tamper-proofing definition

tamper-proofing means the use of encryption technology to secure a document once an electronic signature is applied, and to secure the related audit trail. If a document is modified or tampered with, the technology would invalidate the document or otherwise flag the tampering.
Sample 1
tamper-proofing. Means of preventing the user from gaining easy access to the measuring mechanism of the device.
Sample 1
tamper-proofing. Means shall be provided to prevent tampering or unauthorized access:- for all non-automated sphygmomanometers, any adjustment or function that affects accuracy;- for mercury non-automated sphygmomanometers, the separation of reservoir and scale. EXAMPLE Requiring a tool for opening or seal breakage.It shall be clear to an operator if tampering or unauthorized access has occurred.
Sample 1

Examples of tamper-proofing in a sentence

  • Tamper proofing, immutability, Proof of provenance and traceability are supported by the highly secured and permission-based digital platform protecting valuable assets from threats of data tampering.

  • Tamper proofing and resistance: as mentioned before, a Xilinx and NSA collaboration brief [72] refers to a “security monitor” to enhance security properties from within the FPGA, which is certainly a step towards embedded tamper detection for the FPGA to function as a single-chip module.

  • For recommendations 9, 13, 15 and 16, the net impact on budgets cannot be determined in advance.

  • Finally, quarterly reporting can help ODOT’s RTCs and other technical experts to determine whether an agency may need additional technical assistance.

  • Tamper proofing and resistance: as mentioned before, a Xilinx and NSA collaboration brief [74] refers to a “security monitor” to enhance security properties from within the FPGA, which is certainly a step towards embedded tamper detection for the FPGA to function as a single-chip module.

  • Tamper proofing and self destruction: Use of tamper proof packages for bio elec- tronic devices and execution of self destruction mode upon encountering a physical attack.

Related to tamper-proofing

  • Floodproofing means any combination of structural and nonstructural additions, changes, or adjustments to structures which reduce or eliminate flood damage to real estate or improved real property, water and sanitation facilities, structures, and their contents.

  • Identity proofing means a process or service by which a third person provides a notary public with a means to verify the identity of a remotely located individual by a review of personal information from public or private data sources.

  • Flood proofing means any combination of structural and non-structural additions, changes, or adjustments to structures which reduce or eliminate flood damage to real estate or improved real property, water and sanitary facilities, structures and their contents.

  • Soft drinks means nonalcoholic beverages that contain natural or artificial sweeteners. "Soft drinks" does not include beverages that contain milk or milk products, soy, rice, or similar milk substitutes, or that contains greater than fifty per cent vegetable or fruit juice by volume.

  • Waterproofer means a product designed and labeled exclusively to repel water from fabric or leather substrates. Waterproofer does not include fabric protectants.

  • Beam scattering foil means a thin piece of material (usually metallic) placed in the beam to scatter a beam of electrons in order to provide a more uniform electron distribution in the useful beam.

  • Tamper means to interfere with something improperly, meddle with it, make unwarranted

  • fire hydrant means a fire plug or fixed pillar fire hydrant;

  • spoil means excavated material which is unsuitable for use as material in the construction works or is material which is surplus to the requirements of the construction works;

  • Flashpoint means the minimum temperature at which a liquid gives off a vapor in sufficient concentration to ignite when tested as follows:

  • Tampering means the unauthorized connecting, disconnecting, or causing to be connected or disconnected, or in any other manner interfering with the operation of the Company’s meters, pipes, conduits, other equipment or attachments, or as otherwise provided by this Tariff (see Sections 6.6, 6.13, and 6.15).

  • Irrigation means application of water to land areas to supply the water needs of

  • Yard waste means leaves, grass clippings, yard and garden debris and brush, including clean woody vegetative material no greater than 6 inches in diameter. This term does not include stumps, roots or shrubs with intact root balls.

  • Alarm means to cause fear of danger of physical harm; and

  • Plastic means material which contains as an essential ingredient a high polymer such as polyethylene terephthalate, high density polyethylene, Vinyl, low density polyethylene, polypropylene, polystyrene resins, multi-materials like acrylonitrile butadiene styrene, polyphenylene oxide, polycarbonate, Polybutylene terephthalate;

  • Putrescible waste means a solid waste that contains organic matter capable of being decomposed by microorganisms so as to cause a malodor, gases, or other offensive conditions, or which is capable of providing food for birds and other vectors. Putrescible wastes may form a contaminated leachate from microbiological degradation, chemical processes, and physical processes. Putrescible waste includes, but is not limited to, garbage, offal, dead animals, general household waste, and commercial waste. All solid wastes which do not meet the definitions of inert or chemical wastes shall be considered putrescible wastes.

  • Wood waste means untreated wood and untreated wood products, including tree stumps (whole or chipped), trees, tree limbs (whole or chipped), bark, sawdust, chips, scraps, slabs, millings, and shavings.

  • Backsiphonage means the flow of water or other liquids, mixtures or substances into the potable water system from any source other than its intended source, caused by the reduction of pressure in the potable water system.

  • Caseworker means a PCSA, PCPA or PNA staff person who is responsible for provision of protective services or supportive services to the child and his parent, guardian, custodian or substitute caregiver.

  • Tableware means multi-use eating and drinking utensils.

  • Curbside “Curb” means that portion of the right-of-way adjacent to paved or traveled roadways, including the end of a driveway, curb line or alley line. Containers will be placed as close to the roadway as practicable without interfering with or endangering the movement of vehicles or pedestrians.

  • Pretreatment coating means a coating which contains no more than 12% solids by weight, and at least 0.5% acid by weight, is used to provide surface etching, and is applied directly to metal surfaces to provide corrosion resistance, adhesion, and ease of stripping.

  • Disinfection means a process which inactivates pathogenic organisms in water by chemical oxidants or equivalent agents.

  • ESD refers to “Educational Service District”.as defined in RCW 28A.310.010.

  • Solid insulator means the insulating coating of wiring harnesses, provided in order to cover and prevent the high voltage live parts from any direct contact.

  • Air dried coating means a coating that is dried by the use of air or forced warm air at temperatures up to 1940F (900C).