APPENDIXES. 12.1. Form of tender;
12.2. Technical Specification;
12.3. Qualification requirements;
12.4. Declaration of compliance with minimum qualification requirements.
1. INFORMATION ABOUT THE SUPPLIER:
1) announcement of the procurement published 2023-12-04 at the website xxx.xxxxxxxxxxxxxx.xx;
2) terms of competition;
3) appendixes of terms of competition.
APPENDIXES. 12.1. Technical specification.
12.2. Form of Tender;
APPENDIXES. 12.1. Form of tender Supplier’s address For the tender responsible person name, surname Phone Fax E-mail Tender valid (tender valid not shorter than 2020-09-30) By this tender, we confirm that we agree with all conditions laid down in:
1) announcement of the procurement published at the website xxx.xxxxxxxxxxxxxx.xx;
2) terms of competition;
3) appendixes of terms of competition. We propose this equipment: No. Title Quantity Unit Price without VAT Price with VAT (if applicable) 1 2 3 4 5 6
1. Automatic line with nails palets 1 unit TOTAL (price of the tender): Proposed equipment is in compliance with the requirements specified in terms of competitions and their characteristics are as follow: No. Required minimum specification and amount of equipment Offered specification and amount of equipment
APPENDIXES. 12.1 Technical specifications;
12.2 Tender form;
12.3 Declaration of compliance of the minimum qualification requirements;
12.4 Project of the procurement contract. UAB „Modestina ir ko“ (hereinafter – buyer) is going to procure modern and innovative equipment for quicker cutting of materials in the implementation of the project “Installation of modern cutting equipment in the activity of UAB “Modestina ir ko” (No. 03.3.1-LVPA-K-850-01- 0046) that is co-financed with the assets of the EU structural funds and of the Republic of Lithuania; these changes will have a positive effect on the decrease of the possibility of industrial spoilage and increase of the total industrial productivity at the enterprise.
APPENDIXES. 12.1. Form of tender;
12.2. Qualification requirements;
12.3. Supplier's declaration. OBJECT OF PROCUREMENT: Die cutting machine with finishing function and automatic stripping and blanking Supplier's address Person responsible for the tender (name, surname) Phone Fax E-mail Tender validation date (Tender must be valid at least until 2022-06-07) By this tender we confirm that we agree with all conditions laid down in:
1) announcement of the procurement published 2022-02-25 at the website xxx.xxxxxxxxxxxxxx.xx;
2) terms of competition;
3) appendixes of terms of competition. We propose: No. Title Quantity Unit Price,Eur (without VAT) Price,Eur (with VAT if applicable)
1. Die cutting machine with finishing function and automatic stripping and blanking 1 Unit TOTAL (total Tender Price): TECHNICAL SPECIFICATION The Goods offered are fully compliant with the requirements laid down in the Procurement Documents and their properties are as follows: No. Required features and configuration Offered features and configuration (PLEASE SPECIFY)
1 Sheet size No less than 750x580 mm
2 Paper grammage From 100 g/m2
3 Max speed No less than 5000 sheets/hour
4 Max pressure force No less than 120 T 5 Die cutting knives height standard, 23.8 mm 6 Sheets feeder automatic, adapted for label paper
APPENDIXES. 12.1. Form of tender;
12.2. Qualification requirements;
12.3. A declaration of compliance with qualification requirements;
12.4. Supplier's declaration. OBJECT OF PROCUREMENT: Automatic cardboard coating machine for plastic cups with digital technology Supplier's address Person responsible for the tender (name, surname) Phone Fax E-mail Tender validation date (Tender must be valid at least until 2021-03-14) By this tender we confirm that we agree with all conditions laid down in:
1) announcement of the procurement published 2020-12-01 at the website xxx.xxxxxxxxxxxxxx.xx;
2) terms of competition;
3) appendixes of terms of competition. We propose: No. Title Quantity Unit Price,Eur (without VAT) Price,Eur (with VAT if applicable)
1. Automatic cardboard coating machine for plastic cups withdigital technology 1 Unit TOTAL (total Tender Price): TECHNICAL SPECIFICATION The Goods offered are fully compliant with the requirements laid down in the Procurement Documents and their properties are as follows: No. Required features and configuration Offered features and configuration (PLEASE SPECIFY) 1 Speed - Not less, then 135 pcs/min.
