Application Fee Prior to the Resident being accepted to The Residence, a non-refundable Application Fee of $100 must be made. This Application Fee applies to each application and is not refundable in the event of cancellation or withdrawal of the Resident’s application. The amount of the Application Fee is detailed in Table 4.
Application of Agreement 4.1 This Agreement applies to:
(a) Xxxxx Fabrications Pty Ltd (the Employer)
(b) the CFMEU (the Union)
(c) all Employees of the Employer engaged in construction work and for whom classifications and rates of pay are provided by this Agreement (the Employee). Collectively known as Parties
4.2 This Agreement only applies to work done in Queensland or Northern Territory and to work temporarily done outside Queensland or Northern Territory by Employees who are based in Queensland or Northern Territory, except where employees are covered by a subsequent Greenfields agreement made under s.182(3) of the Fair Work Act 2009 (Cth) and approved by the Fair Work Commission.
Application of Payments and Collections All items of payment received by Agent by 12:00 noon, Chicago, Illinois, time, on any Business Day shall be deemed received on that Business Day. All items of payment received after 12:00 noon, Chicago, Illinois, time, on any Business Day shall be deemed received on the following Business Day. Borrower irrevocably waives the right to direct the application of any and all payments and collections at any time or times hereafter received by Agent from or on behalf of Borrower, and Borrower does hereby irrevocably agree that Agent shall have the continuing exclusive right to apply and reapply any and all such payments and collections received at any time or times hereafter by Agent or its agent against the Obligations, in such manner as Agent may deem advisable, notwithstanding any entry by Agent or any Lender upon any of its books and records. Amounts received by the Agent shall be for further credit to the accounts of Lenders pursuant to the settlement procedures contained in subsection 3.1.3 of this Agreement. Notwithstanding the foregoing, payments and collections shall not be applied to Obligations consisting of Derivative Obligations or Product Obligations at any time that any other Obligations are then due and payable. If as the result of collections of Accounts as authorized by subsection 6.2.4 hereof or otherwise, a credit balance exists in the Loan Account, such credit balance shall not accrue interest in favor of Borrower, but shall be disbursed to Borrower or otherwise at Borrower's direction in the manner set forth in subsection 3.1.2, upon Borrower's request at any time, so long as no Default or Event of Default then exists. Agent may at its option, offset such credit balance against any of the Obligations upon and during the continuance of an Event of Default.
Application to Repayment Amounts (i) Subject to clause (ii) of this Section 5.2(c), the first proviso to Section 5.2(a)(i) and the first proviso to Section 5.2(a)(ii), (A) each prepayment of Term Loans required by Sections 5.2(a)(i) and (ii) (other than in connection with a Debt Incurrence Prepayment Event) shall be allocated to the Classes of Term Loans outstanding, pro rata, based upon the applicable remaining Repayment Amounts due in respect of each such Class of Term Loans (excluding any Class of Term Loans that has agreed to receive a less than pro rata share of any such mandatory prepayment and taking into account any reduction in the amount of any required Excess Cash Flow payment to any Class of Term Loans that have been subject to a Section 13.6(g) transaction), shall be applied pro rata to Lenders within each Class, based upon the outstanding principal amounts owing to each such Lender under each such Class of Term Loans and shall be applied to reduce such scheduled Repayment Amounts within each such Class in accordance with Section 5.2(d)(ii) and (B) each prepayment of Term Loans required by Section 5.2(a)(i) in connection with a Debt Incurrence Prepayment Event shall be allocated to any Class of Term Loans outstanding as directed by the Borrower (subject to the requirement that the proceeds of any Specified Debt Incurrence Prepayment Event shall in all cases be applied to prepay or repay the applicable Refinanced Indebtedness), shall be applied pro rata to Lenders within each such Class, based upon the outstanding principal amounts owing to each such Lender under each such Class of Term Loans and shall be applied to reduce such scheduled Repayment Amounts within each such Class in accordance with Section 5.2(d)(ii); provided that, with respect to the allocation of such prepayments under clause (A) above only, between an Existing Term Loan Class and Extended Term Loans of the same Extension Series, the Borrower may allocate such prepayments as the Borrower may specify, subject to the limitation that the Borrower shall not allocate to Extended Term Loans of any Extension Series any such mandatory prepayment under such clause (A) unless such prepayment is accompanied by at least a pro rata prepayment, based upon the applicable remaining Repayment Amounts due in respect thereof, of the Term Loans of the Existing Term Loan Class, if any, from which such Extended Term Loans were converted or exchanged (or such Term Loans of the Existing Term Loan Class have otherwise been repaid in full).
