Early Adopter Use Sample Clauses

Early Adopter Use. Tripwire may offer pre-release feature capabilities for experimental testing and evaluation (“Early Adopter Program” or “EAP”). If Customer chooses to participate in the Early Adopter Program, and Tripwire authorizes Customer to participate in such EAP, Tripwire grants to Customer a temporary, nontransferable, nonexclusive license for experimental use to access, test, and evaluate pre-release feature capabilities in Customer’s non-production environment, subject to usage entitlement. Pre-release capabilities are not for sale. The restrictions set forth in Section 4.3, 4.4, and 4.5 apply to pre-release capabilities. Tripwire shall have no obligation to continue to offer any pre-release capabilities or to offer a commercial version of the pre-release capabilities in any form.
AutoNDA by SimpleDocs

Related to Early Adopter Use

  • Early Access Subject to Tenant’s delivery of an executed original of this Lease, the prepaid Base Rent and the Letter of Credit as required elsewhere in this Lease, and the insurance certificates evidencing Tenant’s insurance policies required under this Lease, Landlord shall provide Tenant with early access to the Premises on the latest to occur of (i) the first (1st) Business Day following the date of mutual execution and delivery of this Lease, (ii) the first (1st) Business Day following the date on which Landlord determines the Premises is free and clear of any existing tenancy, and (iii) fifteen (15) days prior to Landlord’s then-estimated date of delivery of the Premises (in any case, the “Access Date”). Such period of early access shall commence on the Access Date and continue through the date immediately preceding the Commencement Date (the “Early Access Period”), and Tenant’s access during the Early Access Period shall be subject to all of the terms and conditions of this Lease, except for Tenant’s obligation to pay Rent (which obligation shall commence upon the Commencement Date, subject to the abatement of Base Rent provided in the Basic Lease Information). Notwithstanding the foregoing, the conduct of business in the Premises shall cause an immediate acceleration of the Commencement Date to the date of Tenant’s initial conduct of business in the Premises. During the Early Access Period, Tenant may enter the Premises (but not any other portion of the Building or the Project other than for ingress and egress) for the sole purpose of installing cabling, furniture, fixtures and equipment, provided that Tenant shall be solely responsible for all of the foregoing and for any loss or damage thereto from any cause whatsoever. Such early access and installation shall be permitted only to the extent that such early access and installation activities will not interfere with the access, use and occupancy of the Building or the Project by Landlord or any other tenant or occupant and/or Landlord’s performance of the Work and/or otherwise delay Landlord’s delivery of possession of the Premises to Tenant in the condition required under this Lease. The provisions of Sections 8(a) and 11 of this Lease shall apply in full during the Early Access Period, and Tenant shall (x) provide certificates of insurance evidencing the existence and amounts of liability insurance carried by Tenant and its agents and contractors, reasonably satisfactory to Landlord, prior to and as a condition to such early access, and (y) comply with all Laws applicable to such early access work in the Premises. If Landlord reasonably determines that Tenant’s early access is interfering in any material way with Landlord’s ability to deliver possession of the Premises in the condition required under this Lease and/or to complete the Work, then Landlord shall have the right to limit or otherwise restrict Tenant’s access during the Early Access Period without any liability.

  • Procedures for Providing NP Through Full NXX Code Migration Where a Party has activated an entire NXX for a single Customer, or activated at least eighty percent (80%) of an NXX for a single Customer, with the remaining numbers in that NXX either reserved for future use by that Customer or otherwise unused, if such Customer chooses to receive Telephone Exchange Service from the other Party, the first Party shall cooperate with the second Party to have the entire NXX reassigned in the LERG (and associated industry databases, routing tables, etc.) to an End Office operated by the second Party. Such transfer will be accomplished with appropriate coordination between the Parties and subject to appropriate industry lead times for movements of NXXs from one switch to another. Neither Party shall charge the other in connection with this coordinated transfer.

