License Period a. The License is hereby granted in favour of the Licensee for a total period of 15 (fifteen) years from the Commencement Date subject to unless otherwise terminated by Maha-Metro or surrendered by the Successful Bidder/Licensee, in term of provisions of License Agreement.
b. The tenure of License Agreement shall commence from the date of handing over of the property business space.
c. Tenure of the License Period of any additional space handed over subsequently shall be co- terminus with above period irrespective of date of actual handing over for such additional space.
d. There shall be a lock in period of five (05) years from the date of commencement of agreement/ handing over of licensed space.
e. Licensee shall have option to exit from the License Agreement immediately after completion of lock in period of 5 (Five) years. For it, Licensee shall have to issue 180 days prior notice to Maha-Metro. Such prior notice intimation can be given after four and half (4 ½) years however option to exit will be available only after five (05) years.
f. At no time during the license tenure, the Licensee shall be allowed to surrender partial Licensed Space which has been handed over to the Licensee by Maha-Metro.
g. At the end of License period or in the event of termination of this agreement prior to completion of license tenure, for any reason whatsoever, all rights given under this License Agreement shall cease to have effect and the premises shall revert to Maha-Metro, without any obligation to Maha-Metro to pay or adjust any consideration or other payment to the Licensee.
h. The tenure shall be inclusive of fitment period as applicable for the tendered space.
i. On completion/ termination of License Agreement, the Licensee shall hand over the space with normal wear & tear. The Licensee shall be allowed to remove its assets like temporary structure, furniture, almirahs, air-conditioners, DG sets, equipments, etc. without causing damage to the existing structure. However, the Licensee shall not be allowed to remove any facility, equipment, fixture, etc. which has become an integral part of the development plan of the space.
j. At the end of the License Period or sooner determination of this Agreement for any reason whatsoever all rights given under this License Agreement shall cease to have effect and the Licensed Area with all the furniture and fixtures and other assets permanently attached to the Licensed Area shall revert to Maha-Metro without any obligation on part of Maha-Metro to pay or adjust any consideration or other payment to the Licensee. The Licensee voluntarily gives Maha-Metro the right to seal the said Licensed Space(s) and remarket the same as part on its discretion upon Termination of this Agreement. No claim, compensation or damages will be entertained by Maha-Metro on this account.
Commercialization License Subject to the terms of this Agreement, including without limitation Section 2.2 and Theravance's Co-Promotion rights in Section 5.3.2, Theravance hereby grants to GSK, and GSK accepts, an exclusive license under the Theravance Patents and Theravance Know-How to make, have made, use, sell, offer for sale and import Alliance Products in the Territory.
Manufacturing Technology Transfer Upon AbbVie’s written request with respect to a given Collaboration CAR-T Product and Licensed Product, Caribou shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party Provider) of all Materials and Know-How Controlled by Caribou relating to the then-current process for the Manufacture of such Collaboration CAR-T Product and any corresponding Licensed Products (each, a “Manufacturing Process”). Caribou shall provide, shall cause its Affiliates to provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to provide, all reasonable assistance requested by AbbVie to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to implement each Manufacturing Process at the facilities designated by AbbVie. If requested by AbbVie, such assistance shall include facilitating the entering into of agreements with applicable Third Party suppliers relating to such Collaboration CAR-T Product and any corresponding Licensed Products. Without limitation of the foregoing, in connection with the Manufacturing Process and related transfer:
(a) Caribou shall, and shall cause its Affiliates to, make available to AbbVie (or its Affiliate or designated Third Party Provider, as applicable), and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to make available to AbbVie, from time to time as AbbVie may request, all Materials and Manufacturing-related Know-How Controlled by Caribou relating to each Manufacturing Process, including methods, reagents and processes and testing/characterization Know-How, and all documentation constituting material support, performance advice, shop practice, standard operating procedures, specifications as to Materials to be used, and control methods, that are necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party manufacturer, as applicable) to use and practice such Manufacturing Process;
(b) Caribou shall cause all appropriate employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility at mutually convenient times to assist with the working up and use of each Manufacturing Process and with the training of the personnel of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to the extent necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice such Manufacturing Process;
(c) Without limiting the generality of this Section 4.4.2, Caribou shall cause all appropriate analytical and quality control laboratory employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate analytical and quality control laboratory employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility and make available all necessary equipment, at mutually convenient times, to support and execute the provision of all applicable analytical methods and the validation thereof (including all applicable Know-How, Information and Materials Controlled by Caribou, and sufficient supplies of all primary and other reference standards);
(d) Caribou shall, and shall cause its Affiliates to, take such steps, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers take such steps, as are necessary or reasonably useful to assist AbbVie (or its Affiliate or designated Third Party Provider, as applicable) in obtaining any necessary licenses, permits or approvals from Regulatory Authorities with respect to the Manufacture of the applicable Collaboration CAR-T Products and corresponding Licensed Products at the applicable facilities; and
(e) Caribou shall, and shall cause its Affiliates to, provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers to provide, such other assistance as AbbVie (or its Affiliate or designated Third Party Provider, as applicable) may reasonably request to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice each Manufacturing Process and otherwise to Manufacture the applicable Collaboration CAR-T Products and corresponding Licensed Products.
