Watershed analysis definition

Watershed analysis means, for a given WAU, the assessment completed under WAC 222-22-050 or 222-22- 060 together with the prescriptions selected under WAC 222- 22-070 and shall include assessments completed under WAC 222-22-050 where there are no areas of resource sensitivity.
Sample 1Sample 2Sample 3
Watershed analysis means, for a given WAU, the resource assessment completed under WAC 222-22-050 or 222-22-060 together with the prescriptions selected under WAC 222-22-080 and shall include resource assessments completed under WAC 222-22-050 where there are no areas of resource sensitivity and the ongoing reviews and reanalyses completed under WAC 222-22-090. "Weed" is any plant which tends to overgrow or choke out more desirable vegetation.
Sample 1Sample 2Sample 3
Watershed analysis means, for a given WAU, the assessment completed under WAC 222-22-050 or 222-22-060 together with the prescriptions selected under WAC 222-22-070 and shall include
Sample 1Sample 2

Examples of Watershed analysis in a sentence

  • Watershed analysis for the development of salmonid conservation and recovery plans within Pierce County: completion report.

  • Watershed analysis of drainage area and slope found that Rattlesnake Gulch has the largest drainage area and sediment contribution potential of 18 tributaries evaluated in Swale Canyon.

  • Watershed analysis for Federal Emergency Management Agency flood mapping.TEACHING (S17 = previously taught 2017 Spring, etc.; all courses at Univ.

  • The Bozeman Municipal Watershed analysis area is a landscape dominated by steep canyons and timbered slopes.

  • Watershed Analysis• Watershed analysis is completed on all MRC watershed analysis units (WAU).• The analysis includes assessments of:o Mass wasting inventory and map unitso Road erosion and erosion risko Stream channel conditiono Riparian function and conditiono Fish habitat conditiono Potential salmonid distribution and habitato Potential amphibian distribution and habitatWatersheds are a fundamental unit of ecosystems that can be used to evaluate cumulative impacts on fish and other aquatic resources.

  • Watershed analysis will identify critical hillslope, riparian, and channel processes that must be evaluated in order to delineate Riparian Reserves that assure protection of riparian and aquatic functions.

  • Watershed analysis and planning may include encouraging local and state efforts to minimize destruction / degradation of wetlands, restore and maintain the ecological health of watersheds, and encourage the restoration of native species.

  • Watershed analysis – We used MODIS to characterize phenological changes and ecosystem productivity at a spatial resolution of 250x250m, which has the ability to collect bi-weekly or better images during the course of our study.

  • Watershed analysis in Washington State includes an assessment of timber harvest-induced changes in rain-on-snow generated peak flows and potential impacts to fish habitat, water quality and public capital improvements.

  • Watershed analysis, riparian management and aquatic monitoring work in tandem and have an interdependent relationship.


More Definitions of Watershed analysis

Watershed analysis means, for a given WAU, the assessment completed under WAC 222-22-050 or 222-22-060 together with the
Sample 1Sample 2
Watershed analysis means, for a given WAU, the resource assessment completed under WAC
Sample 1
Watershed analysis means that process and report described
Sample 1

Related to Watershed analysis

  • Forensic analysis means the practice of gathering, retaining, and analyzing computer-related data for investigative purposes in a manner that maintains the integrity of the data.

  • Market Analysis means a technique used to identify market characteristics for specific goods or services “National Treasury” has the meaning assigned to it in section 1 of the Municipal Finance Management Act, 2003 (Act No. 56 of 2003);

  • risk analysis the analysis required under Rule 17f-7(a)(1)(i)(A).

  • Applied behavior analysis means the design, implementation, and evaluation of environmental modifications, using behavioral stimuli and consequences, to produce socially significant improvement in human behavior, including the use of direct observation, measurement, and functional analysis of the relationship between environment and behavior.

  • Guaranteed analysis means the minimum percentage of each plant nutrient guaranteed or claimed to be present.

  • Asset adequacy analysis means an analysis that meets the standards and other requirements referred to in 5.34(5)“d.”

  • Research Analyst means any individual employed by Loomis Sayles who has been designated as a Research Analyst or Research Associate by Loomis Sayles. A person is considered a Research Analyst only as to those Covered Securities which he or she is assigned to cover and about which he or she issues research reports to other Investment Persons or otherwise makes recommendations to Investment Persons beyond publishing their research. As to other securities, he or she is simply an Access Person.

  • Credential analysis means a process or service by which a third party affirms the validity of an identity document described in section 25(6)(c) through a review of public and proprietary data sources conducted remotely.

  • Brand Analytics Code means computer code provided by Brand from time to time for inclusion in produced content, i.e., tracking links.

  • Licensed behavior analyst means a person who holds current certification or meets the standards to be certified as a board certified Behavior Analyst or a board certified Assistant Behavior Analyst issued by the Behavior Analyst Certification Board, Inc., or any successor in interest to that organization and whom the Board of Psychological Examiners licenses as a Behavior Analyst.

