Defects Liability Period 11 Sample Clauses

Defects Liability Period 11. 1.1. Duration The Supplier shall be liable for any Defects attributable to the Supplier on the Xxxx Equipment during a period of twenty four (24) months starting from the Commissioning Date and in any case for no more than thirty (30) months after the last Delivery Date of the Xxxx Equipment (the ″Defects Liability Period″). 11.1.2. Making good Defects 11.1. 2.1. during the Defects Liability Period, the Supplier shall be responsible for making good any Defect in any part of the Xxxx Equipment which: 11.
AutoNDA by SimpleDocs

Related to Defects Liability Period 11

  • Defects Liability Period (i) The Contractor shall be responsible for all the Defects and deficiencies, except usual wear and tear in the Project Highway or any Section thereof, till the expiry of a period of commencing from the date of Completion Certificate (the “Defects Liability Period”) as specified below: (a) 5 (five) years from the date of completion in case of a road being constructed with flexible pavement; (b) 10 (ten) years from the date of completion in case of road being constructed with rigid pavement; (c) 10 (ten) years from the date of completion in case of road being constructed with flexible pavement using perpetual design; (d) 10 (ten) years from the date of completion in case of all stand-alone structures, e.

  • Defects Liability 9.1 In this Contract, and subject to Clause 9.2, a defect shall mean any non-conformity of the Supplies with the express terms of this Contract resulting from circumstances existing in the Supplies at the time of the transfer of risk to the Customer (“Defects”). 9.2 In particular, the following shall not be Defects: a) normal wear and tear, non-conformity resulting from excessive strain, b) non-conformity resulting from faulty or negligent handling; non-compliance with instructions or recommendations in operation or maintenance manuals and other documents; c) installation, erection, modification, commissioning, or pre-commissioning, in each case not carried out by Xxxxxxx, d) non-reproducible software errors, e) defects which do not significantly impair the use of the respective Supplies. 9.3 The Customer shall immediately inspect the Supplies upon delivery and shall notify Flender in writing of any Defects without undue delay. The Customer’s claims in respect of defects shall be excluded for any apparent defects if the Customer has failed to do so. Upon such written notification, Flender shall, at its option, remedy a Defect by repair, replacement, or re-performance. Flender shall be given a reasonable period of time and opportunity to remedy the Defect. For this purpose, the Customer shall xxxxx Xxxxxxx working access to the non- conforming Supplies, shall undertake any necessary dis-assembly and re-assembly, and shall provide access to operation and maintenance data, all at no charge to Flender. Upon Flender’s request, the Customer shall ensure that the title to the replaced parts/items shall pass to Flender. 9.4 Unless otherwise agreed, the defects liability period for any part of the Supplies is 12 months. It starts at the date of transfer of risk. For replaced or repaired parts of the Supplies, the defects liability period is 6 months from the date of replacement or repair, if the original defects liability period for the Supplies expires earlier. In any event, the defects liability period shall end no later than 24 months from the beginning of the original defects liability period. 9.5 If software is defective, Flender shall only be obliged to provide the Customer with an updated version of the software in which the Defect has been remedied when such updated version is reasonably available from Flender or, if Flender is only licensee, from Flender’s licensor. If the software has been modified or individually developed by Flender, Flender shall in addition provide the Customer with a workaround or other interim corrective solution until the provision of an updated version of the software, if such workaround or interim solution is feasible at reasonable expense and if otherwise the Customer’s business operations would be substantially impeded. 9.6 If Flender carries out remedial work and it is ultimately not established that there was a Defect, the Customer shall pay Flender for such remedial work including error diagnosis. 9.7 Any other liability of Flender and rights and remedies of the Customer in case of defects of the Supplies, other than those expressly stipulated in this Clause 9 or , in case Flender failed at least three times in remedying the defect, in Clause 15.2b) shall be excluded. All warranties, representations, conditions, and all other terms of any kind whatsoever implied by statute or law are, to the fullest extent permitted by applicable law, excluded from this Contract.

  • DEFECT LIABILITY It is agreed that in case any structural defect or any other defect in workmanship, quality or provision of services or any other obligations of the Promoter as per the agreement for sale relating to such development is brought to the notice of the Promoter within a period of 5 (five) years by the Allottee from the date of handing over possession, it shall be the duty of the Promoter to rectify such defects without further charge, within 30 (thirty) days, and in the event of Promoter's failure to rectify such defects within such time, the aggrieved Allottees shall be entitled to receive appropriate compensation in the manner as provided under the Act.

  • Maximum Liability The provisions of this Loan Guaranty are severable, and in any action or proceeding involving any state corporate law, or any state, federal or foreign bankruptcy, insolvency, reorganization or other law affecting the rights of creditors generally, if the obligations of any Loan Guarantor under this Loan Guaranty would otherwise be held or determined to be avoidable, invalid or unenforceable on account of the amount of such Loan Guarantor’s liability under this Loan Guaranty, then, notwithstanding any other provision of this Loan Guaranty to the contrary, the amount of such liability shall, without any further action by the Loan Guarantors or the Lenders, be automatically limited and reduced to the highest amount that is valid and enforceable as determined in such action or proceeding (such highest amount determined hereunder being the relevant Loan Guarantor’s “Maximum Liability”. This Section with respect to the Maximum Liability of each Loan Guarantor is intended solely to preserve the rights of the Lenders to the maximum extent not subject to avoidance under applicable law, and no Loan Guarantor nor any other person or entity shall have any right or claim under this Section with respect to such Maximum Liability, except to the extent necessary so that the obligations of any Loan Guarantor hereunder shall not be rendered voidable under applicable law. Each Loan Guarantor agrees that the Guaranteed Obligations may at any time and from time to time exceed the Maximum Liability of each Loan Guarantor without impairing this Loan Guaranty or affecting the rights and remedies of the Lenders hereunder, provided that, nothing in this sentence shall be construed to increase any Loan Guarantor’s obligations hereunder beyond its Maximum Liability.

  • Products Liability (a) Except as set forth on Schedule 3.25, (i) there is no Action before any Governmental Entity pending, or to the Knowledge of the Seller, threatened against the Company involving any products manufactured, produced, distributed or sold by or on behalf of the Company and/or in connection with the Business (including any parts or components) (collectively, “Products”), or class of claims or lawsuits involving the same or similar Product which is pending or, to the Seller’s Knowledge, threatened, resulting from an alleged defect in design, manufacture, materials or workmanship of any Product, or any alleged failure to warn, or from any breach of implied warranties or representations (collectively, “Product Liability Lawsuits”); (ii) there has not been, within the past 12 months, any Occurrence (as hereinafter defined); and (iii) there has not been, within the past 12 months, any Product rework or retrofit (collectively, “Retrofits”) conducted by or on behalf of the Company. (b) For purposes of this Section 3.25, the term “Occurrence” shall mean any accident, happening or event which takes place at any time which is caused or allegedly caused by any alleged hazard or alleged defect in manufacture, design, materials or workmanship including, without limitation, any alleged failure to warn or any breach of express or implied warranties or representations with respect to, or any such accident, happening or event otherwise involving any Product that can reasonably be expected to result in a claim or loss. (c) Except as set forth on Schedule 3.25, to the Seller’s Knowledge, each Product manufactured, sold, leased, or delivered by the Company and the Business has been in conformity with all applicable material contractual commitments and all express and implied warranties, and the Company and the Business have no Liability (and there is no basis for any present or future proceeding against any of them giving rise to any Liability) for replacement or repair thereof or other damages in connection therewith. No Product manufactured, sold, leased, or delivered by the Company and the Business is subject to any guaranty, warranty, or other indemnity beyond the applicable standard terms and conditions of sale or lease. Schedule 3.25 includes copies of the standard terms and conditions of sale or lease for the Company and the Business (containing applicable guaranty, warranty, and indemnity provisions). Except as set forth on Schedule 3.25, the Seller and the Business have no obligation to any person to maintain, modify, improve or upgrade any of the Products. (d) Except as set forth on Schedule 3.25, to the Seller’s Knowledge, the Company and the Business have no material Liability (and there is no basis for any present or future proceeding against any the Company and the Business giving rise to any material Liability) arising out of any injury to individuals or property as a result of the ownership, possession, or use of any Product manufactured, sold, leased, or delivered by the Company and the Business.

  • Excess/Umbrella Liability Excess/umbrella liability insurance may be included to meet minimum requirements. Umbrella coverage must indicate the existing underlying insurance coverage.

  • Liability Limit THE REMEDY IN ANY CLAIM OR SUIT BY YOU AGAINST US WILL BE LIMITED TO DIRECT, ACTUAL DAMAGES, AND NEITHER NEXTERA ENERGY SERVICES OHIO, LLC NOR ANY OF ITS AFFILIATES WILL BE LIABLE FOR CONSEQUENTIAL, SPECIAL, INCIDENTAL, INDIRECT (INCLUDING LOSS OF PROFITS) OR PUNITIVE DAMAGES.

  • Excess Liability Developer will purchase and maintain excess liability insurance in an amount not less than $5,000,000.

  • Liability Limits (a) Notwithstanding anything to the contrary set forth herein, the Purchaser Indemnified Parties shall not make a claim against any Seller for indemnification under this Article IX for Purchaser Losses unless and until, and only to the extent that, the aggregate amount of such Purchaser Losses exceeds $450,000 (the “Purchaser Basket”), in which event the Purchaser Indemnified Parties may claim indemnification for all Purchaser Losses in excess of $450,000; provided, however, that Purchaser Losses related to Surviving Obligations shall not be subject to the Purchaser Basket nor shall they be included in calculating the Purchaser Basket. The total aggregate amount of the liability of Holdco and the Sellers for Purchaser Losses shall be limited to $11,000,000 (the “Purchaser Cap”); provided, however, that Purchaser Losses arising from Surviving Obligations shall not be subject to the Purchaser Cap. Notwithstanding anything to the contrary set forth herein, in no event shall the aggregate liability of the Sellers and Holdco for indemnification pursuant to this Article IX exceed the amount equal to the Maximum Cap. (b) The Purchaser Indemnified Parties shall not be entitled to indemnification under this Article IX for Purchaser Losses to the extent such Purchaser Losses were (i) reflected as a liability on the Final Working Capital Schedule or (ii) included on the Closing Date Expense Statement or the Closing Date Indebtedness Statement and, with respect to the foregoing clause (ii), were paid at Closing. (c) Any indemnification obligation of the Sellers pursuant to this Article IX shall be satisfied first from the Escrow Fund, and if the Escrow Fund is insufficient, at the sole discretion of the Purchaser, (a) by Holdco and/or (b) by each of the Sellers on a several and not joint basis; provided that: (i) each Non-Individual Seller’s liability for any Purchaser Loss shall not exceed such Non-Individual Seller’s Seller Percentage of such Purchaser Loss, and in the event a Non-Individual Seller indemnifies a Purchaser Indemnified Party for a Purchaser Loss, such indemnification payment shall, with respect to such Purchaser Loss, reduce, dollar-for-dollar, the indemnification limits under Section 9.5(c)(ii) or Section 9.5(c)(iii), as applicable, of the Individual Seller to which such Non-Individual Seller is a Related Party; (ii) each Individual Seller’s liability for any Purchaser Loss shall not exceed such Individual Seller’s Indemnification Percentage of such Purchaser Loss, and in the event that an Individual Seller indemnifies a Purchaser Indemnified Party in an amount equal to such Individual Seller’s Indemnification Percentage of such Purchaser Loss, the Purchaser Indemnified Party may not seek indemnification from such Individual Seller’s Related Parties as a result of such Purchaser Loss; and (iii) each Individual Seller is responsible for 100% of any Purchaser Loss arising under Section 9.1(a) with respect to a breach by such Individual Seller or such Individual Seller’s Related Party of any representation in Sections 5.1, 5.2, 5.3, 5.4, 5.5, 5.6, or 5.7. Notwithstanding the foregoing, the Purchaser may, at its sole discretion, set off any obligation of the Sellers for Purchaser Losses pursuant to this Article IX from any Earnout Amount payable to Holdco pursuant to the Earnout Agreement. In no event shall the Purchaser be entitled to use any of the funds held in the Escrow Fund to satisfy any of its indemnification obligations to any Seller Indemnified Party. (d) The amount of Purchaser Losses otherwise payable to the Purchaser Indemnified Parties pursuant to this Article IX shall be net of any insurance proceeds actually received by the Purchaser Indemnified Parties with respect to such Purchaser Losses under insurance policies maintained by the Company prior to the date hereof. (e) No Purchaser Loss or Seller Loss shall include punitive damages (unless required to be paid by the Indemnified Party in respect of a Third Party Claim).

  • Seller’s Liability SELLER’s liability with respect to the Product sold to END USER shall be limited to the warranty provided herein. SELLER shall not be subject to any other obligations or liabilities, whether arising out of breach of contract, warranty, tort (including negligence and strict liability) or other theories of law, with respect to products sold or services rendered by seller, or any undertaking, acts or omissions relating thereto. Without limiting the foregoing, SELLER specifically disclaims any liability for property or personal injury damages, penalties, special or punitive damages, damages for lost profits or revenues, services, down time, shut down or slow down costs, or for any other types of economic loss, and for claims of END USER’s customers or any third party for any such damages. SELLER shall not be liable for and disclaims all consequential, incidental and contingent damages whatsoever.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!