Working sample definition

Working sample means the number of seeds required under §§ 402 and 403 of the Federal Seed Act.
Sample 1Sample 2Sample 3
Working sample means the sample of the printed circuit board for the analog circuitry developed and manufactured in accordance with the Target Specifications.
Sample 1
Working sample means the quantity of material which is obtained by dividing a repre­sentative sample with a multiple-slot divider as set out in item 11.
Sample 1

Examples of Working sample in a sentence

  • Working sample (mock-up) 11/02/98 11/02/98 *Rockford visit our facility on Nov.

  • Working sample: 4,986 GISAID SARS-CoV-2 Omicron sub-variants BA.4 and BA.5 genomes (a July, 2022, sample).

  • Working sample digests for analyses were prepared according to Capentar and Hendricks [15].

  • Grading ProcedureThe grading of the maize is being done according to the grading standards in 2.4, based on the following:• A Working sample of at least 200grams is obtained by dividing the grading sample in smaller samples using a Multi slot divider.• The moisture content is being measured by using a moisture meter with a repeatability of +-0.3 as indicated by the supplier.• The broken kernels are being calculated by using a 4.5mm round whole metal sieve.

  • Working sample was obtained from the submitted sample and analyzed for selected physico-chemical properties mainly texture, bulk density, soil pH, cation exchangeable capacity (CEC), organic carbon, total N, and available P using standard laboratory procedures at Debre Zeit Agricultural Research Center soil laboratory.

  • Working sample must also be submitted before placing purchase order for final approval (If desired by BFCC).

  • Working sample solution was prepared by dilution of 25 ml of the above sample stock solution with 25 ml of methanol to give a concentration of 125µg/ml and 250µg/ml of lamivudine and zidovudine respectively.


More Definitions of Working sample

Working sample means the number of seeds required under §§ 402 and 403 of the Federal Seed Act.R3-4-402. Labeling
Sample 1

Related to Working sample

  • DNA sample means any material that has come from a human body and consists of or includes human cells;

  • Working Week means an average of 48 hours each week calculated over a 17-week reference period.

  • Bid sample means a sample to be furnished by a bidder to show the characteristics of the item offered in the bid.

  • Drug sample means a unit of a prescription drug that is not intended to be sold and is intended to promote the sale of the drug.

  • Biological Samples means any physical samples obtained from Study Participants in accordance with the Protocol for the purposes of the Study.

  • Grab sample means an individual sample collected in less than 15 minutes in conjunction with an instantaneous flow measurement.

  • Produced Material means records, software and other material, whether complete or not, that, as a result of this Agreement, are produced or provided by the Contractor or a Subcontractor and includes the Incorporated Material;

  • COGS means the cost of goods sold as determined in accordance with U.S.GAAP;

  • Assay means a laboratory analysis of Crude Petroleum to include the following: A.P.I. Gravity, Reid vapor pressure, composition, pour point, water and sediment content, sulfur content, viscosity, distillation, hydrogen sulfide, flash/boiling point and other characteristics as may be required by Carrier.

  • Range During Sampling or "(RDS)" as a sample type means the maximum and minimum of all values recorded as a result of analyzing each grab sample of; 1) a Composite Sample, or, 2) a Grab Sample Average. For those Permittee with pH meters that provide continuous monitoring and recording, Range During Sampling means the maximum and minimum readings recorded with the continuous monitoring device during the Composite or Grab Sample Average sample collection.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Manufacturing Site means the facilities where a Compound is Manufactured by or on behalf of a Party, as such Manufacturing Site may change from time to time in accordance with Section 8.7.

  • Manufacturing Cost means ***

  • Active Ingredient means the clinically active material(s) that provide pharmacological activity in a pharmaceutical product (excluding formulation components such as coatings, stabilizers, excipients or solvents, adjuvants or controlled release technologies).

  • Carbon dioxide equivalent or “CO2 equivalent” or “CO2e” means the number of metric tons of CO2 emissions with the same global warming potential as one metric ton of another greenhouse gas. Global warming potential values shall be determined consistent with the definition of Carbon Dioxide Equivalent in MRR section 95102(a).

  • Samples mean representative physical examples of materials, equipment or workmanship, used to confirm compliance with requirements and/or to establish standards for use in execution of the Work.

  • Manufacturing operation means a process in which materials are changed, converted, or transformed into a different state or form from which they previously existed and includes refining materials, assembling parts, and preparing raw materials and parts by mixing, measuring, blending, or otherwise committing such materials or parts to the manufacturing process. "Manufacturing operation" does not include packaging.

  • Fully Burdened Manufacturing Cost means, with respect to any Licensed Product supplied by or on behalf of NVCR to Zai hereunder if such Licensed Product (or any precursor or intermediate thereof) is manufactured by a Third Party manufacturer [***].

  • Product means any deliverable under the Contract, which may include commodities, services, technology or software.

  • plant products means products of plant origin, unprocessed or having undergone simple preparation in so far as these are not plants, set out in Annex IV-A, Part 3 to this Agreement;

  • Reference biological product means the single biological product licensed pursuant to 42 U.S.C.

  • Working pressure means the settled pressure of a compressed gas at a reference temperature of 15 °C in a full pressure receptacle;

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Accelerator-produced material means any material made radioactive by a particle accelerator.

  • Development Cost means the total of all costs incurred in the completion of a Development excluding Developer Fee, operating deficit reserves, and total land cost as typically shown in the Development Cost line item on the development cost pro forma.

  • Cost of materials means the cost of components, parts or materials which are intended for the production, manufacturing or assembling of the goods bid for and which are not produced, manufactured or assembled in the factory where the production, manufacture or assembly of such goods occurs, including freight, landing costs, port charges, import duties and other import costs of such components, parts or materials and all costs in connection with the handling and transport thereof prior to delivery at that factory;