(ii) With respect to each such prepayment required by Section 5.2(a)(i) and Section 5.2(a)(ii) (other than any Debt Incurrence Prepayment Event), (A) the Borrower will, not later than the date specified in Section 5.2(a) for offering to make such prepayment, give the Administrative Agent, written notice requesting that the Administrative Agent provide notice of such prepayment to each Lender and the Administrative Agent will promptly provide such notice to each Lender, (B) other than if such prepayment arises due to a Specified Debt Incurrence Prepayment Event, each Lender of Term Loans will have the right to refuse any such prepayment by giving written notice of such refusal to the Administrative Agent and the Borrower within three Business Days after such Lender’s receipt of notice from the Administrative Agent of such prepayment, and to the extent any such prepayment is so refused, such amounts may be retained by the Borrower (the “Retained Refused Proceeds”) and (C) the Borrower will make all such prepayments not so refused upon the tenth Business Day after the Lender received first notice of repayment from the Administrative Agent.
Application for Payment The form acceptable to Owner that is to be used by the Contractor during the course of the Work in requesting payment from the Owner and that is to be accompanied by such supporting documentation as is required by the Contract Documents.
Application Form To apply for a pole attachment or conduit occupancy license under this Agreement, Applicant shall submit to SWBT two signed copies of the appropriate application forms. SWBT represents that the forms specified in subsections (a)-(b) are forms in use prior to the effective date of this Agreement and that SWBT is in the process of revising such forms to conform to the provisions of this Agreement and to streamline the application process. The parties therefore agree that the forms specified in subsections (a) and (b) will be interim forms only. SWBT reserves the right to change the format and content of these forms upon 60 days written notice to Applicant.
(a) To apply for a pole attachment license, Applicant shall submit to SWBT two signed copies of SWBT’s Form SW-9434 (“Access Application and Make- Ready Authorization”) together with completed Form SW-9433 (“Pole Attachments”). An application for a pole attachment license will not be complete or subject to processing by SWBT until these forms have been submitted to SWBT; provided, however, that such forms will be deemed to be substantially complete if they contain the information specified in subsections (c)-(h) below, as applicable. Copies of Forms SW-9433 and SW-9434 are attached to this Agreement as parts of APPENDIX III.
(b) To apply for a conduit occupancy license, Applicant shall submit to SWBT two signed copies of SWBT’s Form SW-9434 (“Access Application and Make-Ready Authorization”) together with completed Form SW-9435 (“Conduit Occupancy”). An application for a conduit occupancy license will not be complete or subject to processing by SWBT until these forms have been submitted to SWBT; provided, however, that such forms will be deemed to be substantially complete if they contain the information specified in subsections (c)-(h) below, as applicable. Copies of Forms SW-9434 and SW-9435 are attached to this Agreement as parts of APPENDIX III.
(c) Each application for a license under this Agreement shall include, at a minimum, the following information:
(1) the poles, ducts, and conduits (including all manholes) along Applicant’s proposed route to or within which Applicant desires to attach or place its facilities;
(2) a description of the facilities to be attached to SWBT’s poles and a description of the facilities to be placed within each component of SWBT’s conduit system (including but not limited to ducts, conduits, manholes, and handholes) along the proposed route;
(3) for poles, the proposed points of attachment;
(4) for building entrance or building distribution ducts or conduits or other space within a building, a conspicuous statement, as required by Section 5.06 of this Agreement, that the application pertains to a building entrance or building distribution duct or conduit or other space within a building;
(5) if applicable, a conspicuous notation that the space requested is not to be assigned (or billed) to Applicant until SWBT has received Applicant’s written instruction to make such assignment or issued a license authorizing Applicant to occupy the space requested; and
(6) if applicable, a conspicuous statement that Applicant intends to occupy the space before the issuance of a license, as provided in Section 8.03 of this Agreement.
(d) Facilities descriptions which apply to multiple pole attachments or conduit occupancies need only be described once on any form. Facilities descriptions shall include, at a minimum, the following information:
(1) the number and types of cables, including the physical size (diameter) and weight (weight per foot);
(2) the number and types of strands, if any, which will be used to support the cables, including the rated holding capacity expressed in thousand pound increments (e.g., 2.2M) of such strands; and
(3) sufficient information to identify and describe the physical characteristics (size, dimensions, and weight) of apparatus enclosures and other facilities to be attached to SWBT’s poles or placed in SWBT’s conduit system.
