DCS types (e.g., DCS 3/3/1 which combines functionality of DCS 3/3 and DCS 3/1). For such DCS, the requirements will be, at least, the aggregation of requirements on the "component" DCS. In locations where automated Cross Connection capability does not exist, DCS will be defined as the combination of the functionality provided by a Digital Signal Cross Connect (DSX) or Light Guide Cross Connect (LGX) patch panels and D4 channel banks or other DS0 and above multiplexing equipment used to provide the function of a manual Cross Connection. Interconnection is between a DSX or LGX to a Switch, another Cross Connection, or other service platform device.

  • internet access service means a publicly available electronic communications service that provides access to the internet, and thereby connectivity to virtually all end points of the internet, irrespective of the network technology and terminal equipment used.

  • Internet Services means the Services provided to you by us using broadband technology to enable you to gain access to the Internet and certain other Services whether by a personal computer, television or other device;