Common use of Cargo Preference Clause in Contracts

Cargo Preference. Applicability: Contracts involving equipment, materials or commodities which may be transported by ocean vessels. Contractor shall abide by the provisions of 46 CFR 381 as follows: Use privately owned US-Flag commercial vessels to ship at least 50% of the gross tonnage (computed separately for dry bulk carriers, dry cargo liners, and tankers) involved, whenever shipping any equipment, material, or commodities pursuant to the underlying contract to the extent such vessels are available at fair and reasonable rates for US flag commercial vessels; and Furnish within 20 working days following the loading date of shipments originating within the US or within 30 working days following the loading date of shipments originating outside the US, a legible copy of a rated, "on-board" commercial bill-of-lading in English for each shipment of cargo described herein to the Division of National Cargo, Office of Market Development, Maritime Administration, Washington, DC 20590 and to STA (through contractor in the case of a subcontractor's bill-of-lading.); and include these requirements in all subcontracts issued pursuant to this Contract when the subcontract involves the transport of equipment, material, or commodities by ocean vessel. Applicability: Architectural & Engineering contracts; Construction contracts for new buildings or additions to existing buildings. Contractor agrees that any new building or addition to an existing building shall be designed and constructed in accordance with the standards required in DOT Seismic Safety Regulations 49 CFR 41 and shall certify compliance to the extent required by the regulation. Contractor shall also ensure that all work performed under this Contract, including work performed by subcontractors, complies with the standards required by 49 CFR 41 and the certification of compliance issued on the project. Applicability: All contracts. Contractor shall comply with mandatory standards and policies relating to energy efficiency stated in the Washington State energy conservation plan issued in compliance with the Energy Policy & Conservation Act (42 USC 6201 et seq.), and perform an energy assessment for any buildings constructed or altered in accordance with FTA Requirements for Energy Assessments, at 49 CFR Part 622, subpart C. Applicability: All contracts and subcontracts over $150,000. Contractor shall comply with all applicable standards, orders or regulations issued pursuant to the Federal Water Pollution Control Act, as amended, 33 USC 1251 et seq. Contractor shall report each violation to STA and understands and agrees that STA shall, in turn, report each violation as required to FTA and the appropriate EPA Regional Office. Contractor shall include these requirements in each subcontract exceeding $150,000 financed in whole or in part with FTA assistance. Applicability: Rolling Stock purchase or lease contracts. Contractor [Manufacturer] shall comply with the Bus Testing requirements under 49 USC5318(e) and FTA's implementing regulation at 49 CFR Part 665 to ensure that the requisite testing is performed for all new bus models, or any bus model with a major change in configuration or components, and that the bus model has achieved a passing score. Upon completion of the testing, the Contractor [Manufacturer] shall obtain a copy of the bus testing reports from the operator of the testing facility and make the report(s) available to the public prior to final acceptance of the first vehicle by STA or another recipient.

Cargo Preference. Applicability: Contracts involving equipment, materials or commodities which may be transported by ocean vessels. Contractor shall abide by the provisions of 46 CFR 381 as follows: Use privately owned US-Flag commercial vessels to ship at least 50% of the gross tonnage (computed separately for dry bulk carriers, dry cargo liners, and tankers) involved, whenever shipping any equipment, material, or commodities pursuant to the underlying contract to the extent such vessels are available at fair and reasonable rates for US flag commercial vessels; and Furnish within 20 working days following the loading date of shipments originating within the US or within 30 working days following the loading date of shipments originating outside the US, a legible copy of a rated, "on-board" commercial bill-of-lading in English for each shipment of cargo described herein to the Division of National Cargo, Office of Market Development, Maritime Administration, Washington, DC 20590 and to STA (through contractor in the case of a subcontractor's bill-of-lading.); and include these requirements in all subcontracts issued pursuant to this Contract when the subcontract involves the transport of equipment, material, or commodities by ocean vessel. Applicability: Architectural & Engineering contracts; Construction contracts for new buildings or additions to existing buildings. Contractor agrees that any new building or addition to an existing building shall be designed and constructed in accordance with the standards required in DOT Seismic Safety Regulations 49 CFR 41 and shall certify compliance to the extent required by the regulation. Contractor shall also ensure that all work performed under this Contractcontract, including work performed