Daily Send-Out Flexibility Sample Clauses

Daily Send-Out Flexibility. Each Day D-1 of the Week except for Friday, the Shipper that has a Send-Out according to the SMART rules may request a change to its Reference Send-Out for Day D. Each Day D-1 of the Week except for Friday, the Operator, acting as a Prudent and Reasonable Operator, shall make every effort to allocate to the Shipper that made a request to change its Reference Send-Out, a new Reference Send-Out as close as possible to its request for Day D, it being understood that the sum of these requests should comply with: o the operational constraints of the Terminal, o the limit of 123% of the Terminal Nominal Flow-Rate, o a technically and economically reasonable send-out range, o compatibility with the capacity of the Transmission System. The Flexibility for all of the shippers shall be distributed between them proportionally using the prorata of their send- out for the Day D. The Daily Send-Out shall be defined by the Operator in accordance with the Shipper's request and any technical constraints. In the event that the conditions stated above are not met, the Operator will make every effort, with the Shippers that have made a request to change their Reference Send-Out, to find a satisfactory solution and, as a last resort, shall define the new Reference Send-Outs by distributing the Flexibility available by using the prorata of their send-out for the Day D In the event that the request to change the Shipper's Reference Send-Out is accepted by the Operator, it shall provide a Monthly Schedule including the new Reference Send-Out for Day D. In the event of a request being made to the change the Windows of Arrival or the scheduled Quantities Unloaded or Reloaded prior to provision of the last Monthly Schedule, this request shall be processed as a priority over the request to change the Reference Send-Out.
AutoNDA by SimpleDocs

Related to Daily Send-Out Flexibility

  • Agreement Flexibility 8.1 An employer and employee covered by this enterprise agreement may agree to make an individual flexibility arrangement to vary the effect of terms of the agreement if: (a) the agreement deals with 1 or more of the following matters: (i) arrangements about when work is performed; (ii) overtime rates; (iii) penalty rates; (iv) allowances; (v) leave loading; and (b) the arrangement meets the genuine needs of the employer and employee in relation to 1 or more of the matters mentioned in paragraph (a); and (c) the arrangement is genuinely agreed to by the employer and employee. 8.2 The employer must ensure that the terms of the individual flexibility arrangement: (a) are about permitted matters under section 172 of the Fair Work Act 2009; and (b) are not unlawful terms under section 194 of the Fair Work Act 2009; and (c) result in the employee being better off overall than the employee would be if no arrangement was made. 8.3 The employer must ensure that the individual flexibility arrangement: (a) is in writing; and (b) includes the name of the employer and employee; and (c) is signed by the employer and employee and if the employee is under 18 years of age, signed by a parent or guardian of the employee; and (d) includes details of: (i) the terms of the enterprise agreement that will be varied by the arrangement; and (ii) how the arrangement will vary the effect of the terms; and (iii) how the employee will be better off overall in relation to the terms and conditions of his or her employment as a result of the arrangement; and (e) states the day on which the arrangement commences. 8.4 The employer must give the employee a copy of the individual flexibility arrangement within 14 days after it is agreed to. 8.5 The employer or employee may terminate the individual flexibility arrangement: (a) by giving no more than 28 days written notice to the other party to the arrangement; or (b) if the employer and employee agree in writing—at any time.

  • Flexibility 7.1 The Employer and an Employee covered by this Schedule may agree to make an individual flexibility arrangement to vary the effect of terms of this Schedule if: 7.1.1 the agreement deals with 1 or more of the following matters: (i) arrangements about when work is performed - such arrangements may be made to vary the operation of clause 24 Hours of Work; (ii) Salary Packaging – an employee may elect a salary packaging arrangement in accordance with clause 21 of this Schedule; and 7.1.2 the arrangement meets the genuine needs of the Employer and Employee in relation to 1 or more of the matters mentioned in 7.1.1; and 7.1.3 the arrangement is genuinely agreed to by the Employer and Employee. 7.2 The Employer must ensure that the terms of the individual flexibility arrangement: (i) are about permitted matters under section 172 of the Fair Work Act 2009; and (ii) are not unlawful terms under section 194 of the Fair Work Act 2009; and (iii) result in the Employee being better off overall than the Employee would be if no arrangement was made. 7.3 The Employer must ensure that the individual flexibility arrangement: 7.3.1 is in writing; and 7.3.2 includes the name of the Employer and Employee; and 7.3.3 is signed by the Employer and Employee and if the Employee is under 18 years of age, signed by a parent or guardian of the Employee; and 7.3.4 includes details of: (i) the terms of the Schedule that will be varied by the arrangement; and (ii) how the arrangement will vary the effect of the terms; and (iii) how the Employee will be better off overall in relation to the terms and conditions of his or her employment as a result of the arrangement; and 7.3.5 states the day on which the arrangement commences. 7.4 The Employer must give the Employee a copy of the individual flexibility arrangement within 14 days after it is agreed to. 7.5 The Employer or Employee may terminate the individual flexibility arrangement: 7.5.1 by giving no more than 28 days written notice to the other party to the arrangement; or 7.5.2 if the Employer and Employee agree in writing — at any time.

