Vehicle Standards definition

Vehicle Standards means the Road Traffic (Vehicle Standards) Regulations 2002 and the Road Traffic (Vehicle Standards) Rules 2002;
Sample 1Sample 2Sample 3
Vehicle Standards means the standards for registration described in clause 1 of Schedule 2;
Sample 1
Vehicle Standards means the Road Traffic (Vehicle Standards) Rules 1999; "warning light" means a light that complies with the specifications in Part 7; "warning sign" means a sign that complies with Part 8;
Sample 1

Examples of Vehicle Standards in a sentence

  • Unless the contrary intention appears, words and expressions used in these regulations have the same meaning as they have in the Road Traffic (Vehicle Standards) Regulations 2002.[Regulation 47 amended in Gazette 22 Dec 2006 p.

  • Consideration of the Statutory Taxi and Private Hire Vehicle Standards 63.

  • It is your responsibility to apply for the Disclosure Barring Service (DBS) check, to pay for all entries to the Driver & Vehicle Standards Agency (DVSA) Approved Driving Instructor (ADI) qualifying exams and, upon successful completion, the fee required to be placed on the DVSA ADI register.

  • Listing No. Title Request Reaffirmed/Removed1Heavy-duty Engine and Vehicle Standards and Highway Diesel Fuel Sulfur Control, Requirements; Final Rule2005/26 (USA) adopted at the 13th session of AC.3 on10.03.05 (see TRANS/WP.29/1039, para.98) and notified under ref ECE/ TRAN/125/1 on 12.10.05Reaffirmed at the 29th session of AC.3 on 23.06.10 (see ECE/TRANS/ WP.29/1085, para.

  • A vehicle inspector or inspecting organisation must not certify a motor vehicle under Land Transport Rule: Vehicle Standards Compliance 2002 if they have reason to believe that the vehicle does not comply with this rule.

  • CARB adopted “Motor Vehicle Pollution Control Devices” (Vehicle Standards) (Cal.

  • Applicants will also need to provide evidence that the vehicle has been tested by Driver and Vehicle Standards Agency.

  • A vehicle inspector or inspecting organisation must not certify a motor vehicle under Land Transport Rule: Vehicle Standards Compliance 2002 if they have reason to believe that the vehicle does not comply with section 3 or 6 of this Rule.

  • The Statutory Taxi & Private Hire Vehicle Standards 2020 replace certain sections of the Best Practice Guidance 2010, and where there is a conflict between the two the Statutory Standards have been given precedence.

  • Therefore, Option 6: Mandatory standards under the Motor Vehicle Standards Act 1989 (C’th) (MVSA) is the recommended option.


More Definitions of Vehicle Standards

Vehicle Standards means the vehicle standards under the Road Traffic Act 1961. (2) For the purposes of this Part, a heavy vehicle is to be taken to have been involved in a relevant speeding offence if—
Sample 1
Vehicle Standards means the Road Traffic (Vehicle Standards) Rules 2002.(2) Unless the context requires otherwise, a reference in these regulations to the visibility of a light is a reference to itsRoad Traffic (Bicycles) Regulations 2002 r. 4 visibility, or its capacity to be visible, under normal atmospheric conditions, at any time between sunset and sunrise.4. ApplicationThese regulations apply to a bicycle if it is on a road.5. Adaptations for bicycle riders with physical disabilitiesIf the Director General believes that a person with a physical disability cannot safely ride a bicycle unless the bicycle is constructed, equipped or adapted in a particular manner, the Director General may, by notice in writing to the person with the disability and the owner of the bicycle, vary these regulations in so far as they apply to the bicycle while it is being ridden by the person with the disability, by requiring that the bicycle be constructed, equipped or adapted accordingly.6. BrakesA bicycle must be capable of being braked by either or both of the following means —
Sample 1

Related to Vehicle Standards

  • Applicable Standards means the requirements and guidelines of NERC, the Applicable Regional Entity, and the Control Area in which the Customer Facility is electrically located; the PJM Manuals; and Applicable Technical Requirements and Standards.

  • PCI Standards means the applicable Data Security Standards published by the PCI Security Standards Council.

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • Standards means the British or international standards, Authority's internal policies and procedures, Government codes of practice and guidance referred to in Framework Schedule 13 (Standards) together with any other specified policies or procedures identified in Framework Schedule 13 (Standards);

  • Service Standards means the set of Service Measures, Service Levels, conditions and Service Guarantee Payments as set out in Schedule 1;

  • Security Standards means the final rule implementing HIPAA’s Security Standards for the Protection of Electronic PHI, as amended.

  • Design Standards means the standards developed as a requirement of the Programmatic Agreement

  • Quality Standards means the quality standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent body, (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Contractor would reasonably and ordinarily be expected to comply with, and as may be further detailed in the Specification.

  • Air Standards Manager means the Manager, Human Toxicology and Air Standards Section, Standards Development Branch, or any other person who represents and carries out the duties of the Manager, Human Toxicology and Air Standards Section, Standards Development Branch, as those duties relate to the conditions of this Certificate.

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • Technical Standards means the technical standards set out in paragraph 2.4 of the Order Form;

  • Service Level Standards has the meaning ascribed thereto in Section 2.1 hereof.

  • Codes and Standards means all the applicable codes and standards as indicated in the Technical Specification.

  • Servicing Standards As defined in Section 3.01(a).

  • Specifications and Standards means the specifications and standards relating to the quality, quantity, capacity and other requirements for the Project Highway, as set forth in Schedule-D, and any modifications thereof, or additions thereto, as included in the design and engineering for the Project Highway submitted by the Contractor to, and expressly approved by, the Authority;

  • PREVENTIVE CARE SERVICES means covered healthcare services performed to prevent the occurrence of disease as defined by the Affordable Care Act (ACA). See Preventive Care and Early Detection Services in Section 3. PRIMARY CARE PROVIDER (PCP) means, for the purpose of this plan, professional providers that are family practitioners, internists, and pediatricians. For the purpose of this plan, gynecologists, obstetricians, nurse practitioners, and physician assistants may be credentialed as PCPs. To find a PCP or check that your provider is a PCP, please use the “Find a Doctor” tool on our website or call Customer Service.

  • Municipal Systems Act means the Local Government: Municipal Systems Act, 2000 (Act No. 32 of 2000);

  • Clean air standards, as used in this clause means:

  • NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.

  • safety standard means the Code of Practice for the Wiring of Premises SANS 10142-1 incorporated in the Regulations;

  • Pretreatment standards means any standards of performance or other requirements imposed by

  • Centers for Medicare and Medicaid Services or “CMS” means the federal office under the Secretary of the United States Department of Health and Human Services, responsible for the Medicare and Medicaid programs.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Privacy Standards means the standards of the privacy of individually identifiable health information, as pursuant to HIPAA.

  • Performance Standards or “PS” shall mean the cleanup levels and other measures of achievement of the remedial action objectives, as set forth in the ROD.