CLEARANCES TO RAIL VEHICLES AND STRUCTURES Sample Clauses

CLEARANCES TO RAIL VEHICLES AND STRUCTURES. 5.10.1 Minimum Electrical Clearances, as specified in Table 5-1 and depicted in Figure 5-5, shall be maintained from exposed Energized Parts to Grounded parts of rail vehicles or structures. Table 5-1 25 kV ac Electrical Clearances Atmospheric Condition Minimum Clearance Static (CA) Passing/Dynamic (PA) Non-Polluted * 8 in. 6 in. Polluted * 10 in. 8 in. *: See AREMA Manual Chapter 33, Table 33-2-2 (2010) Note 1: In a 2x25 kV ac Electrification System, there is a 180 degree phase difference between Energized Parts common to the negative Feeder and those of the OCS. The minimum clearance between these elements is 21.5 inches under static conditions or 12 inches under worst case dynamic conditions. Note 2: Enhanced clearances or other protective measures may be required at locations where there is a high probability of incidents or vulnerable structures. Regardless, the maximum Practicable value of Electrical Clearance shall be provided.
AutoNDA by SimpleDocs

Related to CLEARANCES TO RAIL VEHICLES AND STRUCTURES

  • Vehicles and Equipment Consultant will furnish all vehicles, equipment, tools, and materials used to provide the Services required by this Agreement. Client will not require Consultant to rent or purchase any equipment, product, or service as a condition of entering into this Agreement.

  • BUILDINGS AND STRUCTURES 1. Repair or retrofit of buildings less than 45 years old.

  • Additional Requirements for Sleeping Rooms The Contractor shall provide departing Attendees a secured area for storing belongings.

  • Early Construction of Base Case Facilities Developer may request Connecting Transmission Owner to construct, and Connecting Transmission Owner shall construct, subject to a binding cost allocation agreement reached in accordance with Attachment S to the ISO OATT, including Section 25.8.7 thereof, using Reasonable Efforts to accommodate Developer’s In-Service Date, all or any portion of any System Upgrade Facilities or System Deliverability Upgrades required for Developer to be interconnected to the New York State Transmission System which are included in the Base Case of the Class Year Study for the Developer, and which also are required to be constructed for another Developer, but where such construction is not scheduled to be completed in time to achieve Developer’s In-Service Date.

  • GEOGRAPHIC AREA AND SECTOR SPECIFIC ALLOWANCES, CONDITIONS AND EXCEPTIONS The following allowances and conditions shall apply where relevant: Where the company does work which falls under the following headings, the company agrees to pay and observe the relevant respective conditions and/or exceptions set out below in each case.

  • Access to Property Borrower shall permit agents, representatives and employees of Lender to inspect the Property or any part thereof at reasonable hours upon reasonable advance notice.

  • Personnel Requirements and Documentation Grantee will;

  • Participating TO's Interconnection Facilities Construction The Participating TO's Interconnection Facilities shall be designed and constructed in accordance with Good Utility Practice. Upon request, within one hundred twenty (120) Calendar Days after the Commercial Operation Date, unless the Participating TO and Interconnection Customer agree on another mutually acceptable deadline, the Participating TO shall deliver to the Interconnection Customer and the CAISO the following “as-built” drawings, information and documents for the Participating TO's Interconnection Facilities [include appropriate drawings and relay diagrams]. The Participating TO will obtain control for operating and maintenance purposes of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades upon completion of such facilities. Pursuant to Article 5.2, the CAISO will obtain Operational Control of the Stand Alone Network Upgrades prior to the Commercial Operation Date.

  • ACCESS TO PLANTS AND PROPERTIES Seller shall comply with all the rules and regulations established by Buyer for access to and activities in and around premises controlled by Buyer or Buyer’s customer.

  • Authorization and Application of Overtime (a) An employee who is required to work overtime shall be entitled to overtime compensation when:

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!