Effects of Layoff 15.6.1 Upon request of the Association within five (5) working days, the parties shall meet and negotiate upon the specific impact of such layoff upon bargaining unit members to the extent that such matters are within the lawful scope of representation, and is not specified within this Agreement. It is agreed and understood that the District has the right to implement layoffs pursuant to this Article even though the parties may not have concluded the above bargaining concerning the impact of such layoffs. Nothing in this article shall preclude either party from requesting and commencing negotiations on any effects of layoff.
15.6.2 The District shall not transfer work of the bargaining unit to certificated, confidential, management or supervisory employees, or to volunteers, prisoners, or substitute employees or to other bargaining unit employees in different classifications or sub contract out the bargaining unit work performed by laid off employees or employees who have suffered a reduction in hours/work year.
15.6.3 Any extra hours that become available in a classification that has suffered a layoff, causing an employee to return to a lower classification or reduction in hours due to layoff, shall be given to any employee within that classification who has suffered such layoff or reduction in hours. Awarded hours will be rotated between all affected employees based on seniority until made whole, after which, extra hours will be given on the normal seniority rotation.
15.6.4 The District shall not increase the current and existing workload of remaining bargaining unit employees. This does not preclude the changes to assignments within the classification.
15.6.5 The District may use volunteers and/or students to enhance its educational program but not permit displacements of classified employees nor to allow the District to utilize volunteers in lieu of regular employees during an actual layoff.
15.6.6 Benefited employees who are laid off or who are reduced in hours/work year shall be offered the opportunity to purchase health and welfare benefits subject to carrier rules and/or COBRA in the event of a layoff if the layoff would make them ineligible for health and welfare benefits. This information will be provided by insurance carrier.
15.6.7 Employees placed on the 60 day layoff notice may use available paid personal leave to seek alternative employment.
15.6.8 In the event of the layoff of bus drivers, the District agrees to allow laid off drivers to participate in in-service trainings in order to keep their certificate current. The District will provide requalification training at the time of reinstatement to Red Bluff Joint Union High School District (if necessary).
The Drawings The Drawings are the graphic and pictorial portions of the Contract Documents showing the design, location and dimensions of the Work, generally including plans, elevations, sections, details, schedules and diagrams.
Technical Specifications and Drawings a) The Goods and Related Services supplied under this Contract shall conform to the technical specifications and standards mentioned in Section VI, Schedule of Requirements and, when no applicable standard is mentioned, the standard shall be equivalent or superior to the official standards whose application is appropriate to the Goods' country of origin.
b) The Supplier shall be entitled to disclaim responsibility for any design, data, drawing, specification or other document, or any modification thereof provided or designed by or on behalf of the Procuring Entity, by giving a notice of such disclaimer to the Procuring Entity.
c) Wherever references are made in the Contract to codes and standards in accordance with which it shall be executed, the edition or the revised version of such codes and standards shall be those specified in the Schedule of Requirements. During Contract execution, any changes in any such codes and standards shall be applied only after approval by the Procuring Entity and shall be treated in accordance with GCC Clause 33.
Accuracy of Drawings Submitted All drawings shall be neat and professional in manner and shall be clearly labeled as to locations and type of Product, connections and components. Drawings and diagrams are to be in compliance with accepted drafting standards. Acceptance or approval of such plans shall not relieve the Contractor from responsibility for design or other errors of any sort in the drawings or plans, or from its responsibility for performing as required, furnishing Product, services or installation, or carrying out any other requirements of the intended scope of work.
Alterations, Modifications and Additions Company will, or will cause a Permitted Lessee to, make (or cause to be made) such alterations and modifications in and additions to the Airframe and the Engines as are required from time to time to meet the applicable requirements of the FAA or any applicable government of any other jurisdiction in which the Aircraft is then registered; except for (i) immaterial and non-recurring violations with respect to which corrective measures are being taken promptly by Company (or, if a Lease is then in effect, any Permitted Lessee) upon discovery thereof and (ii) any law, rule, regulation or order the validity or application of which is being contested in good faith by Company (or, if a Lease is then in effect, any Permitted Lessee) in any manner which does not involve any material risk of sale, loss or forfeiture of the Aircraft and does not materially adversely affect Loan Trustee’s interest in the Aircraft. In addition, Company (or any Permitted Lessee), at its own expense, may from time to time add further parts or accessories and make or cause to be made such alterations and modifications in and additions to the Airframe or any Engine as Company (or any Permitted Lessee) deems desirable in the proper conduct of its business, including, without limitation, removal (without replacement) of Parts; provided that no such alteration, modification or addition shall materially diminish the value or utility of the Airframe or such Engine below its value or utility immediately prior to such alteration, modification or addition, assuming that the Airframe or such Engine was then in the condition required to be maintained by the terms of this Indenture, except that the value (but not the utility) of the Airframe or any Engine may be reduced by the value of any such Parts that are removed that Company (or such Permitted Lessee) deems obsolete or no longer suitable or appropriate for use on the Airframe or any Engine. For the avoidance of doubt, Company may make alterations in the passenger configuration of the Aircraft and such alterations shall not be subject to the immediately preceding sentence. All Parts incorporated or installed in or attached or added to the Airframe or any Engine as the result of such alteration, modification or addition shall, without further act, be subject to the Lien of this Indenture. Notwithstanding the foregoing, Company (or any Permitted Lessee) may, at any time, remove any Part from the Airframe or any Engine if such Part: (i) is in addition to, and not in replacement of or substitution for, any Part originally incorporated or installed in or attached to the Airframe or such Engine at the time of delivery thereof to Company or any Part in replacement of, or substitution for, any such Part, (ii) is not required to be incorporated or installed in or attached or added to the Airframe or such Engine pursuant to the first sentence of this Section 7.04(c) and (iii) can be removed from the Airframe or such Engine without materially diminishing the value or utility required to be maintained by the terms of this Indenture that the Airframe or such Engine would have had had such Part never been installed on the Airframe or such Engine. Upon the removal by Company (or any Permitted Lessee) of any Part as permitted by this Section 7.04(c), such removed Part shall, without further act, be free and clear of all rights and interests of Loan Trustee and the Lien of this Indenture and shall no longer be deemed a Part hereunder. Upon request of Company from time to time, Loan Trustee shall execute and deliver to Company instruments reasonably requested by Company confirming the release of any such removed Part from the Lien of this Indenture. Loan Trustee acknowledges that it has no interest in the Excluded Equipment. Notwithstanding the provisions of this Section 7.04(c) or any other term or condition of this Indenture, Company (or any Permitted Lessee) may from time to time install on, and remove from, the Aircraft equipment that is owned by, leased to or conditionally sold to Company (or any Permitted Lessee) (and title to such equipment shall remain vested in Company, such Permitted Lessee, or the lessor or the conditional vendor thereof) if (1) such equipment is Excluded Equipment and (2) the location affected by any such removal, if damaged, is repaired prior to return, in a workmanlike manner, to a condition suitable for commercial passenger service; provided that all costs of installation, removal and replacement shall be the responsibility of Company.
