Development Responsibilities From and after the Effective Date, BMS shall assume sole responsibility for the Development of Compounds and Products in the Field in the Territory during the Term at its own cost and expense (including responsibility for all funding, resourcing and decision-making, subject to Sections 3.3 and 3.4), except with respect to the performance by Ambrx of the Research Program activities assigned to Ambrx pursuant to the Research Plan and as otherwise may be agreed upon by the Parties in writing. BMS, by itself or through its Affiliates and Sublicensees, shall use Diligent Efforts to Develop a Compound or Product in the Field in accordance with the Development Plan for the purpose of obtaining a Regulatory Approval in each Major Market. For clarity, it is understood and acknowledged that Diligent Efforts in the Development of Compounds and Products may include sequential implementation of Clinical Trials and/or intervals between Clinical Trials for data interpretation and clinical program planning and approval.
Development Plans Shipper has provided Gatherer with a report attached hereto as Exhibit D (the “Current Development Plan”) describing in detail, as of January 1, 2017, the planned development, drilling, and production activities to take place with respect to Dedicated Production for the applicable Development Period. The information contained in the TERMS IN THIS EXHIBIT HAVE BEEN REDACTED BECAUSE CONFIDENTIAL TREATMENT FOR THOSE TERMS HAS BEEN REQUESTED. THE REDACTED MATERIAL HAS BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION, AND THE TERMS HAVE BEEN MARKED AT THE APPROPRIATE PLACE WITH TWO ASTERISKS (**). Current Development Plan is broken out on a Subsystem-by-Subsystem basis and, with respect to the first three Years covered by the Current Development Plan, on a Quarter-by-Quarter basis, and with respect to the remaining Years covered by the Current Development Plan, on a Year-by-Year basis. The Current Development Plan attached hereto has been approved by the Parties.
(a) From time to time during each Year of the Term, the Parties shall meet to discuss the planned development, drilling, and production activities that Shipper expects to take place with respect to Dedicated Production for the then-applicable Development Period. Shipper and Gatherer shall each make their respective representatives available to participate in such meetings and discussions. No later than August 1 of each such Year, Shipper shall provide (or cause to be provided) to Gatherer a proposed update of the then-currently agreed Development Plan, prepared on the same basis as the Current Development Plan and describing in detail the planned development, drilling, and production activities to take place with respect to Dedicated Production for the then-applicable Development Period (any such update, an “Updated Development Plan” and, together with the Current Development Plan, each, a “Development Plan”). Notwithstanding anything herein to the contrary, in no event shall Gatherer be required to agree to any Updated Development Plan and corresponding updated Gathering System Plan that contains a Committed Build-Out that (i) has a corresponding Target Completion Date that occurs after the end of the Initial Term, and (ii) Gatherer, in its sole discretion, does not wish to approve.
(b) Each proposed Development Plan shall include information as to the following, in each case, broken out on a Subsystem-by-Subsystem basis and, with respect to the first three Years covered by such Development Plan, on a Quarter-by-Quarter basis, and, with respect to the remaining Years covered by such Development Plan, on a Year-by-Year basis:
(i) all Xxxxx that, as of the date such Development Plan was delivered, are currently in existence and (A) the production therefrom is being delivered into the Gathering System, or (B) are awaiting connection to the Gathering System;
(ii) the Xxxxx that are expected to be drilled during the time period covered by such Development Plan (each such Well reflected in such Development Plan, a “Planned Well”), and the estimated timing of the drilling of such Planned Xxxxx;
(iii) forward-looking production estimates for the applicable time period covered by such Development Plan for all Shipper Gas (A) that Shipper reasonably and in good faith believes will become owned or Controlled by Shipper during the time period covered by such Development Plan, and/or (B) that will be produced from (I) in the aggregate, all Xxxxx then-existing and (II) in the aggregate, any Planned Xxxxx included in such Development Plan (such collective estimates described in subsections (A) and (B), both with respect to a particular Quarter and an entire Year, the “Dedicated Production Estimates”); TERMS IN THIS EXHIBIT HAVE BEEN REDACTED BECAUSE CONFIDENTIAL TREATMENT FOR THOSE TERMS HAS BEEN REQUESTED. THE REDACTED MATERIAL HAS BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION, AND THE TERMS HAVE BEEN MARKED AT THE APPROPRIATE PLACE WITH TWO ASTERISKS (**).
