Additional provisions for RCP Sample Clauses

Additional provisions for RCP. 5.6.1.2.1. The parking manoeuvre shall be initiated by the driver but controlled by the system. A direct influence on steering angle, value of acceleration and deceleration via the remote control device shall not be possible. 5.6.1.2.2. A continuous actuation of the remote control device by the driver is required during the parking manoeuvre. 5.6.1.2.3. If the continuous actuation is interrupted or the distance between vehicle and remote control device exceeds the specified maximum RCP operating range (SRCPmax) or the signal between remote control and vehicle is lost, the vehicle shall stop immediately. 5.6.1.2.4. If a door or trunk of the vehicle is opened during the parking manoeuvre, the vehicle shall stop immediately. 5.6.1.2.5. If the vehicle has reached its final parking position, either automatically or by confirmation from the driver, and the start/run switch is in the off position, the parking braking system shall be automatically engaged.
AutoNDA by SimpleDocs
Additional provisions for RCP. 5.6.1.2.1. The parking …. A direct influence on steering angle, value of acceleration and deceleration via the remote-control device or by the movement of the driver shall not be possible. 5.6.1.2.2. Either a continuous actuation of the remote-control device by the driver or alternatively (for systems based on detection of driver position and movement) a continuous movement of the driver in the same longitudinal direction as the vehicle, is required during the parking manoeuvre."

Related to Additional provisions for RCP

  • Special Provisions for Affected Systems For the re-payment of amounts advanced to Affected System Operator for System Upgrade Facilities or System Deliverability Upgrades, the Developer and Affected System Operator shall enter into an agreement that provides for such re-payment, but only if responsibility for the cost of such System Upgrade Facilities or System Deliverability Upgrades is not to be allocated in accordance with Attachment S to the ISO OATT. The agreement shall specify the terms governing payments to be made by the Developer to the Affected System Operator as well as the re-payment by the Affected System Operator.

  • Supplemental Provisions for Resecuritization This Agreement may be supplemented by means of the addition of a separate Article hereto (a "Supplemental Article") for the purpose of resecuritizing any of the Certificates issued hereunder, under the following circumstances. With respect to any Class or Classes of Certificates issued hereunder, or any portion of any such Class, as to which the Company or any of its Affiliates (or any designee thereof) is the registered Holder (the "Resecuritized Certificates"), the Company may deposit such Resecuritized Certificates into a new REMIC, grantor trust, FASIT or custodial arrangement (a "Restructuring Vehicle") to be held by the Trustee pursuant to a Supplemental Article. The instrument adopting such Supplemental Article shall be executed by the Company, the Master Servicer and the Trustee; provided, that neither the Master Servicer nor the Trustee shall withhold their consent thereto if their respective interests would not be materially adversely affected thereby. To the extent that the terms of the Supplemental Article do not in any way affect any provisions of this Agreement as to any of the Certificates initially issued hereunder, the adoption of the Supplemental Article shall not constitute an "amendment" of this Agreement. Each Supplemental Article shall set forth all necessary provisions relating to the holding of the Resecuritized Certificates by the Trustee, the establishment of the Restructuring Vehicle, the issuing of various classes of new certificates by the Restructuring Vehicle and the distributions to be made thereon, and any other provisions necessary for the purposes thereof. In connection with each Supplemental Article, the Company shall deliver to the Trustee an Opinion of Counsel to the effect that (i) the Restructuring Vehicle will qualify as a REMIC, grantor trust, FASIT or other entity not subject to taxation for federal income tax purposes and (ii) the adoption of the Supplemental Article will not endanger the status of the Trust Fund as a REMIC or (subject to Section 10.01(f)) result in the imposition of a tax upon the Trust Fund (including but not limited to the tax on prohibited transactions as defined in Section 860F(a)(2) of the Code and the tax on contributions to a REMIC as set forth in Section 860G(d) of the Code).

  • Final Provisions Clause 16

  • Additional Provisions The By-Laws may include further provisions for Shareholders' votes and meetings and related matters.