  • Assistance with Business Combination For a period of ninety days following the Effective Date, in the event any person or entity (regardless of any FINRA affiliation or association) is engaged to assist the Company in its search for a Business Combination candidate or to provide any similar Business Combination-related services, the Company will provide the following information (the “Business Combination Information”) to the Representative: (i) complete details of all services and copies of agreements governing such services (which details or agreements may be appropriately redacted to account for privilege or confidentiality concerns); and (ii) justification as to why the person or entity providing the Business Combination-related services should not be considered an “underwriter and related person” with respect to the Company’s initial public offering, as such term is defined in Rule 5110 of FINRA’s Conduct Rules. The Company also agrees that proper disclosure of such arrangement or potential arrangement will be made in the proxy statement which the Company will file for purposes of soliciting shareholder approval for the Business Combination. Upon the Company’s delivery of the Business Combination Information to the Representative, the Company hereby expressly authorizes the Representative to provide such information directly to FINRA as a result of representations the Representative have made to FINRA in connection with the Offering.

  • Early Entry After receipt of a Certificate of Insurance from Tenant, Landlord shall permit Tenant to enter upon the Premises from and after the date of full execution of this Lease for the purpose of monitoring the planning and construction of the Tenant Improvements consisting of the Initial Installation by Landlord, in accordance with the provisions of EXHIBIT C, installing its furniture, fixtures and telephone, internet and data communications cabling and wiring, excluding the conduct of its business. Such early entry shall be at Tenant’s sole risk and subject to all the terms and provisions hereof, except for the payment of Monthly Rent which shall commence on the date set forth in Paragraph 4.B. Whereupon certain Suites are currently occupied by other tenants, immediately upon vacation of such Suites by the existing tenants, Tenant will be granted access to such Suites. With respect to Suites not currently occupied by other tenants, Tenant will be granted access immediately upon execution of this Lease and provision of a Certificate of Insurance as set forth herein. Upon reasonable prior written notice to Landlord, and subject to Landlord’s completion of any Tenant Improvements requested by Tenant pursuant to EXHIBIT C with respect thereto, Tenant will have the right to occupy Suite 2118 up to ninety (90) days prior to the Commencement Date. Should Tenant request occupancy of Suite 2118 prior to the Commencement Date, the parties will agree in writing upon a date certain for the commencement of such occupancy, and the rights and obligations of the Parties pursuant to this Lease with respect to Suite 2118, including, without limitation, Tenant’s obligation to pay Rent with respect to Suite 2118, shall be effective upon the date of such occupancy. Early occupancy by Tenant of any portion of the Premises, including Suite 2118, shall not cause the expiration date of this Lease to be later or earlier than July 12, 2014.

  • Unbundled Loop Modifications (Line Conditioning 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Subloop that may diminish the capability of the Loop or Subloop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the BellSouth’s TR 73600 Unbundled Local Loop Technical Specification. 2.5.2 BellSouth will remove load coils only on copper Loops and Subloops that are less than eighteen thousand (18,000) feet in length. 2.5.3 For any copper loop being ordered by NewPhone which has over six thousand (6,000) feet of combined bridged tap will be modified, upon request from NewPhone, so that the loop will have a maximum of six thousand (6,000) feet of bridged tap. This modification will be performed at no additional charge to NewPhone. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper Loop that will result in a combined total of bridged tap between two thousand five hundred (2,500) and six thousand (6,000) feet will be performed at the rates set forth in Exhibit A. 2.5.4 NewPhone may request removal of any unnecessary and non-excessive bridged tap (bridged tap between zero (0) and two thousand five hundred (2,500) feet which serves no network design purpose), at rates pursuant to BellSouth’s SC Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If NewPhone requests ULM on a reserved facility for a new Loop order, BellSouth may perform a pair change and provision a different Loop facility in lieu of the reserved facility with ULM if feasible. The Loop provisioned will meet or exceed specifications of the requested Loop facility as modified. NewPhone will not be charged for ULM if a different Loop is provisioned. For Loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the Loop provisioned. 2.5.8 NewPhone shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that NewPhone desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for NewPhone, NewPhone will submit a SI to BellSouth. If a spare Loop facility that meets the Loop modification specifications requested by NewPhone is available at the location for which the ULM was requested, NewPhone will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, NewPhone will not be charged for ULM but will only be charged the service order charges for submitting an order.