(e) When it appears to Applicant that facilities modification, capacity expansion, or make-ready work may be required to accommodate Applicant’s access requests, Applicant shall describe the facilities modification, capacity expansion, or make-ready work which Applicant proposes. Applicant shall also describe its plans, if any, to use any infrequent construction technique or connectivity solution authorized under Section 6.03 to avoid high or unusual expenditures and state its reasons for the use of such technique or solution.
(f) Applicant acknowledges that the poles along a particular pole line or route may include poles owned by firms (such as electric utilities) other than SWBT, that it may be necessary for SWBT to rearrange its facilities or perform other make-ready work on poles other than poles it owns or controls in order to accommodate Applicant’s request for access to SWBT’s poles and that, at the time an application is submitted, it may be difficult for Applicant to determine with certainty whether a particular pole is owned or controlled by SWBT or by another entity. Accordingly, the application shall, to the extent feasible, identify all poles utilized by SWBT (without regard to ownership) along Applicant’s proposed route.
(g) Each application for a license under this Agreement shall be accompanied by a construction schedule showing Applicant’s projected dates for beginning and completing construction at the sites specified in the application. Information on this schedule may be used by SWBT’s engineering and outside plant construction personnel in scheduling work required to process Applicant’s applications and scheduling such capacity expansions, make- ready work, and facilities modifications, if any, as may be necessary to accommodate Applicant’s facilities.
(h) Applicant may include multiple cables in a single license application and may provide multiple services (e.g., CATV and non-CATV services) under the same cable sheath or jacket. When both CATV and non-CATV services are provided under the same cable sheath or jacket, or CATV and non-CATV services are provided using different cables attached or lashed to the same strand or otherwise occupying the same space on a pole or the same duct or inner duct within a conduit, Applicant will so advise SWBT and SWBT shall, if permitted by law, adjust its charges to enable SWBT to charge Applicant the rate applicable to telecommunications carriers rather than the rate applicable to cable television systems solely to provide cable service.
Application to Master Agreement For the avoidance of doubt, Clause 21.5 does not apply in respect of sums due from the Borrower to the Swap Bank under or in connection with the Master Agreement as to which sums the provisions of section 8 (Contractual Currency) of the Master Agreement shall apply.
Disbursement Requests Except as expressly provided in the Credit Agreement, Administrative Agent must receive Disbursement Requests in writing. Disbursement Requests will only be accepted from the applicable Authorized Representatives designated in the Disbursement Instruction Agreement. Disbursement Requests will be processed subject to satisfactory completion of Administrative Agent’s customer verification procedures. Administrative Agent is only responsible for making a good faith effort to execute each Disbursement Request and may use agents of its choice to execute Disbursement Requests. Funds disbursed pursuant to a Disbursement Request may be transmitted directly to the Receiving Bank, or indirectly to the Receiving Bank through another bank, government agency, or other third party that Administrative Agent considers to be reasonable. Administrative Agent will, in its sole discretion, determine the funds transfer system and the means by which each Disbursement will be made. Administrative Agent may delay or refuse to accept a Disbursement Request if the Disbursement would: (i) violate the terms of this Agreement; (ii) require use of a bank unacceptable to Administrative Agent or Lenders or prohibited by government authority; (iii) cause Administrative Agent or Lenders to violate any Federal Reserve or other regulatory risk control program or guideline; or (iv) otherwise cause Administrative Agent or Lenders to violate any applicable law or regulation.
Application Process The employees wishing to enter into a job share arrangement will apply in writing to the Employer and forward a copy to the Union outlining the proposed commencement date of the job share, how the hours and days of work will be shared and how communication and continuity of work will be maintained. The Employer shall communicate a decision on a job share request in writing to the applicants. Applications to Job Sharing shall not be unreasonably denied.
Application of Collections All collections for the Collection Period shall be applied by the Servicer as follows:
(a) With respect to each Receivable (other than a Purchased Receivable or a Sold Receivable), payments by or on behalf of the Obligor, (other than Supplemental Servicing Fees with respect to such Receivable, to the extent collected) shall be applied to interest and principal in accordance with the Simple Interest Method.
(b) All amounts collected that are payable to the Servicer as Supplemental Servicing Fees hereunder shall be deposited in the Collection Account and paid to the Servicer in accordance with Section 5.7(a).