  • Transitional Provisions 24.1. As from the official date of entry into force of the 01 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approval under this Regulation as amended by the 01 series of amendments. 24.2. As from 12 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant approvals only if the type of components to be approved meets the requirements of Part I of this Regulation as amended by the 01 series of amendments to this Regulation. 24.3. Type approvals of components other than fuel rail, as defined in paragraph 4.72., granted according to the original version of this Regulation or of components granted according to the 01 series of amendments, shall remain valid and shall be accepted for the purpose of their installation on vehicles as long as the requirements for the specific component have not changed by any series of amendments. 24.4. As from 18 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of Part II of this Regulation as amended by the 01 series of amendments to this Regulation. 24.5. Until 12 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation can continue to grant type approvals for the type of components to the original version of this Regulation without taking into account the provisions of the 01 series of amendments. 24.6. Until 18 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation can continue to grant type approvals for the vehicle type to the original version of this Regulation without taking into account the provisions of the 01 series of amendments. 24.7. Notwithstanding the provisions of paragraphs 24.5. and 24.6., Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types of component or vehicle types which have been issued according to this Regulation without taking into account the provisions of the 01 series of amendments to this Regulation. 24.8. As from the official date of entry into force of the 02 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approval under this Regulation as amended by the 02 series of amendments. 24.9. As from 1 September 2017 Contracting Parties applying this Regulation shall grant approvals only if the type of components to be approved meets the requirements of Part I of this Regulation as amended by the 02 series of amendments to this Regulation. 24.10. As from 1 September 2018 Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of Part II of this Regulation as amended by the 02 series of amendments to this Regulation. 24.11. As from 1 September 2019 Contracting Parties applying this Regulation may refuse to recognize approvals of a type of vehicle which have not been granted in accordance with Part II of this Regulation as amended by the 02 series of amendments to this Regulation. 24.12. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types of component or vehicle types which have been issued according to this Regulation without taking into account the provisions of the 02 series of amendments to this Regulation. 24.13. Notwithstanding paragraphs 24.11. and 24.12., Contracting Parties applying this Regulation shall continue to accept type approvals granted to the preceding series of amendments, which are not affected by the 02 series of amendments.

  • Attachment C, Standard State Provisions for Contracts and Grants Attachment C is hereby deleted in its entirety and replaced by the Attachment C December 15, 2017 attached to this Amendment. Child Support (Applicable to natural persons only; not applicable to corporations, partnerships or LLCs). Contractor is under no obligation to pay child support or is in good standing with respect to or in full compliance with a plan to pay any and all child support payable under a support order as of the date of this amendment.

