Research Collaboration (a) GSK hereby grants to Anacor a non-exclusive, non-royalty bearing license under the GSK IP, solely as and to the extent necessary or important to conduct activities for which Anacor is responsible under the Research Plans during the Research Collaboration Term.
Commercialization License Subject to the terms of this Agreement, including without limitation Section 2.2 and Theravance's Co-Promotion rights in Section 5.3.2, Theravance hereby grants to GSK, and GSK accepts, an exclusive license under the Theravance Patents and Theravance Know-How to make, have made, use, sell, offer for sale and import Alliance Products in the Territory.
Commercialization Activities Within North America, the Parties will use Commercially Reasonable Efforts to Commercialize Licensed Products in the Field. In addition, within North America and subject to Section 2.7.6, the Parties will use Commercially Reasonable Efforts to conduct the Commercialization activities assigned to them pursuant to the Commercialization Plan/Budget, including the performance of detailing in accordance therewith. In conducting the Commercialization activities, the Parties will comply with all Applicable Laws, applicable industry professional standards and compliance policies of Celgene which have been previously furnished to Acceleron, as the same may be updated from time to time and provided to Acceleron. Neither Party shall make any claims or statements with respect to the Licensed Products that are not strictly consistent with the product labeling and the sales and marketing materials approved for use pursuant to the Commercialization Plan/Budget.
Commercialization Plan On a Product by Product basis, not later than sixty (60) days after the filing of the first application for Regulatory Approval of a Product in the Copromotion Territory, the MSC shall prepare and approve a rolling multiyear (not less than three (3) years) plan for Commercializing such Product in the Copromotion Territory (the "Copromotion Territory Commercialization Plan"), which plan includes a comprehensive market development, marketing, sales, supply and distribution strategy for such Product in the Copromotion Territory. The Copromotion Territory Commercialization Plan shall be updated by the MSC at least once each calendar year such that it addresses no less than the three (3) upcoming years. Not later than thirty (30) days after the filing of the first application for Regulatory Approval of a Product in the Copromotion Territory and thereafter on or before September 30 of each calendar year, the MSC shall prepare an annual commercialization plan and budget (the "Annual Commercialization Plan and Budget"), which plan is based on the then current Copromotion Territory Commercialization Plan and includes a comprehensive market development, marketing, sales, supply and distribution strategy, including an overall budget for anticipated marketing, promotion and sales efforts in the upcoming calendar year (the first such Annual Development Plan and Budget shall cover the remainder of the calendar year in which such Product is anticipated to be approved plus the first full calendar year thereafter). The Annual Commercialization Plan and Budget will specify which Target Markets and distribution channels each Party shall devote its respective Promotion efforts towards, the personnel and other resources to be devoted by each Party to such efforts, the number and positioning of Details to be performed by each Party, as well as market and sales forecasts and related operating expenses, for the Product in each country of the Copromotion Territory, and budgets for projected Pre-Marketing Expenses, Sales and Marketing Expenses and Post-Approval Research and Regulatory Expenses. In preparing and updating the Copromotion Territory Commercialization Plan and each Annual Commercialization Plan and Budget, the MSC will take into consideration factors such as market conditions, regulatory issues and competition.
Commercialization Intrexon shall have the right to develop and Commercialize the Reverted Products itself or with one or more Third Parties, and shall have the right, without obligation to Fibrocell, to take any such actions in connection with such activities as Intrexon (or its designee), at its discretion, deems appropriate.
Development and Commercialization Subject to Sections 4.6 and 4.7, Fibrocell shall be solely responsible for the development and Commercialization of Fibrocell Products and Improved Products. Fibrocell shall be responsible for all costs incurred in connection with the Fibroblast Program except that Intrexon shall be responsible for the following: (a) costs of establishing manufacturing capabilities and facilities in connection with Intrexon’s manufacturing obligation under Section 4.6 (provided, however, that Intrexon may include an allocable portion of such costs, through depreciation and amortization, when calculating the Fully Loaded Cost of manufacturing a Fibrocell Product, to the extent such allocation, depreciation, and amortization is permitted by US GAAP, it being recognized that the majority of non-facilities scale-up costs cannot be capitalized and amortized under US GAAP); (b) costs of basic research with respect to the Intrexon Channel Technology and Intrexon Materials (i.e., platform improvements) but, for clarity, excluding research described in Section 4.7 or research requested by the JSC for the development of a Fibrocell Product or an Improved Product (which research costs shall be reimbursed by Fibrocell); (c) [*****]; and (d) costs of filing, prosecution and maintenance of Intrexon Patents. The costs encompassed within subsection (a) above shall include the scale-up of Intrexon Materials and related active pharmaceutical ingredients for clinical trials and Commercialization of Fibrocell Products undertaken pursuant to Section 4.6, which shall be at Intrexon’s cost whether it elects to conduct such efforts internally or through Third Party contractors retained by either Intrexon or Fibrocell (with Intrexon’s consent).