  • Comprehensive resource analysis means an analysis including,

  • Operating Statement Analysis Report format substantially in the form of and containing the information called for therein for the Mortgage Loans, or such other form for the presentation of such information as may be approved from time to time by the CREFC® for commercial mortgage securities transactions generally.

  • Total resource cost test or "TRC test" means a standard that is met if, for an investment in energy efficiency or demand-response measures, the benefit-cost ratio is greater than one. The benefit-cost ratio is the ratio of the net present value of the total benefits of the program to the net present value of the total costs as calculated over the lifetime of the measures. A total resource cost test compares the sum of avoided electric utility costs, representing the benefits that accrue to the system and the participant in the delivery of those efficiency measures, as well as other quantifiable societal benefits, including avoided natural gas utility costs, to the sum of all incremental costs of end-use measures that are implemented due to the program (including both utility and participant contributions), plus costs to administer, deliver, and evaluate each demand-side program, to quantify the net savings obtained by substituting the demand-side program for supply resources. In calculating avoided costs of power and energy that an electric utility would otherwise have had to acquire, reasonable estimates shall be included of financial costs likely to be imposed by future regulations and legislation on emissions of greenhouse gases.

  • Paralysis means complete and irreversible loss or use of an arm or leg (without severance).

  • Sight Triangle means the triangular shape formed by street lines of a corner lot where such lot is located at the intersection of two or more streets and the line drawn from a point in one street to a point in the other street, each such point being 10.5 metres (34.4 feet) from the point of intersection of the streets measured along the said street lines provided that where the two streets do not intersect at a point, the point of the intersection of the street lines shall be deemed to be the intersection of the projected tangents to the street lines drawn through the extremities of the interior lot lines. Such triangular shape may also be called a daylighting triangle.

  • CMSA Operating Statement Analysis Report means a report substantially in the form of, and containing the information called for in, the downloadable form of the "Operating Statement Analysis Report" available as of the Closing Date on the CMSA Website or in such other form for the presentation of such information and containing such additional information as may from time to time be approved by the CMSA for commercial mortgage-backed securities transactions generally.

  • CREFC® Operating Statement Analysis Report The monthly report in the “Operating Statement Analysis Report” format substantially in the form of and containing the information called for therein for the Mortgage Loans, or such other form for the presentation of such information as may be approved from time to time by the CREFC® for commercial mortgage securities transactions generally.

  • Rebate Analyst means the person or firm selected by the Issuer to calculate the Rebate Amount, which person or firm shall either be a firm of attorneys or independent certified public accountants with expertise in the calculation of the Rebate Amount.

  • Dataset means the data specified in Appendix 1 (Environmental Information) to Schedule 11.2 (Management Information) as the same may be amended from time to time by the Secretary of State (acting reasonably);

  • Stability (7) means the standard deviation (1 sigma) of the variation of a particular parameter from its calibrated value measured under stable temperature conditions. This can be expressed as a function of time.

  • Treatability study means a study in which a hazardous waste is subjected to a treatment process to determine: (1) Whether the waste is amenable to the treatment process, (2) what pretreatment (if any) is required, (3) the optimal process conditions needed to achieve the desired treatment, (4) the efficiency of a treatment process for a specific waste or wastes, or (5) the characteristics and volumes of residuals from a particular treatment process. Also included in this definition for the purpose of the § 261.4 (e) and (f) exemptions are liner compatibility, corrosion, and other material compatibility studies and toxicological and health effects studies. A “treatability study” is not a means to commercially treat or dispose of hazardous waste.

  • Certificate of Analysis means a document signed by an authorized representative of Manufacturer, describing Specifications for, and testing methods applied to, Product, and the results of testing.

  • Geotechnical report or "geotechnical analysis" means a scientific study or evaluation conducted by a qualified expert that includes a description of the ground and surface hydrology and geology, the affected land form and its susceptibility to mass wasting, erosion, and other geologic hazards or processes, conclusions and recommendations regarding the effect of the proposed development on geologic conditions, the adequacy of the site to be developed, the impacts of the proposed development, alternative approaches to the proposed development, and measures to mitigate potential site-specific and cumulative geological and hydrological impacts of the proposed development, including the potential adverse impacts to adjacent and down-current properties. Geotechnical reports shall conform to accepted technical standards and must be prepared by qualified professional engineers or geologists who have professional expertise about the regional and local shoreline geology and processes.

  • Development Report means a written account of Licensee’s progress under the Development Plan having at least the information specified on Appendix B to this Agreement, and shall be sent to the address specified on Appendix B.

  • Engineering means the application of scientific knowledge for the design, control, or use of building structures, equipment, or apparatus.

  • Testing means that element of inspection that determines the properties or elements, including functional operation of materials, equipment, or their components, by the application of established scientific principles and procedures.