Common use of Aerial Photography Clause in Contracts

Aerial Photography. The Engineer’s Surveyor shall provide aerial photography for low altitude aerial mapping appropriate for detailed design. i. Ground Control Accuracy Standards • The Engineer’s Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. • The Engineer’s Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. ii. Paneling Placement Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iii. Aerial Photography Standards and Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iv. LiDAR Technology The use of LiDAR Technology (mobile, terrestrial or aerial) will be acceptable when approved by the State and the accuracies of the specified tasks it will be used for are met or exceeded.

Aerial Photography. The Engineer’s Surveyor shall provide aerial photography for low altitude aerial mapping appropriate for detailed design. i. Ground Control Accuracy Standards •  The Engineer’s Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. •  The Engineer’s Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. ii. Paneling Placement Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iii. Aerial Photography Standards and Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iv. LiDAR Technology The use of LiDAR Technology (mobile, terrestrial or aerial) will be acceptable when approved by the State and the accuracies of the specified tasks it will be used for are met or exceeded.

Aerial Photography. The Engineer’s Surveyor shall provide aerial photography for low altitude aerial mapping appropriate for detailed design. i. Ground Control Accuracy Standards • The Engineer’s Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. • The Engineer’s Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. ii. Paneling Placement Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iii. Aerial Photography Standards and Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iv. LiDAR Technology The use of LiDAR Technology (mobile, terrestrial or aerial) will be acceptable when approved by the State and the accuracies of the specified tasks it will be used for are met or exceeded. DocuSign Envelope ID: 1FDB1C48-24B1-4C40-8A33-17263E465FE2 The Surveyor shall provide: • Digital Orthophotos on CD or DVD. • A photo index of the scanned aerial film frames or digital image frames for each frame of photography in the project.

Aerial Photography. The Engineer’s Surveyor shall provide aerial photography for low altitude aerial mapping appropriate for detailed design. i. Ground Control Accuracy Standards •  The Engineer’s Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. •  The Engineer’s Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. ii. Paneling Placement Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iii. Aerial Photography Standards and Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iv. LiDAR Technology The use of LiDAR Technology (mobile, terrestrial or aerial) will be acceptable when approved by the State and the accuracies of the specified tasks it will be used for are met or exceeded.

Aerial Photography. The Engineer’s Surveyor shall provide aerial photography for low altitude aerial mapping appropriate for detailed design. i. Ground Control Accuracy Standards • The Engineer’s Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. • The Engineer’s Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. ii. Paneling Placement Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iii. Aerial Photography Standards and Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iv. LiDAR Technology The use of LiDAR Technology (mobile, terrestrial or aerial) will be acceptable when approved by the State and the accuracies of the specified tasks it will be used for are met or exceeded. DocuSign Envelope ID: 0739EBD5-D505-46CB-B82C-2C058DE86DA5 The Surveyor shall provide: • Digital Orthophotos on CD or DVD. • A photo index of the scanned aerial film frames or digital image frames for each frame of photography in the project.

Aerial Photography. The Engineer’s Surveyor shall provide aerial photography for low altitude aerial mapping appropriate for detailed design. i. Ground Control Accuracy Standards • The Engineer’s Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. • The Engineer’s Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. ii. Paneling Placement Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iii. Aerial Photography Standards and Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State.. DocuSign Envelope ID: E7DAA847-BF7C-44E6-B32B-712DD5062C72 iv. LiDAR Technology The use of LiDAR Technology (mobile, terrestrial or aerial) will be acceptable when approved by the State and the accuracies of the specified tasks it will be used for are met or exceeded.

Aerial Photography. The Engineer’s Surveyor shall provide aerial photography for low altitude aerial mapping appropriate for detailed design. i. Ground Control Accuracy Standards • The Engineer’s Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the DocuSign Envelope ID: 81680129-218F-4A62-86EE-68C3C135A630 TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. • The Engineer’s Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. ii. Paneling Placement Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iii. Aerial Photography Standards and Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iv. LiDAR Technology The use of LiDAR Technology (mobile, terrestrial or aerial) will be acceptable when approved by the State and the accuracies of the specified tasks it will be used for are met or exceeded.

Aerial Photography. The Engineer’s Surveyor shall provide aerial photography for low altitude aerial mapping appropriate for detailed design. i. Ground Control Accuracy Standards • The Engineer’s Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. • The Engineer’s Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. ii. Paneling Placement Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iii. Aerial Photography Standards and Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iv. LiDAR Technology The use of LiDAR Technology (mobile, terrestrial or aerial) will be acceptable when approved by the State and the accuracies of the specified tasks it will be used for are met or exceeded. DocuSign Envelope ID: F9E4AA24-4672-4529-8EFA-00D1CA218520 The Engineer’s Surveyor shall provide: • Digital Orthophotos on CD or DVD. • A photo index of the scanned aerial film frames or digital image frames for each frame of photography in the project.

Aerial Photography. The Engineer’s Surveyor shall provide aerial photography for low altitude aerial mapping appropriate for detailed design. i. Ground Control Accuracy Standards • The Engineer’s Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. • The Engineer’s Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. ii. Paneling Placement Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iii. Aerial Photography Standards and Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iv. LiDAR Technology The use of LiDAR Technology (mobile, terrestrial or aerial) will be acceptable when approved by the State and the accuracies of the specified tasks it will be used for are met or exceeded. DocuSign Envelope ID: 55FA5821-DA2A-45EA-B48C-DDCD72177D5F The Surveyor shall provide: • Digital Orthophotos on CD or DVD. • A photo index of the scanned aerial film frames or digital image frames for each frame of photography in the project.

Aerial Photography. The Engineer’s Surveyor shall provide aerial photography for low altitude aerial mapping appropriate for detailed design. i. Ground Control Accuracy Standards • The Engineer’s Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. • The Engineer’s Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable.. DocuSign Envelope ID: 5A2DC6EC-64DB-4A02-A984-B96FAAFF8279 ii. Paneling Placement Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iii. Aerial Photography Standards and Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iv. LiDAR Technology The use of LiDAR Technology (mobile, terrestrial or aerial) will be acceptable when approved by the State and the accuracies of the specified tasks it will be used for are met or exceeded.

Aerial Photography. The Engineer’s Surveyor shall provide aerial photography for low altitude aerial mapping appropriate for detailed design. i. Ground Control Accuracy Standards • The Engineer’s Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. • The Engineer’s Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. ii. Paneling Placement Specifications For purposes of this Contract, all standards and specifications shall must be in accordance with established guidelines and recommended or approved by the State. iii. Aerial Photography Standards and Specifications For purposes of this Contract, all standards and specifications shall must be in accordance with established guidelines and recommended or approved by the State.. DocuSign Envelope ID: 9EFC6FE2-229E-4628-90C6-20E86398200F iv. LiDAR Technology The use of LiDAR Technology (mobile, terrestrial or aerial) will be acceptable when approved by the State and the accuracies of the specified tasks it will be used for are met or exceeded.

Aerial Photography. The Engineer’s Surveyor shall provide aerial photography for low altitude aerial mapping appropriate for detailed design. i. Ground Control Accuracy Standards •  The Engineer’s Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. •  The Engineer’s Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. ii. Paneling Placement Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iii. Aerial Photography Standards and Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State.. DocuSign Envelope ID: 32531276-D54D-42BA-B8CD-1FFE51D0946F iv. LiDAR Technology The use of LiDAR Technology (mobile, terrestrial or aerial) will be acceptable when approved by the State and the accuracies of the specified tasks it will be used for are met or exceeded.