Mandatory Procedures The parties agree that any dispute arising out of or relating to this Agreement shall be resolved solely by means of the procedures set forth in this Article, and that such procedures constitute legally binding obligations that are an essential provision of this Agreement. If either party fails to observe the procedures of this Article, as may be modified by their written agreement, the other party may bring an action for specific performance of these procedures in any court of competent jurisdiction.
As-Built Drawings Within thirty (30) Days of the successful completion of the Acceptance Test, Seller shall provide for Company review a set of the proposed as‑built drawings for the Company-Owned Interconnection Facilities constructed by Seller (and/or its Contractors). Within thirty (30) Days of Company's receipt of the proposed as‑built drawings, Company shall provide Seller with either (i) its comments on the proposed as‑built drawings or (ii) notice of acceptance of the proposed as‑built drawings as final as‑built drawings. If Company provides comments on the proposed as‑built drawings, Seller shall incorporate such comments into a final set of as‑built drawings and provide such final as‑built drawings to Company within twenty (20) Days of Seller's receipt of Company's comments.
Shop Drawings All drawings, prints, diagrams, illustrations, brochures, schedules, and other data that are prepared by Developer, a subcontractor, manufacturer, supplier, or distributor, that illustrate how specific portions of the Work shall be fabricated or installed.
Replacements of Lenders Under Certain Circumstances (a) The Borrower shall be permitted to replace any Lender that (a) requests reimbursement for amounts owing pursuant to Section 2.10, 3.5 or 5.4, (b) is affected in the manner described in Section 2.10(a)(iii) and as a result thereof any of the actions described in such Section is required to be taken or (c) becomes a Defaulting Lender, with a replacement bank or other financial institution, provided that (i) such replacement does not conflict with any Requirement of Law, (ii) no Event of Default under Section 11.1 or 11.5 shall have occurred and be continuing at the time of such replacement, (iii) the Borrower shall repay (or the replacement bank or institution shall purchase, at par) all Loans and other amounts (other than any disputed amounts), pursuant to Section 2.10, 2.11, 3.5 or 5.4, as the case may be) owing to such replaced Lender prior to the date of replacement, (iv) the replacement bank or institution, if not already a Lender, and the terms and conditions of such replacement, shall be reasonably satisfactory to the Administrative Agent, (v) the replaced Lender shall be obligated to make such replacement in accordance with the provisions of Section 13.6 (provided that the Borrower shall be obligated to pay the registration and processing fee referred to therein) and (vi) any such replacement shall not be deemed to be a waiver of any rights that the Borrower, the Administrative Agent or any other Lender shall have against the replaced Lender.
(b) If any Lender (such Lender, a “Non-Consenting Lender”) has failed to consent to a proposed amendment, waiver, discharge or termination that pursuant to the terms of Section 13.1 requires the consent of all of the Lenders affected and with respect to which the Required Lenders shall have granted their consent, then provided no Event of Default then exists, the Borrower shall have the right (unless such Non-Consenting Lender grants such consent) to replace such Non-Consenting Lender by requiring such Non-Consenting Lender to assign its Loans, and its Commitments hereunder to one or more assignees reasonably acceptable to the Administrative Agent, provided that (a) all Obligations of the Borrower owing to such Non-Consenting Lender being replaced shall be paid in full to such Non-Consenting Lender concurrently with such assignment, and (b) the replacement Lender shall purchase the foregoing by paying to such Non-Consenting Lender a price equal to the principal amount thereof plus accrued and unpaid interest thereon and (c) the Borrower shall pay to such Non-Consenting Lender the amount, if any, owing to such Lender pursuant to Section 5.1(b). In connection with any such assignment, the Borrower, Administrative Agent, such Non-Consenting Lender and the replacement Lender shall otherwise comply with Section 13.6.
Ownership of Drawings All copies of Plans, Drawings, Designs, Specifications, and copies of other incidental architectural and engineering work, or copies of other Contract Documents furnished by District, are the property of District. They are not to be used by Developer in other work and, with the exception of signed sets of Contract Documents, are to be returned to District on request at completion of Work, or may be used by District as it may require without any additional costs to District. Neither Developer nor any Subcontractor, or material or equipment supplier shall own or claim a copyright in the Drawings, Specifications, and other documents prepared by the Architect. District hereby grants Developer, Subcontractors, sub-subcontractors, and material or equipment suppliers a limited license to use applicable portions of the Drawings prepared for the Project in the execution of their Work under the Contract Documents.