APPENDIXES. 12.1. Form of tender Supplier’s address For the tender responsible person name, surname Phone Fax E-mail Tender valid (tender valid not shorter than 2020-10-30) By this tender, we confirm that we agree with all conditions laid down in:
1) announcement of the procurement published at the website xxx.xxxxxxxxxxxxxx.xx;
2) terms of competition;
3) appendixes of terms of competition. We propose this equipment: No. Title Quantity Unit Price without VAT Price with VAT (if applicable) 1 2 3 4 5 6
1. The production technological biorefinery equipment 1 unit TOTAL (price of the tender): Proposed equipment is in compliance with the requirements specified in terms of competitions and their characteristics are as follow: No. Required minimum specification and amount of equipment Offered specification and amount of equipment
1. Capacity of production technological biorefinery equipment Up to 200 kg production of plant origin CO2 crude oil, working 5 days a week. 16 hours a day
2. Typical characteristics of the raw material to be processed:
2.1. Humidity of raw extract Up to 15%
2.2. Mass of wax and lipids in crude oil Up to 25%
3. Waxes, lipids separation / collection function Mandatory
4. Solving crude oil in ethanol in closed reactor with mixing option Between -60 and -80 °C temperature
5. Winterization procedure Mandatory
6. Filtering system in which cooled crude oil with ethanol is pumped through primary filter where waxes and lipids are separated. If there is a need, filtrate can be filtered again though smaller size filter Mandatory
7. Quantity of crude oil can be filtered at one time (before the procedure) Not less than 180 kg
8. Quantity of procedure after the procedure Not less than 1700 l ekstrakto tirpalo and not less than 40-50 kg of waxes
9. Solvent recovery from oil fraction, purification and collection for reuse Mandatory
10. Rotary evaporator Not less than 50 l
11. Thermal processing in closed reactor (decarboxylation) Mandatory, up to 150°C
12. The amount of raw material that can be processed at one time Not less than 100 kg
APPENDIXES. 12.1. Technical specification.
12.2. Form of Tender;
1. Equipment new and not used Yes
2. Equipment model year of issue Not earlier than 2015 m.
3. The equipment complies with European Union legislation safety requirements Yes
4. Max. web width Not less than 430 mm
5. Max. printing speed Not less than 200 m/min
6. Flexo and die cutting Printing repeat from 254 mm to 600 mm
7. Substrate thickness range from 12 microns to 250 gr/m2
8. Critical materials Unsupported films: 12-40 mic BOPP, 12-50 mic PET, PVC, OPS, 12-20 mic Aluminium
9. Non-gear programmable servo drive system Yes
10. Anti-static bars through all the machine Yes
11. Single side Corona Treatment Not less than 3 kW
12. Single side Corona Treatment Yes
APPENDIXES. 12.1. Technical specification.
12.2. Form of Tender; TECHNICAL SPECIFICATION
1. Objective Purchase point – to buy label slitting and rewinding machine
2. Technical specification No. Parameters / completing parts Requirements General requirements for equipment:
1. Equipment must be new and unused Yes
2. Equipment model year of manufacture no earlier than in 2015
3. Equipment must be complying with European Union statutory safety requirements. Yes Technical requirements for equipment:
1. Max. web width not less than 430 mm
2. Max. speed not less than 300 m/min
3. Substrate thickness range from 20 mkr to 250 gr/m2, depends on substrate
4. Substrate tipe Unsupported film (OPP,BOPP); - Shrink film (PET, PVC, OPS); - Paper (C1S,C2S, etc); - Pressure Sensitive Paper; - PS Film
5. Maximum unwind diameter not less than 700 mm
6. Maximum rewind diameter not less than 400 mm
7. Unwind Single shaft unwide system with automatic tension control, Roll expanding shaft, with pneumatic lock for cores 76 mm (3"); Double-sided axle support on the frame side and on the operator side.
8. Rewinder Two shaft servo driven rewinder, Double rewinding direction, clockwise and anticlockwise; Servo driven rewinding shaft; Roll expanding shaft, with pneumatic lock for cores 76 mm 2 pcs and 2 pcs axis for 40 mm cores constant web tension, Taper tension rewin Double-sided axle support on the frame side and on the operator side.
9. Web guide 2 pcs- one in front of inspection camera and second in front of the longidinal slitting unit, their correction not less than 10mm in both directions. Web guide sensors-ultrasonic, to be able to see the edge of transparent materials. Optical sensor for scanning printed lines
10. Slitting system Slitting with replaceable cartridge system. One cartridge shears slitting with not less than 3 knives. Second cartridge with razor type, with not less than 14 knives and knives holder
11. Tension control system Automatic tension control based entirely on servo motors. Separate servo motor on the unwinding axis, separe servo motor tension/clamping shaft, separate independent servo motor on each rewinding axis. Tension adjustment with taper function
12. Additional functions:
12.1. Jog foot pedal and rewind core deflate foot pedal for handsfree operation Yes
12.2. Additional waste wind-up unit, coreless rewind shaft Yes No. Parameters / completing parts Requirements
12.3. Automated strapping - Auto web gripper/ feeder Yes
12.4. Nikka Inspection System Nikka M1+ or a...
APPENDIXES. 12.1. Form of tender Supplier’s address For the tender responsible person name, surname Phone Fax E-mail Tender valid (tender valid not shorter than 2021-01-13) By this tender, we confirm that we agree with all conditions laid down in:
1) announcement of the procurement published at the website xxx.xxxxxxxxxxxxxx.xx;
2) terms of competition;
3) appendixes of terms of competition. We propose this equipment: No. Title Quantity Unit Price without VAT Price with VAT (if applicable) 1 2 3 4 5 6
1. Bag making machine 1 unit TOTAL (price of the tender): Proposed equipment is in compliance with the requirements specified in terms of competitions and their characteristics are as follow: No. Required minimum specification and amount of equipment Offered specification and amount of equipment
1 Mother roll width, mm max. 900 mm 2 Outer diameter of mother roll, mm max. 1300 mm