  • Overstandard Tenant Use If Tenant uses water, electricity, heat or air conditioning in excess of that supplied by Landlord pursuant to Section 6.1 of this Lease, Tenant shall pay to Landlord, upon billing, the cost of such excess utility consumption, the cost of the installation, operation, and maintenance of equipment which is required to be installed in order to supply such excess consumption; and, to the extent no previously installed, Landlord may install devices to separately sub-meter any increased use and in such event Tenant shall pay the increased cost directly to Landlord, on demand, at the rates charged by the public utility company furnishing the same, including the cost of such additional metering (or sub-metering) devices. Tenant’s use of electricity shall never exceed the capacity of the feeders to the Property or the risers or wiring installation; provided, however, Tenant shall have the right, subject to the terms of Article 8, to increase such capacity. Notwithstanding anything to the contrary in this Lease, Tenant may operate the HVAC within the Premises at its discretion; provided, however, if Tenant desires to use heat, ventilation or air conditioning during hours other than those for which Landlord is obligated to supply such utilities pursuant to the terms of Section 6.1 of this Lease, Tenant shall reimburse Landlord for the actual cost of supplying chilled water and gas to the Premises during non-Building Hours at the actual rates charged by the utilities, which cost shall be equitably prorated among all Building occupants (other than the Bank) operating HVAC during the same non-Building Hours. For purposes of an example, Exhibit K, attached hereto, sets forth the calculation of such actual utilities costs, with the actual calculation being subject to the actual rates charged by the utilities. Landlord shall, at its sole cost, as part of the Core and Shell Work, provide a cloud-based software system (Workspeed) to allow Tenant to control Tenant’s after-hours HVAC.

  • Payment of Deferred Underwriting Commission on Business Combination Upon the consummation of the Company’s initial Business Combination, the Company agrees that it will cause the Trustee to pay the Deferred Underwriting Commission directly from the Trust Account to the Underwriters, in accordance with Section 1.3.

  • Provisioning Line Splitting and Splitter Space 3.8.1 The Data LEC, Voice CLEC or BellSouth may provide the splitter. When Southern Telecom or its authorized agent owns the splitter, Line Splitting requires the following: a non-designed analog Loop from the serving wire center to the NID at the End User’s location; a collocation cross connection connecting the Loop to the collocation space; a second collocation cross connection from the collocation space connected to a voice port; the high frequency spectrum line activation, and a splitter. The Loop and port cannot be a Loop and port combination (i.e. UNE-P), but must be individual stand-alone Network Elements. When BellSouth owns the splitter, Line Splitting requires the following: a non designed analog Loop from the serving wire center to the NID at the End User’s location with CFA and splitter port assignments, and a collocation cross connection from the collocation space connected to a voice port. 3.8.2 An unloaded 2-wire copper Loop must serve the End User. The meet point for the Voice CLEC and the Data LEC is the point of termination on the MDF for the Data LEC's cable and pairs. 3.8.3 The foregoing procedures are applicable to migration to Line Splitting Service from a UNE-P arrangement, BellSouth Retail Voice Service, BellSouth High Frequency Spectrum (CO Based) Line Sharing. 3.8.4 For other migration scenarios to line splitting, BellSouth will work cooperatively with CLECs to develop methods and procedures to develop a process whereby a Voice CLEC and a Data LEC may provide services over the same Loop.

  • No Legal Impediment to Issuance and/or Sale No action shall have been taken and no statute, rule, regulation or order shall have been enacted, adopted or issued by any federal, state or foreign governmental or regulatory authority that would, as of the Closing Date or the Additional Closing Date, as the case may be, prevent the issuance or sale of the Shares by the Company; and no injunction or order of any federal, state or foreign court shall have been issued that would, as of the Closing Date or the Additional Closing Date, as the case may be, prevent the issuance or sale of the Shares by the Company.

  • TERMINATION OF ORDERS Participating Entities may terminate an order, in whole or in part, immediately upon notice to Supplier in the event of any of the following events: 1. The Participating Entity fails to receive funding or appropriation from its governing body at levels sufficient to pay for the equipment, products, or services to be purchased; or 2. Federal, state, or provincial laws or regulations prohibit the purchase or change the Participating Entity’s requirements.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!