by subcontractors, complies with the standards required by 49 CFR 41 and the certification of compliance issued on the project. Applicability: All contracts. Contractor shall comply with mandatory standards and policies relating to energy efficiency stated in the Washington State energy conservation plan issued in compliance with the Energy Policy & Conservation Act (42 USC 6201 et seq.), and perform an energy assessment for any buildings constructed or altered in accordance with FTA Requirements for Energy Assessments, at 49 CFR Part 622, subpart C. Applicability: All contracts and subcontracts over $150,000. Contractor shall comply with all applicable standards, orders or regulations issued pursuant to the Federal Water Pollution Control Act, as amended, 33 USC 1251 et seq. Contractor shall report each violation to STA and understands and agrees that STA shall, in turn, report each violation as required to FTA and the appropriate EPA Regional Office. Contractor shall include these requirements in each subcontract exceeding $150,000 financed in whole or in part with FTA assistance. Applicability: Rolling Stock purchase or lease contracts. Contractor [Manufacturer] shall comply with the Bus Testing requirements under 49 USC5318(e) and FTA's implementing regulation at 49 CFR Part 665 to ensure that the requisite testing is performed for all new bus models, or any bus model with a major change in configuration or components, and that the bus model has achieved a passing score. Upon completion of the testing, the Contractor [Manufacturer] shall obtain a copy of the bus testing reports from the operator of the testing facility and make the report(s) available to the public prior to final acceptance of the first vehicle by STA or another recipient.

Cargo Preference. Applicability: Contracts involving equipment, materials or commodities which may be transported by ocean vessels. Contractor shall abide by the provisions of 46 CFR 381 as follows: Use privately owned US-Flag commercial vessels to ship at least 50% of the gross tonnage (computed separately for dry bulk carriers, dry cargo liners, and tankers) involved, whenever shipping any equipment, material, or commodities pursuant to the underlying contract to the extent such vessels are available at fair and reasonable rates for US flag commercial vessels; and Furnish within 20 working days following the loading date of shipments originating within the US or within 30 working days following the loading date of shipments originating outside the US, a legible copy of a rated, "on-board" commercial bill-of-lading in English for each shipment of cargo described herein to the Division of National Cargo, Office of Market Development, Maritime Administration, Washington, DC 20590 and to STA (through contractor in the case of a subcontractor's bill-of-lading.); and include these requirements in all subcontracts issued pursuant to this Contract when the subcontract involves the transport of equipment, material, or commodities by ocean vessel. Applicability: Architectural & Engineering contracts; Construction contracts for new buildings or additions to existing buildings. Contractor agrees that any new building or addition to an existing building shall be designed and constructed in accordance with the standards required in DOT Seismic Safety Regulations 49 CFR 41 and shall certify compliance to the extent required by the regulation. Contractor shall also ensure that all work performed under this Contractcontract, including work performed by subcontractors, complies with the standards required by 49 CFR 41 and the certification of compliance issued on the project. Applicability: All contractsContracts. Contractor shall comply with mandatory standards and policies relating to energy efficiency stated in the Washington State energy conservation plan issued in compliance with the Energy Policy & Conservation Act (42 USC 6201 et seq.), and perform an energy assessment for any buildings constructed or altered in accordance with FTA Requirements for Energy Assessments, at 49 CFR Part part 622, subpart C. Applicability: All contracts Contracts and subcontracts over $150,000. Contractor shall comply with all applicable standards, orders or regulations issued pursuant to the Federal Water Pollution Control Act, as amended, 33 USC 1251 et seq. Contractor shall report each violation to STA and understands and agrees that STA shall, in turn, report each violation as required to FTA and the appropriate EPA Regional Office. Contractor shall include these requirements in each subcontract exceeding $150,000 financed in whole or in part with FTA assistance. Applicability: Rolling Stock purchase or lease contracts. Contractor [Manufacturer] shall comply with the Bus Testing requirements under 49 USC5318(e) and FTA's implementing regulation at 49 CFR Part part 665 to ensure that the requisite testing is performed for all new bus models, or any bus model with a major change in configuration or components, and that the bus model has achieved a passing score. Upon completion of the testing, the Contractor [Manufacturer] shall obtain a copy of the bus testing reports from the operator of the testing facility and make the report(s) available to the public prior to final acceptance of the first vehicle by STA or another recipient.

