Test piece definition

Test piece means a sample or a finished product of glazing.
Sample 1Sample 2Sample 3
Test piece means a representative object of the final material that is used for the carrying out of testing in accordance with the procedures and methods for testing set out in Implementing Decision (EU) 2024/368;
Sample 1

Examples of Test piece in a sentence

  • Test piece support structures and electronic units designed to combine multiple shaker units into a complete shaker system capable of providing an effective combined force equal to or greater than 50 kN, measured 'bare table', and usable in vibration test systems specified in 15.B.1.a. Technical Note: Vibration test systems incorporating a digital controller are those systems, the functions of which are, partly or entirely, automatically controlled by stored and digitally coded electrical signals.

  • Test piece support structures and electronic units designed to combine multiple shaker units into a complete shaker system capable of providing an effective combined force of 50 kN or greater, measured “bare table”, which are usable for the systems specified in Item 1.B.6.a. Technical Note: In Item 1.B.6. “bare table” means a flat table, or surface, with no fixtures or fittings.

  • Test piece support structures and electronic units designed to combine multiple shaker units into a complete shaker system capable of providing an effective combined force of 50 kN or greater, measured ‘bare table’, which are usable for the systems specified in Item 1.B.6.a. Technical Note: In Item 1.B.6. ‘bare table’ means a flat table, or surface, with no fixtures or fittings.

  • Test piece support structures and electronic units designed to combine multiple shaker units in a system capable of providing an effective combined force equal to or greater than 50 kN, measured ‘bare table’, and usable in vibration systems specified in 2B116.a. Technical Note: In 2B116, ‘bare table’ means a flat table, or surface, with no fixture or fittings.

  • Test piece support structures and electronic units designed to combine multiple shaker units into a complete shaker system capable of providing an effective combined force of 50 kN or greater, measured ´bare table´, which are usable for the systems specified in Item 1.B.6.a. Technical Note: In Item 1.B.6. ´bare table´ means a flat table, or surface, with no fixtures or fittings.

  • Welders to whom the Tenderer proposes to deploy for the job will need to be Qualified for the Welding Procedure by making a Mock Test piece at NFL Vijaipur Site.

  • Fig.A.1 Test piece for welding repair procedure A test sample of minimum 30mm thickness is to be used.

  • Welders to whom the Tenderer proposes to deploy for the job will need to be Qualified for the Welding Procedure by making a Mock Test piece at NFL Vijaipur Site shall be in party’s scope.

  • Test piece support structures and electronic units designed to combine multiple shaker units into a complete shaker system capable of providing an effective combined force equal to or greater than 50 kN, measured “bare table”, and usable in vibration test systems specified in 15.B.1.a. Technical Note: Vibration test systems incorporating a digital controller are those systems, the functions of which are, partly or entirely, automatically controlled by stored and digitally coded electrical signals.

  • Rain penetration resistance, ISO5912 Test piece is the complete outer tent only.

Related to Test piece

  • Test Pass has the meaning stated in Section 3.4(a).

  • Test means such test as is prescribed by the particulars or considered necessary by the Inspecting Officer whether performed or made by the Inspecting Officer or any agency acting under the direction of the Inspecting Officer;

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • Test Date means, with respect to any Start Date, the last day of the most recent fiscal quarter of the Borrower ended immediately prior to such Start Date.

  • RDDS test Means one query sent to a particular “IP address” of one of the servers of one of the RDDS services. Queries shall be about existing objects in the Registry System and the responses must contain the corresponding information otherwise the query will be considered unanswered. Queries with an RTT 5 times higher than the corresponding SLR will be considered as unanswered. The possible results to an RDDS test are: a number in milliseconds corresponding to the RTT or undefined/unanswered.

  • Test cycle means a sequence of test points each with a defined speed and torque to be followed by the engine under steady state (WHSC) or transient operating conditions (WHTC).

  • DNS test Means one non-­‐recursive DNS query sent to a particular “IP address” (via UDP or TCP). If DNSSEC is offered in the queried DNS zone, for a query to be considered answered, the signatures must be positively verified against a corresponding DS record published in the parent zone or, if the parent is not signed, against a statically configured Trust Anchor. The answer to the query must contain the corresponding information from the Registry System, otherwise the query will be considered unanswered. A query with a “DNS resolution RTT” 5 times higher than the corresponding SLR, will be considered unanswered. The possible results to a DNS test are: a number in milliseconds corresponding to the “DNS resolution RTT” or, undefined/unanswered.

  • 2 Wire Analog Voice Grade Loop or “Analog 2W” provides an effective 2-wire channel with 2-wire interfaces at each end that is suitable for the transport of analog Voice Grade (nominal 300 to 3000 Hz) signals and loop-start signaling. This Loop type is more fully described in Verizon Technical Reference (TR)-72565, as revised from time-to-time. If “Customer-Specified Signaling” is requested, the Loop will operate with one of the following signaling types that may be specified when the Loop is ordered: loop-start, ground-start, loop- reverse-battery, and no signaling. Customer specified signaling is more fully described in Verizon TR-72570, as revised from time-to- time. Verizon will not build new facilities.

  • First Lien Net Leverage Ratio means, with respect to any Test Period, the ratio of (a) Consolidated First Lien Net Indebtedness as of the last day of such Test Period to (b) Consolidated EBITDA for such Test Period.

  • Test Period means, at any date of determination, the most recently completed four consecutive fiscal quarters of the Borrower ending on or prior to such date for which financial statements have been or are required to be delivered pursuant to Section 6.01(a) or (b).

  • Secured Net Leverage Ratio means, on any date, the ratio of (a) Consolidated Secured Net Debt as of such date to (b) Consolidated EBITDA for the Test Period as of such date.

  • Drug test means a test designed to detect the illegal use of a controlled substance.

  • Consolidated Senior Secured Net Leverage Ratio means, for any Measurement Period, the ratio of (a) Consolidated Senior Secured Net Debt for Borrowed Money to (b) Consolidated EBITDA, in each case for such period.

  • Consolidated First Lien Net Leverage Ratio means, with respect to any Test Period, the ratio of (a) Consolidated First Lien Net Debt as of the last day of such Test Period to (b) Consolidated EBITDA for such Test Period.

  • Critical Test Concentration or "(CTC)" means the specified effluent dilution at which the Permittee is to conduct a single-concentration Aquatic Toxicity Test.

  • Acceptance Test Document means a document, which defines procedures for testing the functioning of installed system. The document will be finalized with the contractor within 7 days of issuance of the Letter of Award.

  • Quarterly (1/Quarter) sampling frequency means the sampling shall be done in the months of March, June, August, and December, unless specifically identified otherwise in the Effluent Limitations and Monitoring Requirements table.

  • Screening Test means a drug or alcohol test which uses a method of analysis allowed by the Minnesota Drug and Alcohol Testing in the Workplace Act to be used for such purposes.

  • Consolidated Secured Net Leverage Ratio means, as of any date of determination, the ratio of (a) Consolidated Total Debt as of such date that is then secured by Liens on property or assets of the Company and its Restricted Subsidiaries as of any date of determination to (b) EBITDA of the Company and its Restricted Subsidiaries for the most recently ended Test Period on or prior to such date, in each case with such pro forma adjustments as are consistent with the pro forma adjustments set forth in the definition of “Interest Coverage Ratio.”