Xxxxx, Haldimand, Norfolk An employee shall be granted five working days bereavement leave with pay upon the death of the employee’s spouse, child, stepchild, parent, stepparent, legal guardian, grandchild or step-grandchild.
Technology License 4.1 Unless any event described in Article 2.2 or 2.3 of this Agreement occurs, all of the technology required to be licensed for any of Party B’s business shall be provided by Party A on an exclusive basis. Party A will try its best to license Party B to use the technology owned by Party A, or re-license Party B to use the technology as approved by the owner.
4.2 The Parties shall negotiate with each other to enter into specific technology license contracts to expressly specify the detail matters such as the technology to be licensed, the method to license the technology, license fees and payment.
Commercial Supply After the Option Termination Date:
(a) if requested by Kolltan, the Parties shall undertake good faith negotiations regarding a commercial supply agreement pursuant to which MedImmune would supply to Kolltan, and Kolltan would purchase from MedImmune, quantities of the Licensed Antibody or Licensed Product, in any of its forms, for use by Kolltan, for commercial sale (“Commercial Supply Agreement”); and
(b) if (i) for any reason the Parties have not entered into the Commercial Supply Agreement (including if Kolltan has not requested that the Parties undertake negotiations with respect to thereto pursuant to Section 3.6.4(a)) or (ii) the Commercial Supply Agreement is entered into by the Parties but expires or is terminated for any reason other than breach by Kolltan, without limitation of any other rights that may be available to Kolltan, upon Kolltan’s written request and subject to MedImmune’s good faith consent as described below, MedImmune shall (x) transfer and/or disclose to Kolltan or any Qualified Contract Manufacturer designated in good faith by Kolltan such MedImmune Manufacturing Know-How and (y) provide to Kolltan or such Qualified Contract Manufacturer such technical assistance, in each case ((x) and (y)) as reasonably required for Kolltan or such Qualified Contract Manufacturer to Manufacture the Licensed Antibody and Licensed Products for use in Kolltan’s Commercialization activities hereunder. The foregoing sentence notwithstanding, except as set forth in Section 3.6.5 below, MedImmune has no obligation to disclose to Kolltan or any Qualified Contract Manufacturer the MedImmune Manufacturing Know How related to MedImmune proprietary cell culture media and nutrient feeds used in the Manufacturing process. Kolltan acknowledges and agrees that any transfer and/or disclosure by Kolltan of any MedImmune Manufacturing Know-How described in the immediately preceding sentence to a Third Party shall require the prior written consent of MedImmune; provided, however, that (A) MedImmune shall not unreasonably withhold such consent and (B) MedImmune’s determination as to whether to provide such consent shall be made in good faith. The transfers and disclosures described in clause (x) above shall be made (1) in any manner or form reasonably requested by Kolltan and (2) at MedImmune’s expense; provided, however, if at Kolltan’s request any such transfer or disclosure is made in any manner or form that is not reasonably standard in the biopharmaceutical industry for transfers or disclosures of a similar kind, such transfer or disclosure shall be made at Kolltan’s expense. The assistance described in clause (y) above shall be provided at MedImmune’s expense, provided, however, that the scope of such assistance will be limited to reasonable and customary assistance related to technology transfer under similar circumstances in the biologics industry.
Nonexclusivity, Etc The rights of the Indemnitee hereunder shall be in addition to any other rights Indemnitee may have under the Company's Amended and Restated Bylaws or the Delaware General Corporation Law or otherwise. To the extent that a change in the Delaware General Corporation Law (whether by statute or judicial decision) permits greater indemnification by agreement than would be afforded currently under the Company's Amended and Restated Bylaws and this Agreement, it is the intent of the parties hereto that Indemnitee shall enjoy by this Agreement the greater benefits so afforded by such change.
Musculoskeletal Injury Prevention and Control The hospital in consultation with the Joint Health and Safety Committee (JHSC) shall develop, establish and put into effect, musculoskeletal prevention and control measures, procedures, practices and training for the health and safety of employees.
SOURCE CODE ESCROW FOR LICENSED PRODUCT If Source Code or Source Code escrow is offered by either Contractor or Product manufacturer or developer to any other commercial customers, Contractor shall either: (i) provide Licensee with the Source Code for the Product; or (ii) place the Source Code in a third party escrow arrangement with a designated escrow agent who shall be named and identified to the State, and who shall be directed to release the deposited Source Code in accordance with a standard escrow agreement acceptable to the State; or (iii) will certify to the State that the Product manufacturer/developer has named the State, acting by and through the Authorized User, and the Licensee, as a named beneficiary of an established escrow arrangement with its designated escrow agent who shall be named and identified to the State and Licensee, and who shall be directed to release the deposited Source Code in accordance with the terms of escrow. Source Code, as well as any corrections or enhancements to such source code, shall be updated for each new release of the Product in the same manner as provided above and such updating of escrow shall be certified to the State in writing. Contractor shall identify the escrow agent upon commencement of the Contract term and shall certify annually that the escrow remains in effect in compliance with the terms of this clause. The State may release the Source Code to Licensees under this Contract who have licensed Product or obtained services, who may use such copy of the Source Code to maintain the Product.
License Term The license term shall commence upon the License Effective Date, provided, however, that where an acceptance or trial period applies to the Product, the License Term shall be extended by the time period for testing, acceptance or trial.