(iv) forward-looking estimates for the applicable time period covered by such Development Plan of the aggregate volumes of those Shipper Injected Liquids that Shipper intends to Tender to the Injection Points hereunder to receive the System Services (such estimates, both with respect to a particular Quarter and an entire Year, the “System Liquids Estimates” and, together with the Dedicated Production Estimates, the “System Production Estimates”);
(v) (A) each new receipt point (including the location thereof) proposed by Shipper with respect to the System Production Estimate reflected in such Development Plan (each such receipt point, including those located at the site of a Planned Well, a “Planned Receipt Point”), (B) each Receipt Point at which Shipper expects to Tender Shipper Gas and/or Shipper Injected Liquids reflected in such Development Plan into the Gathering System, and (C) the estimated portion of the System Production Estimate contained in such Development Plan that Shipper expects to Tender at each such Receipt Point and Planned Receipt Point;
(vi) the earliest date on which each Planned Well included in the Development Plan is estimated to be completed and producing, which date shall not be earlier than three Months after the January 1st that is immediately subsequent to the date that the Development Plan that initially reflected such Planned Well was delivered to Gatherer hereunder;
(vii) the anticipated characteristics of the production from the Xxxxx and Planned Xxxxx reflected in such Development Plan (including liquids content and gas and liquids composition) and the projected production volumes and production pressures applicable thereto; provided that Shipper may utilize the existing and historical production information from similarly situated Xxxxx;
(viii) (A) each new delivery point (including the location thereof) proposed by Shipper with respect to the System Production Estimate reflected in such Development Plan (each such delivery point, a “Planned Delivery Point”), (B) each Delivery Point at which Shipper expects Shipper Gas produced from the Xxxxx and Planned Xxxxx reflected in such Development Plan to be redelivered to Shipper, (C) each Delivery Point at which Shipper expects any Drip Liquids allocated to Shipper in accordance with this Agreement and/or Shipper Injected Liquids to be redelivered to Shipper, and (D) the estimated portion of the System Production Estimate contained in such Development Plan that Shipper expects to be redelivered to Shipper at each such Delivery Point and Planned Delivery Point;
(ix) any (A) proposed revision to the then-existing Dedicated Area and/or any then-existing Dedicated Contract and/or (B) any new contract that Shipper proposes to be a Dedicated Contract; and
(x) other information reasonably requested by Gatherer that is relevant to the design, construction, and operation of the Gathering System, including (A) any Subsystem Extension proposed by Shipper, (B) the relevant Receipt Point, Planned Receipt Point, Delivery Point and Planned Delivery Point facilities applicable to such TERMS IN THIS EXHIBIT HAVE BEEN REDACTED BECAUSE CONFIDENTIAL TREATMENT FOR THOSE TERMS HAS BEEN REQUESTED. THE REDACTED MATERIAL HAS BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION, AND THE TERMS HAVE BEEN MARKED AT THE APPROPRIATE PLACE WITH TWO ASTERISKS (**). Development Plan, and (C) any treating, processing, or liquids handling facilities proposed by Shipper that may be required for any Shipper Gas and/or Shipper Injected Liquids to meet applicable Downstream Facility specifications at the Delivery Points.
Joint Responsibilities The relationship between SAE ITC, the Activities and its Members shall be, and at all times, advisory only, and no party shall have the authority to enter into any contract or commitment in the name of, or on behalf of, any other party. Nothing in this Agreement shall be construed to confer upon either party the status of employee, agent, partner, joint venturer or legal representative of the other, it being intended by all parties to remain independent legal entities solely responsible for its own actions.
Department Responsibilities The use of sick leave may properly be denied if these procedures are not followed. Abuse of sick leave on the part of the employee is cause for disciplinary action. Departmental approval of sick leave is a certification of the legitimacy of the sick leave claim. The department head or designee may make reasonable inquiries about employee absences. The department may require medical verification for an absence of three (3) or more working days. The department may also require medical verification for absences of less than three (3) working days for probable cause if the employee had been notified in advance in writing that such verification was necessary. Inquiries may be made in the following ways:
1. Calling the employee's residence telephone number or other contact telephone number provided by the employee if telephone notification was not made in accordance with departmental sick leave call-in guidelines. These inquiries shall be subject to any restrictions imposed by the employee under Section 14.4.a.
2. Obtaining the employee's signature on the Absence/Overtime Record, or on another form established for that purpose, as employee certification of the legitimacy of the claim.
3. Obtaining the employee's written statement regarding the sick leave claim and duration.
4. Requiring the employee to obtain a physician's certificate or verification of the employee's illness, date(s) the employee was incapacitated, and the employee's ability to return to work, as specified above.
5. In absences of an extended nature, requiring the employee to obtain from their physician a statement of progress and anticipated date on which the employee will be able to return to work, as specified above. Department heads are responsible for establishing timekeeping procedures which will insure the submission of a time card covering each employee absence and for operating their respective offices in accordance with these policies and with clarifying regulations issued by the Office of the County Administrator. To help assure uniform policy application, the Director of Human Resources or designated management staff of the County Human Resources Department should be contacted with respect to sick leave determinations about which the department is in doubt.
Development Plan document specifying the work program, schedule, and relevant investments required for the Development and the Production of a Discovery or set of Discoveries of Oil and Gas in the Concession Area, including its abandonment.
