Thermal Cracking definition

Thermal Cracking means thermal cracking of distillate feedstocks. A thermal cracking unit may include a vacuum flasher. Units that combine visbreaking and thermal cracking of distillate generate a contribution for both processes based on the residue and the distillate throughput respectively.
Sample 1Sample 2Sample 3
Thermal Cracking means thermal cracking of distillate feedstocks. A thermal cracking unit may include a vacuum flasher. Units that combine visbreaking and thermal cracking of distillate generate a contribution for
Sample 1Sample 2Sample 3

Examples of Thermal Cracking in a sentence

  • Mathew Gear and others, ‘A Life Cycle Assessment Data Analysis Toolkit for the Design of Novel Processes – A Case Study for a Thermal Cracking Process for Mixed Plastic Waste’ (2018) 180 J Cleaner Production 735.

  • Shrinkage and Thermal Cracking of Fast Setting Hydraulic Cement Concrete Pavements in Palmdale, California.

  • The report shall contain the following minimum information: Gradation of RAP; amount and gradation of virgin aggregate or additional RAP, if any; recommended water content range as a percentage of dry RAP; optimum emulsion content as a percentage of dry RAP and corresponding density, air void level, and absorbed water; Marshall stability and retained stability at recommended moisture and emulsion contents, Raveling %, and Thermal Cracking initiation temperature.

  • The vendor claims Plasmarok™ significantly reduces the amount of residue requiring landfilling; from 60,000 tonnes of SRF, 450 tonnes of activated carbon from the gas scrubbers requires landfilling (over 99% reduction).[45] 2.2.2.2 Thermal Cracking Technology (Fast Pyrolysis)Graveson Energy Management (GEM) uses traditional petrochemical industry technology to convert MSW into clean synthetic gas.

  • Early Thermal Cracking The execution of concrete structures shall conform to the assumptions made in the design to control early thermal cracking and described in Appendix 17/1, unless otherwise agreed with the Employer’s Representative.

  • Thermal/catalytic Cracking of Hydrocarbons for the Production of Olefins: A State-of-the-Art Review I: Thermal Cracking Review.

  • Government policy is not supportive of a complete ban of coal mining, as is demanded by the Green Lobby, not even in a protected area.

  • We observe for all considered settings and for all three parameters that the mean estimate is very close to the true parameter value.

  • A Mechanics-Based Prediction Model for Thermal Cracking of Asphaltic Concrete Pavements.

  • The report shall contain the following minimum information: Gradation of RAP; amount and gradation of virgin aggregate or additional RAP, if any; recommended water content range as a percentage of dry RAP; optimum emulsion content as a percentage of dry RAP and corresponding density; air void percentage; absorbed water percentage; Marshall Stability and Retained Stability at design moisture and emulsion contents; Raveling percentage; and Thermal Cracking initiation temperature.

Related to Thermal Cracking

  • Geothermal fluid means water in any form at temperatures greater than 120

  • heat pump means a machine, a device or installation that transfers heat from natural surroundings such as air, water or ground to buildings or industrial applications by reversing the natural flow of heat such that it flows from a lower to a higher temperature. For reversible heat pumps, it may also move heat from the building to the natural surroundings;

  • X-ray high-voltage generator means a device which transforms electrical energy from the potential supplied by the x-ray control to the tube operating potential. The device may also include means for transforming alternating current to direct current, filament transformers for the x-ray tube(s), high-voltage switches, electrical protective devices, and other appropriate elements.

  • Blendstock means and includes any petroleum product component of motor fuel, such as naphtha, reformate, or toluene; or any oxygenate that can be blended for use in a motor fuel.

  • Gasification means the substoichiometric oxidation or steam reformation of a substance to produce a gaseous mixture containing two or more of the following: (i) oxides of carbon; (ii) methane; and (iii) hydrogen;

  • Customer-generator means a user of a net metering system.

  • Thermal efficiency means the useful electric energy output of a

  • Condensate means hydrocarbon liquid separated from natural gas which condenses due to changes in the temperature or pressure and remains liquid at standard conditions.

  • Mono-fuel gas vehicle means a mono fuel vehicle that primarily runs on LPG, NG/biomethane, or hydrogen but may also have a petrol system for emergency purposes or starting only, where the petrol tank does not contain more than 15 litres of petrol;

  • Biomass means the biodegradable fraction of products, waste and residues from biological origin from agriculture (including vegetal and animal substances), forestry and related industries including fisheries and aquaculture, as well as the biodegradable fraction of industrial and municipal waste;

  • Useful thermal energy means, with regard to a cogeneration unit, thermal energy that is:

  • Backpressure means a pressure (caused by a pump, elevated tank or piping, boiler, or other means) on the consumer's side of the service connection that is greater than the pressure provided by the public water system and which may cause backflow.

  • Blending means either the mixing of originally segregated Binned Grades within a Facility or during the outturn process.

  • Flex fuel vehicle means a vehicle with one fuel storage system that can run on different mixtures of two or more fuels.

  • CO2 means carbon dioxide.

  • Small quantity generator means a generator who generates less than 1000 kg of hazardous waste in a calendar month.

  • Mono-fuel vehicle means a vehicle that is designed to run primarily on one type of fuel.

  • Injection tool means a device used for controlled subsurface injection of radioactive tracer material.

  • Asphalt means a dark brown to black cement-like material (solid, semisolid, or liquid in consistency) in which the predominating constituents are bitumens which occur in nature as such or which are obtained as residue in refining petroleum.

  • Residue Gas means that portion of the Gas remaining after the extraction therefrom of Plant Products, Plant fuel require­ments, and Plant losses or uses.

  • Stockpile means material, including, but not limited to, surface overburden, rock, or lean ore, that in the process of mining and beneficiation or treatment has been removed from the earth and stored on the surface. Stockpile does not include materials that are being treated in the production of metallic products and the metallic product that has been produced by that operation.

  • Bulk gasoline plant means a gasoline storage and distribution facility with an average daily throughput of 20,000 gallons (76,000 liters) of gasoline or less on a 30-day rolling average.

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Geothermal energy means energy contained in heat that continuously flows outward from the earth that is used as the sole source of energy to produce electricity.

  • Process Gas means gas used for which altemate fuels, other than another gaseous fuel, are not technically feasible such as in applications requiring precise temperature controls and precise flame characteristics.

  • embedded generator means a generator who is not a market participant and whose generation facility is connected to a distribution system of a distributor, but does not include a generator who consumes more electricity than it generates;