Vapor Cleaning definition

Vapor Cleaning means an organic solvent cleaning process in which contaminants or water are cleaned and removed from surfaces by condensing hot solvent vapor on the colder pieces. This definition includes vapor degreasing and drying.

Examples of Vapor Cleaning in a sentence

  • Before using it, please read this manual completely.With this purchase of the Vapor Cleaning System you have acquired a highly effective cleaning system witch will provide you with efficient cleaning satisfaction.The Vapor Cleaning System uses the power of vapor heat to clean, and does not require the use of any chemicals or other additives.

  • Your Vapor Cleaning System uses only tap water, which, through heating, is converted into vapor.

  • Unplug the Vapor Cleaning System from outlet when not in use, or before servicing.

  • When using the Vapor Cleaning System, always use basic precaution, including the following:1.

Related to Vapor Cleaning

  • Semiconductor cleanrooms means the integrated systems, fixtures, piping, partitions, flooring,

  • Glass cleaner means a cleaning product designed primarily for cleaning surfaces made of glass. Glass cleaner does not include products designed solely for the purpose of cleaning optical materials used in eyeglasses, photographic equipment, scientific equipment and photocopying machines.

  • Dry cleaning fluid means any non-aqueous liquid product designed and labeled exclusively for use on: fabrics which are labeled "for dry clean only", such as clothing or drapery; or S-coded fabrics. Dry cleaning fluid includes, but is not limited to, those products used by commercial dry cleaners and commercial businesses that clean fabrics such as draperies at the customer's residence or work place. Dry cleaning fluid does not include spot remover or carpet and upholstery cleaner. For the purposes of this definition, S-coded fabric means an upholstery fabric designed to be cleaned only with water-free spot cleaning products as specified by the Joint Industry Fabric Standards Committee.

  • Slug loading means any pollutant, including oxygen demanding pollutants, released in a discharge at a flow rate and/or pollutant concentration as to cause interference in the POTW.

  • Easily cleanable means that surfaces are readily accessible and made of such materials and finish and so fabricated that residue may be effectively removed by normal cleaning methods.

  • High global warming potential hydrofluorocarbons means any hydrofluorocarbons in a particular end use for which EPA’s Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR Part 82 subpart G with supplemental tables of alternatives available at (http://www.epa.gov/snap/).

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Membrane filtration means a pressure or vacuum driven separation process in which particulate matter larger than one micrometer is rejected by an engineered barrier, primarily through a size exclusion mechanism, and which has a measurable removal efficiency of a target organism that can be verified through the application of a direct integrity test. This definition includes the common membrane technologies of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis.

  • Tank means an enclosed space which is formed by the permanent structure of a ship and which is designed for the carriage of liquid in bulk.

  • Ethanol blended gasoline means the same as defined in section 214A.1.

  • medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV < Un 44 kV. [SANS 1019]

  • Vapor tight means equipment that allows no loss of vapors. Compliance with vapor-tight requirements can be determined by checking to ensure that the concentration at a potential leak source is not equal to or greater than 100 percent of the lower explosive limit (LEL) when measured with a combustible gas detector, calibrated with propane, at a distance of 1 inch (2.54 cm) from the source.

  • Dusting aid means a product designed or labeled to assist in removing dust and other soils from floors and other surfaces without leaving a wax or silicone based coating. “Dusting Aid” does not include “Pressurized Gas Duster.”

  • Trash means solids not considered to be highly flammable or explosive including, but not limited to clothing, rags, leather, plastic, rubber, floor coverings, excelsior, tree leaves, yard trimmings and other similar materials.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which (1) a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and (2) while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Cleaning means the act of removing septage or other wastes from a wastewater treatment system component or grease/waste from a grease interceptor.

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Disinfection means a process which inactivates pathogenic organisms in water by chemical oxidants or equivalent agents.

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.

  • PAD means a Preauthorized Debit.

  • Disinfection profile means a summary of daily Giardia lamblia inactivation through the treatment plant. The procedure for developing a disinfection profile is contained in s. NR 810.34.

  • Tanks has the meaning set forth in Section 4.12(b).

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Tube means an x-ray tube, unless otherwise specified.

  • Infiltrative surface means designated interface where effluent moves from distribution media or a distribution product into treatment media or original soil. In standard trench or bed systems this will be the interface of the distribution media or product and in-situ soil. Two separate infiltrative surfaces will exist in a mound system and an unlined sand filter, one at the interface of the distribution media and fill sand, the other at the interface of the fill sand and in-situ soil.

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.