Regulatory Responsibilities 6.6.1 From and after the Closing, subject to the terms of the Transition Services Agreement and except as required by a Party to comply with applicable Law or to exercise its rights and obligations hereunder or under any other Ancillary Agreement, Purchaser shall have the sole right and responsibility for preparing, obtaining and maintaining all Regulatory Approvals necessary for the Product Business, and for conducting communications with Governmental Authorities of competent jurisdiction, for Seller Products. Without limitation of the foregoing, promptly following the Closing, Purchaser shall obtain such FDA approvals as are necessary for Purchaser’s own Product labeling and shall comply with such FDA approvals upon receipt thereof.
6.6.2 Subject to the terms of the Transition Services Agreement from and after the Closing, Seller shall support Purchaser, as may be reasonably necessary and practicable, at Purchaser’s cost and expense, in preparing, obtaining and maintaining all Regulatory Approvals for the Seller Products, including providing necessary documents or other materials required by applicable Law for Purchaser to obtain or maintain such Regulatory Approvals, in each case, in accordance with the terms and conditions of this Agreement.
6.6.3 Except to the extent otherwise provided in the Transition Services Agreement, from and after the Closing, Seller shall provide Purchaser with (i) copies of all written or electronic correspondence relating to any Seller Product received by Seller, its Affiliates, licensees, sublicensees or distributors from, or submitted by Seller, its Affiliates, licensees, sublicensees or distributors to, Regulatory Authorities; and (ii) copies of all meeting minutes and other similar summaries of all meetings, conferences and discussions held by Seller with Regulatory Authorities to the extent relating to any Seller Product, including copies of all contact reports produced by Seller and its Affiliates, licensees, sublicensees and distributors, in each case ((i) and (ii)), within ten (10) Business Days after Seller’s receipt, submission or production of the foregoing, as applicable. To the extent applicable, Seller shall provide Purchaser a draft of any written response thereto reasonably in advance (in light of the prevailing circumstances) of submitting such response to the applicable Regulatory Authorities.
Client Responsibilities You are responsible for (a) assessing each participants’ suitability for the Training, (b) enrollment in the appropriate course(s) and (c) your participants’ attendance at scheduled courses.
Professional Development Plan Professional Development Plan (PDP) refers to plans developed by faculty members addressing the criteria contained in Article 22 and Appendix G.
Student Responsibilities The school provided Chromebook for the student is an important learning tool to be used for educational purposes. In order to use the device each day, the student must be willing to accept the following responsibilities: ● I understand that district officials have the ability to monitor my use of the device AT ALL TIMES IN AND OUT OF SCHOOL and that communications, files, internet search activities, and any other actions using the device are not considered to be private. Note: RCCSD does not have the ability to and will not remotely operate the camera on the device. However, students can cover it when not in use to ensure others are not. ● I understand that the device assigned to me is on loan from Red Clay Consolidated School District. All accounts, programs, and files are subject to inspection at any time without notice. ● I will be responsible for ALL damage or loss of the device due to NEGLECT OR ABUSE including dropping it, getting it wet, and spills of food or drink. ● I will not try to repair my Chromebook. ● At ALL times when using my Chromebook, I will follow the Acceptable Use, Internet Safety Policy, and Student Code of Conduct, and related policies adopted by the Board of Education, and abide by all local, state, and federal laws. ● I will talk with my parent/guardian about their ground rules for going online when not at school. ● I will notify the school principal and my parents of any damage to the device as soon as possible. ● I will charge the Chromebook battery each night and will bring my Chromebook to school every day or be prepared for remote learning. ● I will keep my Chromebook clean. ● I will not lend my device to anyone. This includes family members and friends. Note: I could be held responsible for any inappropriate content on the District issued Chromebook. ● I will keep all passwords assigned to me secure. ● I will only use my account credentials to sign into my Chromebook. ● I am allowed to connect to non-district printers and wireless networks at home and in public places. ● I agree that e-mail or any other computer communication should be used only for appropriate, legitimate, and responsible communication. ● I agree not to share personal information about myself (full name, address, etc.) or about my family, friends or anyone else. ● I agree not to search for, download, display, post, or distribute vulgar, offensive material or images described in applicable district policies. (See the student handbook and/or the district's Acceptable Use Agreement.) ● I agree to abide by all school rules that address electronic device procedures. ● I will return the device when requested, at the end of the school year or upon my withdrawal. ● I agree to not deface or destroy this property in any way. Inappropriate use of the machine may result in the student losing their right to use the Chromebook. ● I understand that identification labels have been placed on the Chromebook. These labels are not to be removed or modified. Additional stickers, labels, tags, or markings of any kind are NOT to be added to the machine.
Development Activities The Development activities referred to in item “b” of paragraph 3.1 include: studies and projects of implementation of the Production facilities; drilling and completion of the Producing and injection xxxxx; and installation of equipment and vessels for extraction, collection, Treatment, storage, and transfer of Oil and Gas. The installation referred to in item “c” includes, but is not limited to, offshore platforms, pipelines, Oil and Gas Treatment plants, equipment and facilities for measurement of the inspected Production, wellhead equipment, production pipes, flow lines, tanks, and other facilities exclusively intended for extraction, as well as oil and gas pipelines for Production Outflow and their respective compressor and pumping stations.