Cargo Preference. Applicability: Contracts involving equipment, materials or commodities which may be transported by ocean vessels. Contractor shall abide by the provisions of 46 CFR 381 as follows: Use privately owned US-Flag commercial vessels to ship at least 50% of the gross tonnage (computed separately for dry bulk carriers, dry cargo liners, and tankers) involved, whenever shipping any equipment, material, or commodities pursuant to the underlying contract to the extent such vessels are available at fair and reasonable rates for US flag commercial vessels; and Furnish within 20 working days following the loading date of shipments originating within the US or within 30 working days following the loading date of shipments originating outside the US, a legible copy of a rated, "on-board" commercial bill-of-lading in English for each shipment of cargo described herein to the Division of National Cargo, Office of Market Development, Maritime Administration, WashingtonXxxxxxxxxx, DC 20590 XX 00000 and to STA (through contractor in the case of a subcontractor's bill-of-lading.); and include these requirements in all subcontracts issued pursuant to this Contract when the subcontract involves the transport of equipment, material, or commodities by ocean vessel. Applicability: Architectural & Engineering contracts; Construction contracts for new buildings or additions to existing buildings. Contractor agrees that any new building or addition to an existing building shall be designed and constructed in accordance with the standards required in DOT Seismic Safety Regulations 49 CFR 41 and shall certify compliance to the extent required by the regulation. Contractor shall also ensure that all work performed under this Contractcontract, including work performed by subcontractors, complies with the standards required by 49 CFR 41 and the certification of compliance issued on the project. Applicability: All contractsContracts. Contractor shall comply with mandatory standards and policies relating to energy efficiency stated in the Washington State energy conservation plan issued in compliance with the Energy Policy & Conservation Act (42 USC 6201 et seq.), and perform an energy assessment for any buildings constructed or altered in accordance with FTA Requirements for Energy Assessments, at 49 CFR Part part 622, subpart C. Applicability: All contracts Contracts and subcontracts over $150,000. Contractor shall comply with all applicable standards, orders or regulations issued pursuant to the Federal Water Pollution Control Act, as amended, 33 USC 1251 et seq. Contractor shall report each violation to STA and understands and agrees that STA shall, in turn, report each violation as required to FTA and the appropriate EPA Regional Office. Contractor shall include these requirements in each subcontract exceeding $150,000 financed in whole or in part with FTA assistance. Applicability: Rolling Stock purchase or lease contracts. Contractor [Manufacturer] shall comply with the Bus Testing requirements under 49 USC5318(e) and FTA's implementing regulation at 49 CFR Part part 665 to ensure that the requisite testing is performed for all new bus models, or any bus model with a major change in configuration or components, and that the bus model has achieved a passing score. Upon completion of the testing, the Contractor [Manufacturer] shall obtain a copy of the bus testing reports from the operator of the testing facility and make the report(s) available to the public prior to final acceptance of the first vehicle by STA or another recipient.

Cargo Preference. Applicability: Contracts involving equipment, materials or commodities which may be transported by ocean vessels. Contractor shall abide by the provisions of 46 CFR 381 as follows: Use privately owned US-Flag commercial vessels to ship at least 50% of the gross tonnage (computed separately for dry bulk carriers, dry cargo liners, and tankers) involved, whenever shipping any equipment, material, or commodities pursuant to the underlying contract to the extent such vessels are available at fair and reasonable rates for US flag commercial vessels; and Furnish within 20 working days following the loading date of shipments originating within the US or within 30 working days following the loading date of shipments originating outside the US, a legible copy of a rated, "on-board" commercial bill-of-lading in English for each shipment of cargo described herein to the Division of National Cargo, Office of Market Development, Maritime Administration, Washington, DC 20590 and to STA (through contractor in the case of a subcontractor's bill-of-lading.); and include these requirements in all subcontracts issued pursuant to this Contract when the subcontract involves the transport of equipment, material, or commodities by ocean vessel. Applicability: Architectural & Engineering contracts; Construction contracts for new buildings or additions to existing buildings. Contractor agrees that any new building or addition to an existing building shall be designed and constructed in accordance with the standards required in DOT Seismic Safety Regulations 49 CFR 41 and shall certify compliance to the extent required by the regulation. Contractor shall also ensure that all work performed under this Contractcontract, including work performed by subcontractors, complies