  • WORKPLACE FLEXIBILITY The employer must ensure that any Individual Flexibility Agreement (IFA) is genuinely agreed to by the employer and the employee and result in the employee being better off overall at the time the IFA is made than the employee would have been if no IFA had been agreed to. 8.1 Notwithstanding any other provision of the Agreement, the employer and an individual employee may agree to vary the application of certain terms of the Agreement to meet the genuine individual needs of the employer and the individual employee. The terms the employer and the individual employee may agree to vary are the application of those permitted under Section 172 of the FW Act, and relates only to:- 8.1.1 arrangements for when work is performed; 8.1.2 salary sacrifice arrangements; 8.1.3 reduction in ordinary hours; and 8.1.4 are not unlawful terms under Section 194 of the FW Act. 8.2 The employer and the individual employee must have genuinely made the IFA without coercion or duress. An IFA can only be entered into after the individual employee has commenced employment with the employer. 8.3 The IFA between the employer and the individual employee must: 8.3.1 be confined to a variation in the application of one or more of the terms listed in Clause 8.1; and 8.4 The IFA between the employer and the individual employee must also: 8.4.1 be in writing, name the parties to the IFA and be signed by the employer and the individual employee and, if the employee is under eighteen (18) years of age, the employee’s parent or guardian; 8.4.2 state each term of the Agreement that the employer and the individual employee have agreed to vary; 8.4.3 detail how the application of each term has been varied by agreement between the employer and the individual employee;

  • Local Circuit Switching Capability, including Tandem Switching Capability 4.1.3.1 Definition 4.1.3.2 Notwithstanding BellSouth’s general duty to unbundle local circuit switching, BellSouth shall not be required to unbundle local circuit switching for <<customer_name>> when <<customer_name>> serves end-users with four (4) or more voice-grade (DS-0) equivalents or lines in locations served by BellSouth’s local circuit switches, which are in the following MSAs: Atlanta, GA; Miami, FL; Orlando, FL; Ft. Lauderdale, FL; Charlotte-Gastonia-Rock Hill, NC; Greensboro-Winston Salem-High Point, NC; Nashville, TN; and New Orleans, LA, and BellSouth has provided non-discriminatory cost based access to the Enhanced Extended Link (EEL) throughout Density Zone 1 as determined by NECA Tariff No. 4 as in effect on January 1, 1999. 4.1.3.3 In the event that <<customer_name>> orders local circuit switching for a single end user account name at a single physical end user location with four (4) or more 2-wire voice-grade loops from a BellSouth central office in an MSA listed above, BellSouth shall charge <<customer_name>> the market based rate in Exhibit C for use of the local circuit switching functionality for the affected facilities. 4.1.3.4 A featureless port is one that has a line port, switching facilities, and an interoffice port. A featured port is a port that includes all features then capable or a number of then capable features specifically requested by <<customer_name>>. Any features that are not currently then capable but are technically feasible through the switch can be requested through the NBR/BFR process. 4.1.3.5 BellSouth will provide to <<customer_name>> customized routing of calls: (i) to a requested directory assistance services platform; (ii) to an operator services platform pursuant to Section 10 of Attachment 2; (iii) for <<customer_name>>’s PIC’ed toll traffic in a two (2) PIC environment to an alternative OS/DA platform designated by <<customer_name>>. <<customer_name>> customers may use the same dialing arrangements as BellSouth customers. 4.1.3.6 Remote Switching Module functionality is included in Switching Capability. The switching capabilities used will be based on the line side features they support. 4.1.3.7 Switching Capability will also be capable of routing local, intraLATA, interLATA, and calls to international customer’s preferred carrier; call features (e.g. call forwarding) and Centrex capabilities. 4.1.3.8 Where required to do so in order to comply with an effective Commission order, BellSouth will provide to <<customer_name>> purchasing local BellSouth switching and reselling BellSouth local exchange service under Attachment 1, selective routing of calls to a requested directory assistance services platform or operator services platform. <<customer_name>> customers may use the same dialing arrangements as BellSouth customers, but obtain a <<customer_name>> branded service.

  • Unbundled Channelization (Multiplexing) 5.7.1 To the extent NewPhone is purchasing DS1 or DS3 or STS-1 Dedicated Transport pursuant to this Agreement, Unbundled Channelization (UC) provides the optional multiplexing capability that will allow a DS1 (1.544 Mbps) or DS3 (44.736 Mbps) or STS-1 (51.84 Mbps) Network Elements to be multiplexed or channelized at a BellSouth central office. Channelization can be accomplished through the use of a multiplexer or a digital cross-connect system at the discretion of BellSouth. Once UC has been installed, NewPhone may request channel activation on a channelized facility and BellSouth shall connect the requested facilities via COCIs. The COCI must be compatible with the lower capacity facility and ordered with the lower capacity facility. This service is available as defined in NECA 4. 5.7.2 BellSouth shall make available the following channelization systems and interfaces: 5.7.2.1 DS1 Channelization System: channelizes a DS1 signal into a maximum of twenty- four (24)

  • EPP service availability Refers to the ability of the TLD EPP servers as a group, to respond to commands from the Registry accredited Registrars, who already have credentials to the servers. The response shall include appropriate data from the Registry System. An EPP command with “EPP command RTT” 5 times higher than the corresponding SLR will be considered as unanswered. If 51% or more of the EPP testing probes see the EPP service as unavailable during a given time, the EPP service will be considered unavailable.

  • Uptime bookinglab shall ensure that the Booking Service will be available, excluding Downtime caused by Scheduled Maintenance, Emergency Maintenance or Force Majeure event, 99.5% of the time in any one calendar month (first day to last day) (the “Service Level”). The Service Level will not apply (and therefore no Service Credits will be applicable) to the extent that any Service Level Failure is caused by: (a) a Penetration Test conducted by Customer without the prior written approval of bookinglab; or (b) Customer’s failure to comply with specific instructions provided by bookinglab; or (c) a failure of the Customer to comply with any Customer responsibility or obligation detailed in a Statement of Work, Order Form or the Master Subscription Agreement; or (d) Customer’s failure to adhere to JRNI’s or bookinglab’s best practice guidelines for the use of the API.

  • Service Availability You understand that Service availability is at all times conditioned upon the corresponding operation and availability of the communication systems used in communicating your instructions and requests to the Credit Union. We will not be liable or have any responsibility of any kind for any loss or damage thereby incurred by you in the event of any failure or interruption of such communication systems or services resulting from the act or omission of any third party, or from any other cause not reasonably within the control of the Credit Union.

  • MWBE Utilization Plan A. In accordance with 5 NYCRR § 142.4, Bidders are required to submit a completed Utilization Plan on Form MWBE 100 with their bid. B. The Utilization Plan shall list the MWBEs the Bidder intends to use to perform the Contract, a description of the Contract scope of work the Bidder intends the MWBE to perform to meet the goals on the Contract, and the estimated or, if known, actual dollar amounts to be paid to an MWBE. By signing the Utilization Plan, the Bidder acknowledges that making false representations or including information evidencing a lack of good faith as part of, or in conjunction with, the submission of a Utilization Plan is prohibited by law and may result in penalties including, but not limited to, termination of a contract for cause, loss of eligibility to submit future bids, and/or withholding of payments. Any modifications or changes to the agreed participation by New York State Certified MWBEs after the Contract award and during the term of the Contract must be reported on a revised MWBE Utilization Plan and submitted to OGS. C. By entering into the Contract, Bidder/Contractor understands that only sums paid to MWBEs for the performance of a commercially useful function, as that term is defined in 5 NYCRR § 140.1, may be applied towards the achievement of the applicable MWBE participation goal. When an MWBE is serving as a broker on the Contract, only 25 percent of all sums paid to a broker shall be deemed to represent the commercially useful function performed by the MWBE. D. OGS will review the submitted MWBE Utilization Plan and advise the Bidder of OGS acceptance or issue a notice of deficiency within 30 days of receipt. E. If a notice of deficiency is issued; Bidder agrees that it shall respond to the notice of deficiency, within 7 business days of receipt, by submitting to OGS a written remedy in response to the notice of deficiency. If the written remedy that is submitted is not timely or is found by OGS to be inadequate, OGS shall notify the Bidder and direct the Bidder to submit, within 5 business days of notification by OGS, a request for a partial or total waiver of MWBE participation goals on Form BDC 333. Failure to file the waiver form in a timely manner may be grounds for disqualification of the bid or proposal. F. OGS may disqualify a Vendors Submission as being non-responsive under the following circumstances: (a) If a Bidder fails to submit an MWBE Utilization Plan; (b) If a Bidder fails to submit a written remedy to a notice of deficiency; (c) If a Bidder fails to submit a request for waiver; or (d) If OGS determines that the Bidder has failed to document good faith efforts. G. If awarded a Contract, Contractor certifies that it will follow the submitted MWBE Utilization Plan for the performance of MWBEs on the Contract pursuant to the prescribed MWBE goals set forth in clause IV-A of this Section. H. Bidder/Contractor further agrees that a failure to submit and/or use such completed MWBE Utilization Plan shall constitute a material breach of the terms of the Contract. Upon the occurrence of such a material breach, OGS shall be entitled to any remedy provided herein, including but not limited to, a finding of Contractor non- responsiveness.

  • DNS service availability Refers to the ability of the group of listed-­‐as-­‐authoritative name servers of a particular domain name (e.g., a TLD), to answer DNS queries from DNS probes. For the service to be considered available at a particular moment, at least, two of the delegated name servers registered in the DNS must have successful results from “DNS tests” to each of their public-­‐DNS registered “IP addresses” to which the name server resolves. If 51% or more of the DNS testing probes see the service as unavailable during a given time, the DNS service will be considered unavailable.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!