Common use of FINAL PROVISIONS Clause in Contracts

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well.

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well.

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well.. Raw material Plastic granules 8 components as follow: 2 components, virgin granules 20÷100%, bulk density 0,5÷0,6kg/dm3 2 components, virgin granules 10÷50%, bulk density 0,5÷0,6 kg/dm3 2 components, additive granules 2÷5%, bulk density 0,6÷0,7 kg/dm3 2 components, additive granules 0,5÷2%, bulk density 0,6÷0,7kg/dm3 Max. productivity for at least 8 components From 300kg/h Max. nominal output of gravimetric blender From 600kg/h Max. mixer capacity From 16 l Gravimetric blender must be equipped with a microprocessor control and at least an 10" touch screen panel Yes Possibility to store recepies Yes, from 90 recepies Mixer 230V/1/50Hz Standard slide gate From 1 unit From 55x55 mm From 45 litres hopper From Ø 280mm flange Standard slide gate From 2 units, From 55x55 mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 45 litres hopper From Ø 280mm flange External screw dosing station 2 units ,complete with min 20 litres hopper and min Ø 280mm flange Metering screw From 2 units, From Ø 25mm Acoustic alarm Yes Vacuum unit with automatic loading of plastic granules to be combined with one or more material receivers Yes Blower of vacuum unit, power From 3 kW Material receivers At least 2units Capacity from 15 l From Ø40 Material receivers At least 2 Capacity from 10 l From Ø40

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well.. No. Requirement Value of parameter 1 Size of the chuck upper surface (length x width) Not less than 500 x 200 mm

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well.. 1 Size of manufactured free-form surfaces Not less than 300 2 Size of manufactured spheres Not less than 200 3 Size of manufactures aspheres Not less than 300

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well.. 1 Maximum glass height From 2700 mm to 3000 mm

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well.. Power Not less than 400A At least 72 pcs. 16A output, at least 12 psc. 19 pin multiconectors “socapex” type Mandatory

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). Procurement object: : CO2 refrigeration kit (1 set) In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well.

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well.. 1 Size of manufactured free-form surfaces Not less than 300 2 Size of manufactured spheres Not less than 120 3 Size of manufactures aspheres Not less than 300

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well.. Diode matrix At least 19 LEDs LED rated power Not less than 40W RGBL color mixing Mandatory Luminous flux Not less than 11000 lm Zoom range (“zoom”) Within the range of at least 4-59 degrees PAN/TILT range PAN not less 540 degrees, TILT not less 240 degrees Each set comes complete with a transport box Mandatory Consisting of at least 200 pcs. RGB LED Mandatory Consisting of no less than 100 pcs. White LED Mandatory RGBW color mixing Mandatory Has the ability to control led segments when accessing Mandatory Complete with magnetic diffusion filter Mandatory Each set comes complete with a transport box Mandatory Equipment is new (unused) Yes Guarantee Not less than 12 months from the date of signing the transfer-acceptance act Supplier’s name Supplier’s address Responsible person’s Name and Surname Phone number Fax number E-mail address We hereby point out that we agree with all Procurement Terms and Conditions, stipulated in: Tendering Process Notice, published on the website xxx.xxxxxxxxxxxxxx.xx on 12/10/2022. Terms and Conditions of the Tender; Annexes to the Procurement Documents. We offer the following Goods:

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well.. Purpose: for coextrusion of wood-plastic composite (WPC) profiles Yes Type: 2 screws, conical Max. capacity: From 30 to 40 kg/h Maximum power installed till 40 kW Power supply: 3-f, 380V, 50Hz Features: the surface of the main working pair is coated with molybdenum or tungsten carbide. Possibility to mount above the main extruder, or from the side. Equipment must be compatible with the main coextrusion equipment of buyer. All documentation will be provided by the request of the Supplier. Supplier must follow all requirements of 5 part of these Terms and Conditions. Yes Purpose: for forming a profile from WPC. Product drawing on request Yes Type: coextruded, with surface embossing device Yes Profile weight: < 3.0 kg/m Extrusion speed: 0,5-1,0 m/min Purpose: for forming a profile from WPC. Product drawing on request Yes Type: coextruded, with surface embossing device Yes Profile weight: < 3.0 kg/m Extrusion speed: 0,5-1,0 m/min 1 Equipment must be new (not used) Yes 2 The model of the proposed equipment was introduced to the market not earlier than in the year of 2017 Please, specify

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well.. Moving spotlights - 20 units Luminous flux Not less than 16000 lm Zoom range Not less than 2° to 42° range „Iris“ function Yes CMY colour blending Yes CRI Not less than 80 (with or without high CRI filter) Supplied with transport box Yes Luminous flux Not less than 21000 lm Beam field angle In range from 18° to 20° RGBW colour mixing Yes Rating for outdoor use IP65 Yes 45° ir 100° magnetic filter frames Yes Supplied with transport box Yes Luminous flux Not less than 2390 lm Beam field angle In range from 30° to 35° Not xxxxxxx then RGBWA colour mixing Yes Nominal LED Power not less then 10W Yes Rating for outdoor use IP65 Yes Luminous flux Not less than 40000 lm Beam field angle In range from 115° to 120° RGBW colour mixing Yes Rating for outdoor use IP65 Yes CRI index Not less than 85 Supplied with transport box Yes Equipment must be new (not used) Yes Warranty No less than 12 months from signing the acceptance protocol Supplier’s name Supplier’s address Responsible person’s Name and Surname Phone number Fax number E-mail address We hereby point out that we agree with all Procurement Terms and Conditions, stipulated in: Tendering Process Notice, published on the website xxx.xxxxxxxxxxxxxx.xx on 29/09/2022. Terms and Conditions of the Tender; Annexes to the Procurement Documents. We offer the following Goods:

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). In the case when the description of the Buyer: JSC "Isira", company no. 303044987, Xxxxxx xxx. 48B, LT-48403 Kaunas, Lithuania. Object of Procurement in the Technical Specification, refers to purchase: a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms set of their properties will be acceptable as well.automatic cutting equipment. Equipment requirements: