Defining Federal Wildlife Mitigation Obligations Sample Clauses

Defining Federal Wildlife Mitigation Obligations. To resolve wildlife mitigation and crediting issues related to the Willamette dams, all federal mitigation requirements for wildlife impacts associated with the Willamette dams will be based on acres as defined below. The Parties decided not to define wildlife mitigation based on habitat units to avoid the associated questions such as an appropriate crediting ratio and the need for a matrix to define and cross-reference species-habitat stacking issues. The Parties define the federal wildlife mitigation obligation in the Willamette Basin under the following terms.  Mitigation for the impacts of inundation, dam construction and all other non-operational aspects of the Willamette River hydropower system including above pool losses: The mitigation obligation for the acreage affected 3 The Parties do not anticipate maintenance activities to have further adverse affects on wildlife habitat, but if they do the Parties shall use the processes established in this Agreement and work with the Corps to address those impacts. by the construction and inundation of the Willamette dams, including above pool losses, is 25,537 acres.  Mitigation for operational losses: “Operational losses” are those that may be associated with the operation and maintenance of the dams. To address the issue of operational losses, the federal wildlife mitigation responsibility includes an additional 1,000 acres.  Total federal wildlife mitigation responsibility: The federal wildlife mitigation responsibility totals 26,537 acres.
Sample 1
AutoNDA by SimpleDocs
Defining Federal Wildlife Mitigation Obligations. To avoid longstanding debates involving use of the Habitat Evaluation Procedure and Habitat Units, the parties agree to use acreage to define Federal wildlife mitigation associated with the Albeni Falls Dam.2
Sample 1
Defining Federal Wildlife Mitigation Obligations. To avoid longstanding debates involving use of the Habitat Evaluation Procedure and Habitat Units, the Parties agree to use acreage to define Federal wildlife mitigation associated with southern Idaho dams.
Sample 1

Related to Defining Federal Wildlife Mitigation Obligations

  • Cooperation obligations The Parties undertake to cooperate to allow the timely submission, examination, publication and defence of any dissertation or thesis for a degree which includes their Results or Background subject to the confidentiality and publication provisions agreed in this Consortium Agreement.

  • Parallel Operation Obligations Once the Small Generating Facility has been authorized to commence parallel operation, the Interconnection Customer shall abide by all rules and procedures pertaining to the parallel operation of the Small Generating Facility in the applicable control area, including, but not limited to: (1) the rules and procedures concerning the operation of generation set forth in the NYISO tariffs or ISO Procedures or the Connecting Transmission Owner’s tariff; (2) any requirements consistent with Good Utility Practice or that are necessary to ensure the safe and reliable operation of the Transmission System or Distribution System; and (3) the Operating Requirements set forth in Attachment 5 of this Agreement.

  • Post-Termination Obligations All payments and benefits to Executive under this Agreement shall be subject to Executive's compliance with this Section 9 for one (1) full year after the earlier of the expiration of this Agreement or termination of Executive's employment with the Holding Company. Executive shall, upon reasonable notice, furnish such information and assistance to the Holding Company as may reasonably be required by the Holding Company in connection with any litigation in which it or any of its subsidiaries or affiliates is, or may become, a party.

  • Termination Obligations The Supplier shall comply with all of its obligations contained in the Exit Plan. Upon termination or expiry (as the case may be) or at the end of the Termination Assistance Period (or earlier if this does not adversely affect the Supplier's performance of the Ordered Panel Services and the Termination Assistance and its compliance with the other provisions of this Contract Schedule 2), the Supplier shall: cease to use the Customer Data; provide the Customer and/or the Replacement Supplier with a complete and uncorrupted version of the Customer Data in electronic form (or such other format as reasonably required by the Customer); erase from any computers, storage devices and storage media that are to be retained by the Supplier after the end of the Termination Assistance Period all Customer Data and promptly certify to the Customer that it has completed such deletion; return to the Customer such of the following as is in the Supplier's possession or control: all materials created by the Supplier under this Legal Services Contract in which the IPRs are owned by the Customer; any equipment which belongs to the Customer; any items that have been on-charged to the Customer, such as consumables; and any sums prepaid by the Customer in respect of Ordered Panel Services not delivered by the Expiry Date; vacate any Customer Premises; remove the Supplier Equipment together with any other materials used by the Supplier to supply the Ordered Panel Services and shall leave the sites in a clean, safe and tidy condition. The Supplier is solely responsible for making good any damage to the sites or any objects contained thereon, other than fair wear and tear, which is caused by the Supplier and/or any Supplier Personnel; provide access during normal working hours to the Customer and/or the Replacement Supplier for up to twelve (12) Months after expiry or termination to: such information relating to the Ordered Panel Services as remains in the possession or control of the Supplier; and such members of the Supplier Personnel as have been involved in the design, development and provision of the Ordered Panel Services and who are still employed by the Supplier, provided that the Customer and/or the Replacement Supplier shall pay the reasonable costs of the Supplier actually incurred in responding to requests for access under this paragraph. Upon termination or expiry (as the case may be) or at the end of the Termination Assistance Period (or earlier if this does not adversely affect the Supplier's performance of the Ordered Panel Services and the Termination Assistance and its compliance with the other provisions of this Contract Schedule 2), each Party shall return to the other Party (or if requested, destroy or delete) all Confidential Information of the other Party and shall certify that it does not retain the other Party's Confidential Information save to the extent (and for the limited period) that such information needs to be retained by the Party in question for the purposes of providing or receiving any Ordered Panel Services or termination services or for statutory compliance purposes. Except where this Contract provides otherwise, all licences, leases and authorisations granted by the Customer to the Supplier in relation to the Ordered Panel Services shall be terminated with effect from the end of the Termination Assistance Period.

  • TAX LIMITATION OBLIGATIONS In order to receive and maintain the limitation authorized by Section 2.4, Applicant shall:

  • Information Obligations You will provide information or other materials related to Your Content that we reasonably request to verify your compliance with the DSA. If you become aware of any of the following actual or potential events you shall promptly provide us with reasonable information and assistance regarding their mitigation and resolution: (i) unauthorized use of your Account; (ii) loss or theft of your Account information; (iii) circumstances or incidents affecting the security of the Platform or Services; or (iv) measures by authorities or court decisions specifically relating to your use of Services or the Platform which may affect the Platform or the Services.

  • Notification Obligations (a) If by reason of a Force Majeure Event a Party is wholly or partially unable to carry out its obligations under this Agreement, the affected Party shall:

  • CERTIFICATION PROHIBITING DISCRIMINATION AGAINST FIREARM AND AMMUNITION INDUSTRIES (Texas law as of September 1, 2021) By submitting a proposal to this Solicitation, you certify that you agree, when it is applicable, to the following required by Texas law as of September 1, 2021: If (a) company is not a sole proprietorship; (b) company has at least ten (10) full-time employees; (c) this contract has a value of at least $100,000 that is paid wholly or partly from public funds; (d) the contract is not excepted under Tex. Gov’t Code § 2274.003 of SB 19 (87th leg.); and (e) governmental entity has determined that company is not a sole-source provider or governmental entity has not received any bids from a company that is able to provide this written verification, the following certification shall apply; otherwise, this certification is not required. Pursuant to Tex. Gov’t Code Ch. 2274 of SB 19 (87th session), the company hereby certifies and verifies that the company, or association, corporation, partnership, joint venture, limited partnership, limited liability partnership, or limited liability company, including a wholly owned subsidiary, majority-owned subsidiary parent company, or affiliate of these entities or associations, that exists to make a profit, does not have a practice, policy, guidance, or directive that discriminates against a firearm entity or firearm trade association and will not discriminate during the term of this contract against a firearm entity or firearm trade association. For purposes of this contract, “discriminate against a firearm entity or firearm trade association” shall mean, with respect to the entity or association, to: “(1) refuse to engage in the trade of any goods or services with the entity or association based solely on its status as a firearm entity or firearm trade association; (2) refrain from continuing an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association; or (3) terminate an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association. See Tex. Gov’t Code § 2274.001(3) of SB 19. “Discrimination against a firearm entity or firearm trade association” does not include: “(1) the established policies of a merchant, retail seller, or platform that restrict or prohibit the listing or selling of ammunition, firearms, or firearm accessories; and (2) a company’s refusal to engage in the trade of any goods or services, decision to refrain from continuing an existing business relationship, or decision to terminate an existing business relationship to comply with federal, state, or local law, policy, or regulations or a directive by a regulatory agency, or for any traditional business reason that is specific to the customer or potential customer and not based solely on an entity’s or association’s status as a firearm entity or firearm trade association.” See Tex. Gov’t Code § 2274.001(3) of SB 19.

