Vehicle width definition

Vehicle width means the distance between two planes parallel to the longitudinal median plane (of the vehicle) and touching the vehicle on either side of the said plane but excluding the external devices for indirect vision, side marker lamps, tyre pressure indicators, direction indicator lamps, position lamps, flexible mud-guards and the deflected part of the tyre side-walls immediately above the point of contact with the ground.

Vehicle width means a dimension which is measured according to ISO standard 612-1978, term No. 6.2. In addition to the provisions of that standard, when measuring the vehicle structural width the following devices shall not be taken into account:

Vehicle width means the distance between two planes parallel to the longitudinal median plane (of the vehicle) and touching the vehicle on either side of the said plane but excluding the rear-view mirrors, side marker lamps, tyre pressure indicators, direction indicator lamps, position lamps, flexible mud-guards and the deflected part of the tyre side-walls immediately above the point of contact with the ground.

Examples of Vehicle width in a sentence

• Vehicle width limits.Unless otherwise provided in this Code section or exempted in Code Section 32-6-25 or so authorized by a permit issued pursuant to Code Section 32-6-28, no vehicle shall exceed a total outside width, including any load thereon, of 102 inches, exclusive of mirrors and accessories attached thereto, when operated on any street, road, or highway.(Chgd.

• Vehicle width may be tempo- rarily extended in order to qualify for a permit under this section.

• Vehicle lengths: 6046 mm 6246 mm 6946 mm Vehicle width with outside mirrors: 2675 mm Max.

• The House of Lords, upholding the plaintiff's appeal, unanimously held that the judgment in X and Others v.

• Vehicle width may be temporarily extended in order to qualify for a permit under this section.

• Vehicle width can also be varied separately from length, affecting narrow lane operation.

• Vehicle must be within the weight and size rating.• Maximum vehicle dimensions and weight: All MachinesSpace #LengthWidthHeightWeight (lbs)1-416’-6”8’-0”6’-3”60005-816’-6”7’-4”6’-3”60009-1216’-6”7’-2”6’-3”600013-1716’-6”7’-6”6’-7”6000 • Vehicle width listed is maximum width when parked on the center of the platform.

• Vehicle width limitDifferences in norms between the EU and Korea, with respect to vehicle width, act as a barrier for EU exporters wishing to export to Korea.

• Vehicle weight and dimension standard: ♦ Brake efficiency ± 50 per cent; ♦ Side slip ± 5 m/km; ♦ Exhaust emission/smoke test 50 per cent (Opacity or Bosch Unit) or 50 HSU (hartridge smoke unit); ♦ Vehicle length maximum = 12.2 m (rigid vehicles) or 16.0 m (articulated vehicles); ♦ Vehicle width maximum = 2.5 m; ♦ Vehicle height maximum = 4.2 m; ♦ Vehicle rear overhang maximum = (50 to 60 per cent) wheelbase.

• The revenues for the six-month period ended June 30, 2017 were $1,148,541 as compared to $530,442 in 2016 with the increase of $618,099 reflecting zinc metal royalties of $198,808 (2016 - $Nil) and net option income of $949,733 in the current year as compared to $530,442 in 2016.

More Definitions of Vehicle width

Vehicle width means the distance between the nearside and offside vehicle planes.

Vehicle width means the vehicle dimension in accordance with Table II of Appendix 1 of Annex I to Regulation (EU) 1230/2012. Deviating from these provisions and not to be considered are removable load carrier devices, non- removable coupling devices and any other non-removable exterior parts which do not affect the usable space for passengers.

Vehicle width means a dimension which is measured according to ISO standard 612-1978, term No. 6.2. In addition to the provisions of that standard, when measuring the vehicle structural width the following devices shall not be taken into account:- customs sealing devices and their protection;- devices for securing the tarpaulin and their protection;- tyre failure tell-tale devices;- protruding flexible parts of a spray-suppression system;- lighting equipment.2.3. "Noise reduction system" means a complete set of components necessary for limiting the noise made by a motor vehicle and its exhaust;2.4. "Noise reduction systems of different types" means noise reduction systems which differ in such essential respects as:2.4.1. That their components as specified in paragraph 4.1., bear different trade names or marks;2.4.2. That the characteristics of the materials constituting a component are different or that the components differ in shape or size, a change in the plating procedure (galvanization, aluminium coating, etc.) is not deemed to produce a difference of type;2.4.3. That the operating principles of at least one component are different; 2.4.4. That their components are assembled differently;2.4.5. That the number of the intake and/or exhaust silencers is different.2.5. "Noise reduction system component" means one of the individual constituent parts whose assembly constitutes the noise reduction system.These components are, in particular: the exhaust pipings, the expansion chamber(s), the silencer(s) proper.2.5.1. The air filter is considered as a component only if its presence is essential to ensure observance of the prescribed sound-level limits.2.5.2. Manifolds are not considered components of the noise reduction system.2.6. "Maximum mass" means the technically permissible maximum mass declared by the vehicle manufacturer (this mass may be greater than the maximum mass authorized by the national administration).2.78. "Rated engine maximum net power" Pn means the engine power expressed in kW (ECE) and measured by the ECE method pursuant to Regulation No. 85.

Vehicle width means a dimension which is measured according to ISO standard 612-1978, term No 6.2. In addition to the provisions of that standard, when measuring the vehicle structural width the following devices shall not be taken into account:

Vehicle width means the distance between nearside plane and offside plane.

Vehicle width means the distance between nearside plane and offside plane. OICA – 21/01/2020: