Annexation into City Limits Sample Clauses

Annexation into City Limits. Within 30 days of the Tract’s Removal, the Developers shall submit to the City a petition, in substantially the form attached hereto and incorporated herein in full, signed by all entities with a right to purchase, or with ownership of, the Tract or any portion thereof not then within the City’s corporate limits, requesting that all land included in the Tract that is not then located within the City’s corporate limits be annexed into those limits by the City. Developers shall submit a current title report showing the record owner(s) and all encumbrances on the Tract. Developers agree to obtain such additional title reports and petitions for annexation, such as petitions from lienholders on the Tract, as the City deems necessary or advisable after review of the title report or at any other time. Such additional petitions shall be substantially in the form attached hereto and shall be submitted to the City within thirty days of receipt of a request from the City. If the petition, title report, and/or additional petitions, if any, are not submitted timely, the City may refuse to issue any further building permits or plat approvals for the Tract. The City shall promptly act to approve the petitions and complete the annexation of the Tract. The intent of this Agreement is to obligate the Developers to deliver all annexation petitions necessary for the City to annex the Tract.
Sample 1
AutoNDA by SimpleDocs

Related to Annexation into City Limits

  • Please see the current Washtenaw Community College catalog for up-to-date program requirements Conditions & Requirements

  • CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes

  • 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, glass, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes

  • Floor Plans The Design Professional shall prepare floor plans showing spaces by name, number, actual net area of each space, structural module, mechanical spaces, equipment, chases and circulation area. The Design Professional shall also prepare site plans (which show utilities), plumbing, electrical, mechanical, and structural plans, and equipment layouts, lists and schedules. Drawings shall show overall building dimensions and major lines of dimension.

  • Monetary Limitations The Buyer shall have no obligation to indemnify the Seller Indemnified Persons in respect of Losses arising from the breach of, or inaccuracy in, any representation or warranty pursuant to Section 10.2.1(a) or Losses arising from the breach of any covenant or agreement to be performed prior to Closing pursuant to Section 10.2.1(b), unless the aggregate amount of all such Losses incurred or suffered by the Seller Indemnified Persons exceeds the Threshold Amount, in which case the Buyer shall indemnify the Seller Indemnified Persons for all such Losses, including the Threshold Amount, and not only to the extent such Losses exceed the Threshold Amount, and the Buyer’s aggregate Liability in respect of Indemnification Claims arising from the breach of, or inaccuracy in, any representation or warranty pursuant to Section 10.2 1(a) and Indemnification Claims brought after Closing arising from the breach of any covenant or agreement to be performed prior to the Closing pursuant to Section 10.2.1(b) will not exceed Three Million Dollars ($3,000,000); provided, however, that the foregoing monetary limitations in this Section 10.2.2 will not apply to Indemnification Claims pursuant to Sections 10.2.1(a) in respect of breaches of, or inaccuracies in, representations and warranties set forth in Sections 5.1 (Organization), 5.2 (Power and Authorization), 5.4(e) (Breach of Organizational Documents) or 5.6 (No Brokers). Indemnification Claims pursuant to Sections 10.2.1(c) or 10.2.1(d), or for Losses arising from the breach of any covenant or agreement to be performed by the Buyer after the Closing pursuant to Section 10.2.l(b), are not subject to the monetary limitations set forth in this Section 10.2.2.

  • Unbundled Loop Modifications (Line Conditioning 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Subloop that may diminish the capability of the Loop or Subloop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the BellSouth’s TR 73600 Unbundled Local Loop Technical Specification. 2.5.2 BellSouth will remove load coils only on copper Loops and Subloops that are less than eighteen thousand (18,000) feet in length. 2.5.3 For any copper loop being ordered by NewPhone which has over six thousand (6,000) feet of combined bridged tap will be modified, upon request from NewPhone, so that the loop will have a maximum of six thousand (6,000) feet of bridged tap. This modification will be performed at no additional charge to NewPhone. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper Loop that will result in a combined total of bridged tap between two thousand five hundred (2,500) and six thousand (6,000) feet will be performed at the rates set forth in Exhibit A. 2.5.4 NewPhone may request removal of any unnecessary and non-excessive bridged tap (bridged tap between zero (0) and two thousand five hundred (2,500) feet which serves no network design purpose), at rates pursuant to BellSouth’s SC Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If NewPhone requests ULM on a reserved facility for a new Loop order, BellSouth may perform a pair change and provision a different Loop facility in lieu of the reserved facility with ULM if feasible. The Loop provisioned will meet or exceed specifications of the requested Loop facility as modified. NewPhone will not be charged for ULM if a different Loop is provisioned. For Loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the Loop provisioned. 2.5.8 NewPhone shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that NewPhone desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for NewPhone, NewPhone will submit a SI to BellSouth. If a spare Loop facility that meets the Loop modification specifications requested by NewPhone is available at the location for which the ULM was requested, NewPhone will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, NewPhone will not be charged for ULM but will only be charged the service order charges for submitting an order.

  • Standard Hazard and Flood Insurance Policies For each Mortgage Loan (other than a Cooperative Loan), the Master Servicer shall maintain, or cause to be maintained by each Servicer, standard fire and casualty insurance and, where applicable, flood insurance, all in accordance with the provisions of this Agreement and the related Servicing Agreement, as applicable. It is understood and agreed that such insurance shall be with insurers meeting the eligibility requirements set forth in the applicable Servicing Agreement and that no earthquake or other additional insurance is to be required of any Mortgagor or to be maintained on property acquired in respect of a defaulted loan, other than pursuant to such applicable laws and regulations as shall at any time be in force and as shall require such additional insurance. Pursuant to Section 4.01, any amounts collected by the Master Servicer, or by any Servicer, under any insurance policies maintained pursuant to this Section 9.16 or any Servicing Agreement (other than amounts to be applied to the restoration or repair of the property subject to the related Mortgage or released to the Mortgagor in accordance with the applicable Servicing Agreement) shall be deposited into the Collection Account, subject to withdrawal pursuant to Section 4.02. Any cost incurred by the Master Servicer or any Servicer in maintaining any such insurance if the Mortgagor defaults in its obligation to do so shall be added to the amount owing under the Mortgage Loan where the terms of the Mortgage Loan so permit; provided, however, that the addition of any such cost shall not be taken into account for purposes of calculating the distributions to be made to Certificateholders and shall be recoverable by the Master Servicer or such Servicer pursuant to Section 4.02.

  • Soldiers' and Sailors' Civil Relief Act The Mortgagor has not notified the Seller, and the Seller has no knowledge of any relief requested or allowed to the Mortgagor under the Relief Act or any similar state statute;

  • Standard Hazard Insurance and Flood Insurance Policies (a) For each Mortgage Loan, the Master Servicer shall enforce any obligation of the Servicers under the related Servicing Agreements to maintain or cause to be maintained standard fire and casualty insurance and, where applicable, flood insurance, all in accordance with the provisions of the related Servicing Agreements. It is understood and agreed that such insurance shall be with insurers meeting the eligibility requirements set forth in the applicable Servicing Agreement and that no earthquake or other additional insurance is to be required of any Mortgagor or to be maintained on property acquired in respect of a defaulted loan, other than pursuant to such applicable laws and regulations as shall at any time be in force and as shall require such additional insurance. (b) Pursuant to Section 4.01 and 4.02, any amounts collected by the Servicers or the Master Servicer, or by any Servicer, under any insurance policies (other than amounts to be applied to the restoration or repair of the property subject to the related Mortgage or released to the Mortgagor in accordance with the applicable Servicing Agreement) shall be deposited into the Master Servicer Collection Account, subject to withdrawal pursuant to Section 4.02 and 4.03. Any cost incurred by the Master Servicer or any Servicer in maintaining any such insurance if the Mortgagor defaults in its obligation to do so shall be added to the amount owing under the Mortgage Loan where the terms of the Mortgage Loan so permit; provided, however, that the addition of any such cost shall not be taken into account for purposes of calculating the distributions to be made to Certificateholders and shall be recoverable by the Master Servicer or such Servicer pursuant to Section 4.02 and 4.03.

  • DOMESTIC PREFERENCES FOR PROCUREMENTS To the extent applicable, Supplier certifies that during the term of this Contract will comply with applicable requirements of 2 C.F.R. § 200.322.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!