Manufacturing Technology Transfer With respect to each Technology Transfer Product, upon AbbVie’s written request after the Inclusion Date for the Included Target to which such Technology Transfer Product is Directed, Morphic shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party manufacturer) of all Morphic Know-How and Joint Know-How relating to the then-current process for the Manufacture of such Technology Transfer Product (the “Manufacturing Process”) and to implement the Manufacturing Process at facilities designated by AbbVie (such transfer and implementation, as more fully described in this Section 5.3, the “Manufacturing Technology Transfer”). To assist with the Manufacturing Technology Transfer, Morphic will make its personnel reasonably available to AbbVie during normal business hours for up to [***] FTE hours with respect to each Included Target (in each case, free of charge to AbbVie) to transfer and implement the Manufacturing Process under this Section 5.3. Thereafter, if requested by AbbVie, Morphic shall continue to perform such obligations; provided, that AbbVie will reimburse Morphic for its full-time equivalent (FTE) costs (for clarity, in excess of [***] FTE hours) and any reasonable and verifiable out-of-pocket costs incurred in providing such assistance. CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY [***], HAS BEEN OMITTED BECAUSE IT IS NOT MATERIAL AND WOULD LIKELY CAUSE COMPETITIVE HARM TO THE COMPANY IF PUBLICLY DISCLOSED.
Clinical Trials The studies, tests and preclinical and clinical trials conducted by or on behalf of, or sponsored by, the Company, or in which the Company has participated, that are described in the Registration Statement, the Time of Sale Disclosure Package or the Prospectus, or the results of which are referred to in the Registration Statement, the Time of Sale Disclosure Package or the Prospectus, were and, if still pending, are being conducted in all material respects in accordance with protocols, procedures and controls pursuant to, where applicable, accepted professional and scientific standards for products or product candidates comparable to those being developed by the Company and all applicable statutes, rules and regulations of the FDA, the EMEA, Health Canada and other comparable drug and medical device (including diagnostic product) regulatory agencies outside of the United States to which they are subject; the descriptions of the results of such studies, tests and trials contained in the Registration Statement, the Time of Sale Disclosure Package or the Prospectus do not contain any misstatement of a material fact or omit a material fact necessary to make such statements not misleading; the Company has no knowledge of any studies, tests or trials not described in the Disclosure Package and the Prospectus the results of which reasonably call into question in any material respect the results of the studies, tests and trials described in the Registration Statement, the Time of Sale Disclosure Package or Prospectus; and the Company has not received any notices or other correspondence from the FDA, EMEA, Health Canada or any other foreign, state or local governmental body exercising comparable authority or any Institutional Review Board or comparable authority requiring or threatening the termination, suspension or material modification of any studies, tests or preclinical or clinical trials conducted by or on behalf of, or sponsored by, the Company or in which the Company has participated, and, to the Company’s knowledge, there are no reasonable grounds for the same. Except as disclosed in the Registration Statement, the Time of Sale Disclosure Package and the Prospectus, there has not been any violation of law or regulation by the Company in its respective product development efforts, submissions or reports to any regulatory authority that could reasonably be expected to require investigation, corrective action or enforcement action.
Formation; Composition Each Party will initially appoint [***] representatives to the JCC, with each representative having knowledge and expertise in the commercialization of products similar to the Regional Licensed Products and having sufficient seniority within the applicable Party to make decisions arising within the scope of the JCC’s responsibilities. The JCC may change its size from time to time by mutual consent of its members, provided that the JCC will consist at all times of an equal number of representatives of each of Surface and Novartis. Each Party may replace its JCC representatives at any time upon written notice to the other Party. The JCC may invite non-members to participate in the discussions and meetings of the JCC, provided that such participants have no voting authority at the JCC and are bound under written obligation of confidentiality no less protective of the Parties’ Confidential Information than those set forth in this Agreement. The JCC will be co-chaired, with one chairperson designated by Surface and [***] designated by Novartis, whose responsibilities will include conducting meetings, including, when feasible, ensuring that objectives for each meeting are set and achieved. Responsibility for running each meeting of the JCC will alternate between the chairpersons from meeting-to-meeting, with Novartis’s chairperson running the first meeting. CERTAIN CONFIDENTIAL PORTIONS OF THIS EXHIBIT WERE OMITTED AND REPLACED WITH “[***]”. A COMPLETE VERSION OF THIS EXHIBIT HAS BEEN FILED SEPARATELY WITH THE SECRETARY OF THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO AN APPLICATION REQUESTING CONFIDENTIAL TREATMENT PURSUANT TO RULE 406 PROMULGATED UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
Formation and Composition Within [ * ] after the Signing Date, the Parties shall establish a Joint Development Committee that shall oversee the Development and Manufacture (for Development) of Collaboration Products in Field in the Territory in accordance with the Development Plans for such Collaboration Products and to coordinate the Development and related Manufacturing activities of the Parties with respect to such Collaboration Products. Each Party shall initially appoint three (3) representatives to the JDC, each of whom will be an officer or employee of such Party and will have knowledge and expertise in the Development or Manufacture of products similar to the Collaboration Products and sufficient seniority within the applicable Party to make decisions arising within the scope of the JDC’s responsibilities. The JDC may change its size from time to time by mutual consent of its members. Each Party may replace its JDC representatives at any time upon written notice to the other Party. The JDC may invite non-members (including consultants and advisors of a Party who are under an obligation of confidentiality consistent with this Agreement) to participate in the discussions and meetings of the JDC, provided that such participants shall have no voting authority at the JDC. The JDC shall have a chairperson. Each Party shall have the right, on an alternating Calendar Year basis, to select from among its JDC representatives a representative to serve as the chairperson of the JDC during such Calendar Year. Such Party shall have the right during such Calendar Year to replace the chairperson of the JDC with one of its other JDC representatives. The initial chairperson shall be designated by [ * ]. The role of the chairperson shall be to convene and preside at meetings of the JDC, to prepare agendas (with due input from the other Party’s representatives), circulate agendas and to ensure the preparation of meeting minutes, but the chairperson shall have no additional powers or rights beyond those held by the other JDC representatives.