  • CERTIFICATION PROHIBITING DISCRIMINATION AGAINST FIREARM AND AMMUNITION INDUSTRIES (Texas law as of September 1, 2021) By submitting a proposal to this Solicitation, you certify that you agree, when it is applicable, to the following required by Texas law as of September 1, 2021: If (a) company is not a sole proprietorship; (b) company has at least ten (10) full-time employees; (c) this contract has a value of at least $100,000 that is paid wholly or partly from public funds; (d) the contract is not excepted under Tex. Gov’t Code § 2274.003 of SB 19 (87th leg.); and (e) governmental entity has determined that company is not a sole-source provider or governmental entity has not received any bids from a company that is able to provide this written verification, the following certification shall apply; otherwise, this certification is not required. Pursuant to Tex. Gov’t Code Ch. 2274 of SB 19 (87th session), the company hereby certifies and verifies that the company, or association, corporation, partnership, joint venture, limited partnership, limited liability partnership, or limited liability company, including a wholly owned subsidiary, majority-owned subsidiary parent company, or affiliate of these entities or associations, that exists to make a profit, does not have a practice, policy, guidance, or directive that discriminates against a firearm entity or firearm trade association and will not discriminate during the term of this contract against a firearm entity or firearm trade association. For purposes of this contract, “discriminate against a firearm entity or firearm trade association” shall mean, with respect to the entity or association, to: “(1) refuse to engage in the trade of any goods or services with the entity or association based solely on its status as a firearm entity or firearm trade association; (2) refrain from continuing an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association; or (3) terminate an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association. See Tex. Gov’t Code § 2274.001(3) of SB 19. “Discrimination against a firearm entity or firearm trade association” does not include: “(1) the established policies of a merchant, retail seller, or platform that restrict or prohibit the listing or selling of ammunition, firearms, or firearm accessories; and (2) a company’s refusal to engage in the trade of any goods or services, decision to refrain from continuing an existing business relationship, or decision to terminate an existing business relationship to comply with federal, state, or local law, policy, or regulations or a directive by a regulatory agency, or for any traditional business reason that is specific to the customer or potential customer and not based solely on an entity’s or association’s status as a firearm entity or firearm trade association.” See Tex. Gov’t Code § 2274.001(3) of SB 19.

  • CREDIT UNION LIABILITY FOR FAILURE TO MAKE TRANSFERS If we do not complete a transfer to or from your account on time or in the correct amount according to our agreement with you, we may be liable for your losses or damages. However, we will not be liable for direct or consequential damages in the following events: - If, through no fault of ours, there is not enough money in your accounts to complete the transaction, if any funds in your accounts necessary to complete the transaction are held as uncollected funds pursuant to our Funds Availability Policy Disclosure, or if the transaction involves a loan request exceeding your credit limit. - If you used your card or access code in an incorrect manner. - If the ATM where you are making the transfer does not have enough cash. - If the ATM was not working properly and you knew about the problem when you started the transaction. - If circumstances beyond our control (such as fire, flood, or power failure) prevent the transaction. - If the money in your account is subject to legal process or other claim. - If funds in your account are pledged as collateral or frozen because of a delinquent loan. - If the error was caused by a system of any participating ATM network. - If the electronic transfer is not completed as a result of your willful or negligent use of your card, access code, or any EFT facility for making such transfers. - If the telephone or computer equipment you use to conduct audio response, online/PC, or mobile banking transactions is not working properly and you know or should have known about the breakdown when you started the transaction. - If you have xxxx payment services, we can only confirm the amount, the participating merchant, and date of the xxxx payment transfer made by the Credit Union. For any other error or question you have involving the billing statement of the participating merchant, you must contact the merchant directly. We are not responsible for investigating such errors. - Any other exceptions as established by the Credit Union.

Time is Money Join Law Insider Premium to draft better contracts faster.