with the standards required by 49 CFR 41 and the certification of compliance issued on the project. Applicability: All contractsContracts. Contractor shall comply with mandatory standards and policies relating to energy efficiency stated in the Washington State energy conservation plan issued in compliance with the Energy Policy & Conservation Act (42 USC 6201 et seq.), and perform an energy assessment for any buildings constructed or altered in accordance with FTA Requirements for Energy Assessments, at 49 CFR Part 622, subpart C. Applicability: All contracts Contracts and subcontracts over $150,000. Contractor shall comply with all applicable standards, orders or regulations issued pursuant to the Federal Water Pollution Control Act, as amended, 33 USC 1251 et seq. Contractor shall report each violation to STA and understands and agrees that STA shall, in turn, report each violation as required to FTA and the appropriate EPA Regional Office. Contractor shall include these requirements in each subcontract exceeding $150,000 financed in whole or in part with FTA assistance. Applicability: Rolling Stock purchase or lease contracts. Contractor [Manufacturer] shall comply with the Bus Testing requirements under 49 USC5318(e) and FTA's implementing regulation at 49 CFR Part 665 to ensure that the requisite testing is performed for all new bus models, or any bus model with a major change in configuration or components, and that the bus model has achieved a passing score. Upon completion of the testing, the Contractor [Manufacturer] shall obtain a copy of the bus testing reports from the operator of the testing facility and make the report(s) available to the public prior to final acceptance of the first vehicle by STA or another recipient.

Cargo Preference. Applicability: Contracts involving equipment, materials or commodities which may be transported by ocean vessels. Contractor shall abide by the provisions of 46 CFR 381 as follows: Use privately owned US-Flag commercial vessels to ship at least 50% of the gross tonnage (computed separately for dry bulk carriers, dry cargo liners, and tankers) involved, whenever shipping any equipment, material, or commodities pursuant to the underlying contract to the extent such vessels are available at fair and reasonable rates for US flag commercial vessels; and Furnish within 20 working days following the loading date of shipments originating within the US or within 30 working days following the loading date of shipments originating outside the US, a legible copy of a rated, "on-board" commercial billxxxx-of-lading in English for each shipment of cargo described herein to the Division of National Cargo, Office of Market Development, Maritime Administration, WashingtonXxxxxxxxxx, DC 20590 XX 00000 and to STA (through contractor in the case of a subcontractor's billxxxx-of-lading.); and include these requirements in all subcontracts issued pursuant to this Contract when the subcontract involves the transport of equipment, material, or commodities by ocean vessel. Applicability: Architectural & Engineering contracts; Construction contracts for new buildings or additions to existing buildings. Contractor agrees that any new building or addition to an existing building shall be designed and constructed in accordance with the standards required in DOT Seismic Safety Regulations 49 CFR 41 and shall certify compliance to the extent required by the regulation. Contractor shall also ensure that all work performed under this Contractcontract, including work performed by subcontractors, complies with the standards required by 49 CFR 41 and the certification of compliance issued on the project. Applicability: All contractsContracts. Contractor shall comply with mandatory standards and policies relating to energy efficiency stated in the Washington State energy conservation plan issued in compliance with the Energy Policy & Conservation Act (42 USC 6201 et seq.), and perform an energy assessment for any buildings constructed or altered in accordance with FTA Requirements for Energy Assessments, at 49 CFR Part part 622, subpart C. Applicability: All contracts Contracts and subcontracts over $150,000. Contractor shall comply with all applicable standards, orders or regulations issued pursuant to the Federal Water Pollution Control Act, as amended, 33 USC 1251 et seq. Contractor shall report each violation to STA and understands and agrees that STA shall, in turn, report each violation as required to FTA and the appropriate EPA Regional Office. Contractor shall include these requirements in each subcontract exceeding $150,000 financed in whole or in part with FTA assistance. Applicability: Rolling Stock purchase or lease contracts. Contractor [Manufacturer] shall comply with the Bus Testing requirements under 49 USC5318(e) and FTA's implementing regulation at 49 CFR Part part 665 to ensure that the requisite testing is performed for all new bus models, or any bus model with a major change in configuration or components, and that the bus model has achieved a passing score. Upon completion of the testing, the Contractor [Manufacturer] shall obtain a copy of the bus testing reports from the operator of the testing facility and make the report(s) available to the public prior to final acceptance of the first vehicle by STA or another recipient.