  • Initial Provisions Establishment of a Free Trade Area

  • PROVISIONS FOR NON UNITED STATES FEDERAL ENTITY PROCUREMENTS UNDER UNITED STATES FEDERAL AWARDS OR OTHER AWARDS A. EQUAL EMPLOYMENT OPPORTUNITY. Except as otherwise provided under 41 C.F.R. § 60, all contracts that meet the definition of “federally assisted construction contract” in 41 C.F.R. § 60- 1.3 must include the equal opportunity clause provided under 41 C.F.R. §60-1.4(b), in accordance with Executive Order 11246, “Equal Employment Opportunity” (30 FR 12319, 12935, 3 C.F.R. §, 1964-1965 Comp., p. 339), as amended by Executive Order 11375, “Amending Executive Order 11246 Relating to Equal Employment Opportunity,” and implementing regulations at 41 C.F.R. § 60, “Office of Federal Contract Compliance Programs, Equal Employment Opportunity, Department of Labor.” The equal opportunity clause is incorporated herein by reference. X. XXXXX-XXXXX ACT, AS AMENDED (40 U.S.C. § 3141-3148). When required by federal program legislation, all prime construction contracts in excess of $2,000 awarded by non- federal entities must include a provision for compliance with the Xxxxx-Xxxxx Act (40 U.S.C. § 3141-3144, and 3146-3148) as supplemented by Department of Labor regulations (29 C.F.R. § 5, “Labor Standards Provisions Applicable to Contracts Covering Federally Financed and Assisted Construction”). In accordance with the statute, contractors must be required to pay wages to laborers and mechanics at a rate not less than the prevailing wages specified in a wage determination made by the Secretary of Labor. In addition, contractors must be required to pay wages not less than once a week. The non-federal entity must place a copy of the current prevailing wage determination issued by the Department of Labor in each solicitation. The decision to award a contract or subcontract must be conditioned upon the acceptance of the wage determination. The non-federal entity must report all suspected or reported violations to the federal awarding agency. The contracts must also include a provision for compliance with the Xxxxxxxx “Anti-Kickback” Act (40 U.S.C. § 3145), as supplemented by Department of Labor regulations (29 C.F.R. § 3, “Contractors and Subcontractors on Public Building or Public Work Financed in Whole or in Part by Loans or Grants from the United States”). The Act provides that each contractor or subrecipient must be prohibited from inducing, by any means, any person employed in the construction, completion, or repair of public work, to give up any part of the compensation to which he or she is otherwise entitled. The non-federal entity must report all suspected or reported violations to the federal awarding agency. Supplier must be in compliance with all applicable Xxxxx-Xxxxx Act provisions. C. CONTRACT WORK HOURS AND SAFETY STANDARDS ACT (40 U.S.C. § 3701-3708). Where applicable, all contracts awarded by the non-federal entity in excess of $100,000 that involve the employment of mechanics or laborers must include a provision for compliance with 40 U.S.C. §§ 3702 and 3704, as supplemented by Department of Labor regulations (29 C.F.R. § 5). Under 40 U.S.C. § 3702 of the Act, each contractor must be required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work week is permissible provided that the worker is compensated at a rate of not less than one and a half times the basic rate of pay for all hours worked in excess of 40 hours in the work week. The requirements of 40 U.S.C. § 3704 are applicable to construction work and provide that no laborer or mechanic must be required to work in surroundings or under working conditions which are unsanitary, hazardous or dangerous. These requirements do not apply to the purchases of supplies or materials or articles ordinarily available on the open market, or contracts for transportation or transmission of intelligence. This provision is hereby incorporated by reference into this Contract. Supplier certifies that during the term of an award for all contracts by Sourcewell resulting from this procurement process, Supplier must comply with applicable requirements as referenced above.

  • Additional Provisions Respecting Insurance (a) All insurance required by this Tenant Agency Compliance Agreement shall be procured and maintained in financially sound and generally recognized responsible insurance companies authorized to write such insurance in the State and selected by the entity required to procure the same. The company issuing the policies required by Section 2.1(a) hereof shall be rated “A” or better by A.M. Best Co., Inc. in Best’s Key Rating Guide. Such insurance may be written with deductible amounts comparable to those on similar policies carried by other companies engaged in businesses similar in size, character and other respects to those in which the procuring entity is engaged. All policies of insurance required by Section 2.1 hereof shall provide for at least thirty (30) days prior written notice to the Agency of the restriction, cancellation or modification thereof. The policy evidencing the insurance required by Section 2.1(c) hereof shall name the Agency as an additional insured. All policies evidencing the insurance required by Section 2.1 (d)(ii) and (iv) shall name the Agency and the Tenant as additional insureds. (b) The certificate of insurance required by Section 2.1(c) hereof shall be delivered to the Agency on or before the date hereof. A copy of the certificates of insurance required by Section 2.1(d)(ii) and (iv) hereof shall be delivered to the Agency on or before the commencement of any construction or renovation of the Demised Premises. The Tenant shall deliver to the Agency before the first Business Day of each calendar year thereafter a certificate dated not earlier than the immediately preceding month reciting that there is in full force and effect, with a term covering the current year of the Tenant’s insurance policy, insurance of the types and in the amounts required by Section 2.1 hereof and complying with the additional requirements of Section 2.2(a) hereof. Prior to the expiration of each such policy or policies, the Tenant shall furnish to the Agency and any other appropriate Person a new policy or policies of insurance or evidence that such policy or policies have been renewed or replaced or are no longer required by this Tenant Agency Compliance Agreement. The Tenant shall provide such further information with respect to the insurance coverage required by this Tenant Agency Compliance Agreement as the Agency may from time to time reasonably require.

  • Certain General Provisions 30 5.1. Closing Fee..........................................................................30 5.2. Agent's Fee..........................................................................30 5.3.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!